Brand

Rating

Price

Special Offers

Product Type

Benefits:
Fully Swiss machines copper tungsten guide
Handles amperage of 80A to 100A DC for short periods

Instructions
1. Install with cupped screen facing inside cup and push flat side into cup evenly. May take a few tries to get the screen even
2. Ensure there is even gap between the screens and the screen facing the end is tight against the wall of the glass.

Benefits:
Improved visibility
Reduced eye fatigue
Increased productivity
Pack of 2

Improve your welding visibility and productivity with Furick BBW Diffusers. These high-quality diffusers are made of stainless steel and are designed to fit most TIG welding torches. They help to reduce the glare and heat from the welding arc, making it easier to see your work and get a better weld. BBW Diffusers also help to improve productivity by reducing eye fatigue.

Features

Help to reduce the glare and heat from the welding arc, making it easier to see your work.
Help to reduce eye fatigue, so you can weld for longer periods of time without discomfort.
Help to improve productivity by reducing eye fatigue and making it easier to see your work.
Made of stainless steel
Fits most TIG welding torches

Instructions

1. Push the ring out of the BBW cup with soft object and insert the new diffuser in the slot where the old one was.
2. If the o’ring is ok then leave it in if not change the o’ring.
3. Moisten the inside of the cup and push the ring/diffuser assembly back in to desired position.

Instructions
1. Install the empty Glass or Ceramic Cup on your torch with a 3/32 tungsten installed
2. Install the screen over the Tungsten with the Cupped side first
3. Slide on plastic tool and evenly apply pressure to the Side flange of tool. With a little pressure the screen should seat in the cup perfectly. The screen should look like an hour glass when installed with the screens sealing against the sidewalls of the glass/ceramic as shown in the picture.

Please note. You may have to cup the screen with your fingers more if it snags on the ceramic.

The Jazzy Screen Install Tool helps install diffuser screens.

Insert the cupped side of the screen into the tool and push it into the cup until it is seated. Cup the screen more if the cup is sticky.

This kit includes screen diffusers and an install tool to help you insert them properly.

The 1/8th diffusers will increase your amperage range to over 250 amps.

Please note. Inserting the screens can be a bit tricky, but the tool helps keep the screens centered in the cup.

Make sure to install the cupped side first and push gently with the tool. You may need to cup the screens more with your fingers if the ceramic cups are sticky.

Benefits:
Fully Swiss machines copper tungsten guide
Handles amperage of 80A to 100A DC for short periods

Instructions
1. Install with cupped screen facing inside cup and push flat side into cup evenly. May take a few tries to get the screen even
2. Ensure there is even gap between the screens and the screen facing the end is tight against the wall of the glass.

Fupa 12 Diffuser 2.4mm

Jazzy 10 Diffuser Screens 2.4mm

Fupa Gas Lens for 17 Torch 3.2mm

Benefits:
Improved visibility
Reduced eye fatigue
Increased productivity
Pack of 2

Improve your welding visibility and productivity with Furick BBW Diffusers. These high-quality diffusers are made of stainless steel and are designed to fit most TIG welding torches. They help to reduce the glare and heat from the welding arc, making it easier to see your work and get a better weld. BBW Diffusers also help to improve productivity by reducing eye fatigue.

Features

Help to reduce the glare and heat from the welding arc, making it easier to see your work.
Help to reduce eye fatigue, so you can weld for longer periods of time without discomfort.
Help to improve productivity by reducing eye fatigue and making it easier to see your work.
Made of stainless steel
Fits most TIG welding torches

Instructions

1. Push the ring out of the BBW cup with soft object and insert the new diffuser in the slot where the old one was.
2. If the o’ring is ok then leave it in if not change the o’ring.
3. Moisten the inside of the cup and push the ring/diffuser assembly back in to desired position.

BBW Diffusers (2pk) 2.4mm

Improve your welding visibility and productivity with Furick BBW Diffusers. These high-quality diffusers are made of stainless steel and are designed to fit most TIG welding torches. They help to reduce the glare and heat from the welding arc, making it easier to see your work and get a better weld. BBW Diffusers also help to improve productivity by reducing eye fatigue.

Features
Full ceramic construction for durability and long life
Threads on 45V44 gas lens for 9 or 20 torches
Recommended for DC only and 3/32 tungsten
Best results with 30 CFH of argon flow

Instructions
Keep tungsten clean at all times
Start arc at a low amperage
Establish Arc on tip of tungsten then roll into the desired amperage. If arc wanders, clean tungsten or damage to the Screen Diffuser is possible.
Keep screen in the shape it comes with and try not to deform the screen. If screen replacement is needed make sure Screen is sealed against the walls of the cup or undesired results may occur.

BBW Ceramic Kit BBWKOKN

Furick FUPA insulator for CK 17, 18 and 26 torch

Please note. May arrive in black

Fupa Insulator for CK Torch 17/18/26

Furick FUPA insulator for non-CK 17, 18 and 26 torch

Features
Keep your welding torches in good condition with this heat-resistant Teflon insulator.
It fits most 17, 18, and 26 series torches, but not CK torches.
This insulator is a must-have for any welder who wants to protect their torches from heat damage.

Fupa Insulator for Non-CK Torches 17/18/26

Furick BBW Replacement Pyrex Glass for BBWSG-19 brass inset cup.

Instructions
1. Use provided o ring and install on the brass BBWSG-19 Diffuser housing
2. Moisten the inside of the Glass cup and around the oring and gently push in
3. Be careful and do not force the Brass housing. If difficult, use more moisture.

BBW Replacement Pyrex Glass BBWSGG

Instructions
1. Install the empty Glass or Ceramic Cup on your torch with a 3/32 tungsten installed
2. Install the screen over the Tungsten with the Cupped side first
3. Slide on plastic tool and evenly apply pressure to the Side flange of tool. With a little pressure the screen should seat in the cup perfectly. The screen should look like an hour glass when installed with the screens sealing against the sidewalls of the glass/ceramic as shown in the picture.

Please note. You may have to cup the screen with your fingers more if it snags on the ceramic.

Fupa 12 Diffuser & Install Kit 1.6mm

The JAZZY 10 ceramic kit includes two ceramic cups and one spare screen diffuser. It is compatible with 9/20 torches or the 17, 18, and 26 adapter kit. The kit is designed for mild steel welding and walking welds. It can handle up to 175 amps DC with 3/32. It is not recommended for AC welding.

Jazzy 10 Ceramic Kit J10KOKN

What's In The Box

2 diffusers
1 install tool

Mooseknuckle 14 1.6mm Diffuser & Install Kit ITM116K

Benefits:
US made
New and improved design includes a threaded brass chassis and improved gas delivery
Performs best at 30 - 40 CFH
Utilises same diffuser as original

This high-quality Pyrex cup kit is perfect for welding and brazing applications. The cups are made of heat-resistant borosilicate glass, which can withstand temperatures up to 1, 475 degrees Fahrenheit. They are also resistant to chemicals and scratches, making them durable and long-lasting.

What's In The Box
BBW screw-on Pyrex cup
Diffuser
O-ring

Please note. Do not overtighten the glass. Screw the cup on until you feel minimum tension. The brass will not bottom out on torch. DC only. Max 180A.

BBW Pyrex Cup Kit without Titanium Cover

BBW Titanium Cover BBWSGC

Benefits:

Weld thicker and thinner materials with ease
Enjoy a long service life from your welding rig
Keep your welding rig running smoothly with the spare diffuser

This kit includes a ceramic and a glass cup, giving you the flexibility to choose the right one for the job. The ceramic cup is ideal for welding thicker materials, while the glass cup is better suited for welding thinner materials. Both cups are made from high-quality materials and are designed to provide a long service life.

The kit also includes a spare diffuser, so you can keep your welding rig running smoothly.

The cups will mount on a 45V44 gas lens or a 17 kit Please see the Identify page to determine your torch size.

Features

Ceramic and glass cups for versatility
High-quality materials for durability
Long service life
Spare diffuser included

Please note. The diffusers in the cups are designed to work only with the Furick cup brand cups. We also recommend you buy a few spare diffusers to have, they are somewhat consumables and will eventually need to be replaced.

The diffusers must be installed like you received them installed and must seal tightly around the cup or you will have poor results.

They are designed to have a gap between the 2 layers of screens and it is recommended you install them back that way. It may take a few tries to get the screens in properly but have patience. The cupped side goes in first .

Fupa 12 Ceramic and Glass Kit with Cover

Furick Fupa + MK 14 Screen Install Tool - 1/16"/1.6mm ITFM116

Fupa & MK 14 Screen Install Tool 1/16" ITFM116

Pack of 10 genuine spare high-temperature silicone O rings for Furick FUPA, BBW and Mooseknuckle glass cups.

Fupa, BBW & Mooseknuckle Spare O-Rings (10pk) OR12

The Fupa/MK14 screen insertion tool is a simple solution to the problem of inserting screens with your fingers. The tool is made of precision machined PVC plastic and makes it easy to insert screens into Fupa/MK14 glass and ceramic cups.

Instructions
1. Install the empty glass or ceramic cup on your torch with a 3/32 tungsten installed
2. Install the screen over the tungsten with the cupped side first
3. Slide on plastic tool and evenly apply pressure to the side flange of tool. With a little pressure, the screen should seat in the cup perfectly. You want the screen to look like an hour glass when installed with the screens sealing against the sidewalls of the glass/ceramic as shown in the attached photograph.

Please note. You may have to cup the screen with your fingers more if it snags on the ceramic.

Fupa & MK14 12 Diffuser Install Tool ITFM332

Fupa 12 Ceramic and Glass Kit without Cover

The JAZZY 10 ceramic kit includes two glass cups, 4 o-rings and one spare screen diffuser.

When welding mild steel with a Jazzy 10 Pyrex cup, you can use less gas (20-25 CFH) and still get great results. This is because the cup is designed to focus the gas more effectively, resulting in a more consistent and stable weld. The cup is also made of Pyrex, which is a heat-resistant material that can withstand the high temperatures of TIG welding. The Jazzy 10 cup is compatible with DC polarity and has an amperage rating of 175, making it ideal for a variety of mild steel welding applications.

Jazzy 10 2.4mm Pyrex Glass Kit J10K

The Furick Mooseknuckle 14 diffuser features a fully Swiss machined copper tungsten guide that can handle an amperage of 80 amps and up to 100 amps DC for short periods. This makes it a durable and reliable option for a variety of welding applications.

Mooseknuckle 14 Diffuser 1.6mm (2pk) MK14D116

BBW Pyrex Cup Kit with Titanium Cover

The Jazzy Screen Install Tool helps install diffuser screens.

Insert the cupped side of the screen into the tool and push it into the cup until it is seated. Cup the screen more if the cup is sticky.

Jazzy 10 Screen Install Tool 2.4mm

This kit includes screen diffusers and an install tool to help you insert them properly.

The 1/8th diffusers will increase your amperage range to over 250 amps.

Please note. Inserting the screens can be a bit tricky, but the tool helps keep the screens centered in the cup.

Make sure to install the cupped side first and push gently with the tool. You may need to cup the screens more with your fingers if the ceramic cups are sticky.

Jazzy 10 Diffuser & Install Kit 3.2mm

The diffuser is a hand-made, borosilicate glass cup with an inside diameter of 0.875 inches (22mm) It is recommended for DC polarity applications only and uses 25-30+ CFH of argon flow. It is rated for 180 amps on constant amperage, but can go higher with pulse settings. The diffuser is not recommended for "walking the cup" due to the nature of the glass.

The Moose Knuckle 14 diffuser is recommended for welding mild steel, stainless steel, chromoly, titanium, inconel, and other space grade alloys. It works best on thinner and smaller to medium applications, such as header tubes, chassis tubing, and flat welding applications.

Note. For #17, #18 or #26 size torch you will need a #17 kit. For #9 or #20 torch you will need to have a 45V44 gas lens. Keep in mind that import brands yield lower results.

What's In The Box

One full cup
One spare diffuser
Mounting o-rings

Mooseknuckle 14 Cup Single MK14G

The Furick Fupa Starter Kit is the perfect way to get started with TIG welding.

Please note. For CK torches you will need an additional insulator (part no. 17ICK) or you can slightly modify the insulator that comes with kit. Modifying requires a slight sanding to the inner lip of insulator to snap over the CK brass lip.

What's In The Box
Gas lens 11617GL 1/16 ,33217GL 3/32 ,12517GL 1/8 (Genuine FURICK) 
Wedge collets 1 of each size 1/16, 3/32 and 1/8 (Genuine FURICK) 
Stubby Collet bodies 1/16, 3/32 and 1/8
Furick torch insulator
JAZZY10 Ceramic (DC Only) 
Fupa 12 Ceramic (DC Only) 
Fupa 12 Glass (DC only) 
MK14 Ceramic (DC Only) 
BBWSG19 Ceramic (DC Only) 
BBWSG19 Glass (DC Only) 
2- #8 ceramic Gas lens mount cups (AC and DC) 
1- #8 Pro Glass (AC and DC 180 amps) 
2 #5 Ceramic collet body mount cups
10 pack o rings
Jazzy 10 and Fupa 12 install tool with 1 spare diffuser of Jazzy and Fupa 12
Back cap assortment small, medium and large

Our Official Furick Cup Product Range

We suggest upgrading to Chrome