CheckoutPage-BeforeYouGo

show

Discount-PromoLabel

hide

FamilyPage-Attribute-Selector

VariantThreeDropDown

Header-MainMenu

InfoPage-DiscountCodes

experiment_2

MyaccountPage_Recommendations

New_Login_Registration_Toggle

Notification

Show

Personalised-BoostType

default

ProductPage_Bundle

three_products

ProductPage-Attribute-Selector

ProductPage-Pills-Visibility

Expanded

Quick_View

control

Recommendations

Recommendations_Limits

LIMIT_20

Recommendations_withStrategies

test

Search-Engine

Elastic

search-templates

defaultTemplate

SearchPage_Top_Category

Default

SearchPage-BoostType

boost_img_lt_atb

SearchPage-Enable-Sort-Attribute-Value

AttributeValueSortOnSearchAndCategory

SearchPage-LeadTimeFilter

TopProducts-AddToBasket

Vertical-Recommendations_Toggle

Brand

Rating

Price

Special Offers

Length

Type

Overall Length

Product Type

Type of Cut

For general work on iron and steel slightly tapered in width and thickness.  Double cut on both sides, and single cut on both edges.

For filing circular openings or concave surfaces. Slightly tapered towards point.  Smooth Cut: approx. 62 teeth per 25mm (Fine).Second Cut: approx. 36 teeth per 25mm (Medium).Bastard Cut: approx. 26 teeth per 25mm (Coarse).

Parallel in width but slightly tapered in thickness. Double cut on both sides but on one edge only. Safe edge permits work in corners.  Smooth Cut: approx. 62 teeth per 25mm (Fine).Second Cut: approx. 36 teeth per 25mm (Medium).Bastard Cut: approx. 26 teeth per 25mm (Coarse).

Cross section allows use on convex and concave surfaces. Tapered very slightly towards point both in width and thickness.  Smooth Cut: approx. 62 teeth per 25mm (Fine).Second Cut: approx. 36 teeth per 25mm (Medium).Bastard Cut: approx. 26 teeth per 25mm (Coarse).

Cross Section allows use on Convex and Concave surfaces.Tapered very slightly towards point both in width and thickness.

Parallel in width but slightly tapered in thickness. Double cut on both sides but on one edge only. Safe edges permits work in corners.

For filing circular openings or concave surfaces, slightly tapered towards point.

For filing slots, keyways and surface filing. Slightly tapered towards point. Double cut teeth.  Bastard Cut: approx. 26 teeth per 25mm (Coarse).

For filing slots, keyways and surface filing. Slightly tapered towards point.Double cut teeth.

For filing all types of handsaws with 60° angle teeth.Straight set edges for filing gullets between saw teeth.

A rectangular shaped, tanged horse rasp, single cut on both edges with fine rasp teeth on one face and the special Magicut file teeth on the other.Cuts much faster than conventional horse rasps.Length is approximately 350mm (14in).  
Tanged.

Horse Rasp Magicut 350mm (14in)

For general work on iron and steel slightly tapered in width and thickness. Double cut on both sides, and single cut on both edges. Size 250mm (10in) Cut flat second Tanged.

Flat Second Cut File 250mm (10in) NICFSC10

For filing circular openings or concave surfaces. Slightly tapered towards point. Smooth Cut approx. 62 teeth per 25mm (Fine). Second Cut approx. 36 teeth per 25mm (Medium). Bastard Cut approx. 26 teeth per 25mm (Coarse). Size 300mm (12in) Cut round bastard Single Cut Tanged.

Round Bastard Cut File 300mm (12in) NICRB12

A rectangular shaped rasp, single cut on the edges with rasp teeth on one side and file teeth on the other. Ideal for hot rasping. Length excluding the tang is approximately 350mm (14in).

Horse Rasp Tanged Half File 350mm (14in) NICTHR14

This Nicholson® 10-inch Half Round Second Cut Cabinet Rasp is for use on concave, convex and flat surfaces. The curved side of the rasp has a larger radius than half round rasps and has the single cut on the edges for applying a smooth finish.The tanged design integrates with any Nicholson® adjustable handle, used by cabinet makers and woodworkers.Specifications:  Length: 10 inches.Material: Steel.

Half-Round Second Cut Cabinet Rasp 250mm (10in)

The Crescent Nicholson Three-Square Smooth Cut File is for filing internal acute angles and cleaning out square corners. Double cutting teeth with sharp edges. Smooth Cut approx. 62 teeth per 25mm (Fine)

Three-Square Smooth Cut File 150mm (6in) NICTSSM6N

This Nicholson® Red Wallet Needle Mini File Set 6 Piece 42030 assorted set contains one each of equalling, half round, flat, round, three square and square files. They have double-cut teeth for rapid removal of material.These 5 1/2-inch Swiss pattern files include a pouch for storage and organization, ideal for handicrafts and hobbies.  Specifications:  Quantity: 6 Piece.Length: 140mm.Material: Steel.

Red Wallet Needle Mini File Set 6 Piece 42030

Plain Horse Rasps are double ended with rasp teeth on one side and file teeth on the other.The edges are single cut.Overall length: 350mm (14in).

Horse Rasp Plain Regular Half File 350MM (14IN)

Half-Round rasp for use on wood or soft materials. Coarse bastard teeth with single cut edges. Length 300mm (12in) Tanged

Half-Round Bastard Wood Rasp 300mm (12in) NICWR12

Size 150mm (6in)  
Cut hand bastard  
Tanged
Note: Image is for illustrative purposes only and may differ from the actual product

Hand Bastard Cut File 150MM (6IN)

Cross section allows use on convex and concave surfaces. Tapered very slightly towards point both in width and thickness. Smooth Cut approx. 62 teeth per 25mm (Fine). Second Cut approx. 36 teeth per 25mm (Medium). Bastard Cut approx. 26 teeth per 25mm (Coarse). Size. 100mm (4in) Cut half round bastard Flat Side Double Cut Half-Round Double Cut. Tanged

Half-Round Bastard Cut File 100mm (4in) NICHRB4

Cross Section allows use on Convex and Concave surfaces. Tapered very slightly towards point both in width and thickness. Size 100mm (4in) Cut half round second Flatside Double Cut Half-Round Single Cut Tanged

Half-Round Second Cut File 100mm (4in) NICHRSC4

Cross Section allows use on Convex and Concave surfaces. Tapered very slightly towards point both in width and thickness. Size 150mm (6in) Cut half round smooth Flat Side Double Cut Half-Round Single Cut Tanged

Half-Round Smooth Cut File 150mm (6in) NICHRSM6

Parallel in width but slightly tapered in thickness. Double cut on both sides but on one edge only. Safe edges permits work in corners. Size 200mm (8in) Cut hand second Tanged

Hand Second Cut File 200mm (8in) NICHSC8

For filing circular openings or concave surfaces, slightly tapered towards point. Size 300mm (12in) Cut round second Single Cut Tanged.

Round Second Cut File 300mm (12in) NICRSC12

For filing slots, keyways and surface filing. Slightly tapered towards point. Double cut teeth. Bastard Cut approx. 26 teeth per 25mm (Coarse). Size 200mm (8in) Cut square bastard Tanged.

Square Bastard Cut File 200mm (8in) NICSB8

For filing slots, keyways and surface filing.  Slightly tapered towards point.Double cut teeth. Size   100mm (4in) Cut square smooth  Tanged.

Square Smooth Cut File 100mm (4in)

For filing all types of handsaws with 60 angle teeth. Straight set edges for filing gullets between saw teeth. Single Cut. Size 200mm (8in) Side 19/32in Tanged.

Taper Saw File 200mm (8in) NICTR8

Crescent Nicholson Warding Smooth Cut File for locksmithing work in wards or notches of keys and for reaching into narrow places. Double cut on sides, single cut on edges. 1 x Crescent Nicholson Warding Smooth Cut File 150mm (6in)

Our Official Crescent Nicholson Product Range