Brand

Rating

Price

Special Offers

Like in Elastollan®, Ultrafuse TPU 85A has excellent resistance to hydrolysis and good flexibility at low temperature, resistance to microbiological attack, good wear performance, high tensile strength, good damping behavior.

Ultrafuse TPU 85A White, 1.75mm, 750g

Ultrafuse 316L combines greater freedom of design with a low total cost of ownership. 3D-printed parts acquire their final properties, for example in terms of hardness and strength, through a debinding and sintering process developed…

Ultrafuse 316L Metal Filament | 2.85mm | 3kg

Ultrafuse ASA is a high-performance thermoplastic with similar mechanical properties as ABS.

Ultrafuse ASA Natural, 1.75mm, 750g

Natural White ABS Fusion+ (Acrylonitrile Styrene Acrylate) 0.75kg. 1.75mm diameter and approximately 90m long

ABS Fusion+ made with Polyscope XILOYTM 3D is an engineering filament which has been optimized for…

Ultrafuse ABS Fusion+ Natural White, 1.75mm, 750g

Black ABS 0.75kg. 1.75mm diameter and approximately 90m long

ABS (Acrylonitrile Butadiene Styrene) the second most used 3D printing material. Ultrafuse ABS is strong, flexible with a high-temperature resistance. Due to the process stability…

Ultrafuse ABS Black, 1.75mm, 750g

Polyethene Terephthalate is the most common thermoplastic polymer resin of the polyester family.

Ultrafuse InnoPET Gold, 2.85mm, 750g

Innoflex: flexible, rubberlike elastomer material with different levels of stiffness.
A material with a reduced carbon footprint and improved elastic performance.

Ultrafuse Innoflex 45 Pink, 2.85mm, 500g

Ultrafuse PET CF is a Carbon Fibre reinforced PET made with LUVOVOM® 3F.

Ultrafuse PET CF Black, 2.85mm, 750g

PAHT CF15 is a high-performance 3D printing filament that opens new application fields in FFF printing. In parallel to its advanced mechanical properties, dimensional stability and chemical resistance, it has very good processability.

Ultrafuse PAHT CF15 Black, 1.75mm, 750g

Ultrafuse polymer chemists have developed PRO1 as a high-speed engineering thermoplastic that prints as easy as PLA at speeds previously…

Ultrafuse PRO1 Natural White, 1.75mm, 2500g1202000018

Ultrafuse HIPS is a high-quality engineering thermoplastic.

Ultrafuse Hips Natural, 2.85mm, 750g

EPR InnoPET is made from a premium, food approved PET (Polyethylene terephtalate).

PET is widely used to produce food and beverage containers and bottles.

Ultrafuse EPR InnoPET Orange, 1.75mm, 750g

PLA is Poly-Lactic-Acid, a biodegradable polymer with a low melting point. It is an easy material to print with and Ultrafuse PLA gives a smooth printing result. This most used 3D printing material is available…

Ultrafuse PLA Army Green, 1.75mm, 750g

Ultrafuse BVOH, an ideal water-soluble support material for your 3D print.

Ultrafuse BVOH Natural, 1.75mm, 350g

Ultrafuse PP GF30 Natural, 1.75mm, 750g

With Ultrafuse® 17-4 PH we offer an efficient way to produce metal parts with high mechanical strength. Ultrafuse® 17-4 PH is compatible with most FFF 3D printers, giving our customers…

Ultrafuse 17-4 PH  |  1.75mm  |  3kg

With Ultrafuse® 17-4 PH we offer an efficient way to produce metal parts with high mechanical strength. Ultrafuse® 17-4 PH is compatible with most FFF 3D printers, giving our customers a high degree of…

Ultrafuse 17-4 PH | 2.85mm | 3kg |  Debinding & Sintering Bundle

Ultrafuse 316L Metal Filament | 1.75mm | 3kg | Debinding & Sintering Bundle

trafuse® TPU 64D combines the best of two worlds by being a strong yet flexible filament for Fused Filament Fabrication, suitable for all FFF technologies. Building on BASF‘s decades of experience in flexible materials, this material is based on the established thermoplastic polyurethane Elastollan, standing for maximum reliability, consistent product quality and cost efficiency. Ultrafuse® TPU 64D is easily compatible with water soluble support. Thanks to its property profile, Ultrafuse® TPU 64D presents an excellent alternative to rubber and ABS for the manufacturing of tools, jigs and fixtures.

Ultrafuse® TPU 64D is easy to print on direct drive and bowden style printers and is compatible with soluble BVOH support to realize the most complex geometries.

Ultrafuse® TPU 64D is based on food-safe raw materials (granulate), which are suitable for food contact applications according to the European Plastics Regulation.

Ultrafuse TPU 64D White - 1.75mm - 750g

PET is mainly known by the well-known PET bottle material. This recycled has a natural transparent blueish look. It has excellent 3D printing properties and good mechanical characteristics.

Ultrafuse RPET Natural Blue - 1.75mm - 750g

Ultrafuse® PPSU was specially developed for FFF printing based on BASF´s advanced Ultrason® materials. The Ultrason® resins are amorphous thermoplastics derived from polyethersulfone (PESU), polysulfone (PSU) and polyphenylsulfone (PPSU) and ensure very high thermal resistance.
With its wide spectrum of material performance advantages, Ultrafuse® PPSU can be successfully used in applications
where other plastics, e.g. polyamide, polycarbonate, polyoxymethylene and polyalkylene terephthalates, fail to meet
the performance specifications.

Ultrafuse Ppsu -1.75mm - 750g

Ultrafuse® PA6 GF30 is a unique compound specifically developed for FFF printing. Due to the glass fiber content of 30%, parts tend to warp less. In addition the excellent layer adhesion and its compatibility with the water soluble support Ultrafuse® BVOH make this material the perfect solution to develop industrial applications on an FFF printer.

With its high wear and chemical resistance, high stiffness and strength, Ultrafuse® PA6 GF30 is perfect for a wide variety of applications in automotive, electronics or transportation.

Ultrafuse PA6 GF30 is designed for functional prototyping and demanding applications such as industrial tooling, transportation, electronics, small appliances, sports & leisure

Ultrafuse PA6 GF30 - 1.75mm - 2200g

This stainless steel can be fully heat treated to high levels of strength and hardness. It is therefore ideal for Petrochemistry, Aerospace, the Automotive and the Medical Industry. Parts printed with our metal-polymer composite filament Ultrafuse® 17-4 PH obtain their final properties through a catalytic debinding and sintering process known from traditional Metal Injection Molding.

Ultrafuse 17-4 PH Metal Filament - 2.85mm - 1kg

Ultrafuse® PC GF30 is a unique compound of PC with 30% glass fibers, specially designed for FFF printing. With its high heat deflection temperature and good dimensional stability, Ultrafuse® PC GF30 is the right material to use in an industrial environment where good temperature resistance and high strength is needed.

Its UL94 V0 rating makes PC GF30 the perfect solution for applications in transportation industry that require flame retardancy. The resistance to UV light exposure and its low moisture uptake makes Ultrafuse® PC GF30 highly suitable for interior and exterior applications.

Ultrafuse PC GF30 - 2.85mm - 2200g

Ultrafuse® Support Layer filament developed to be used in combination with Ultrafuse® Metal Filaments. When printed between support and the object, it creates a barrier during sintering and facilitates the separation of support from the metal part. Ultrafuse® Support Layer is not developed to print stand-alone parts and should be printed as a layer attached to the support structures in dual extrusion prints.

Our Official BASF Product Range

We suggest upgrading to Chrome