CheckoutPage-BeforeYouGo

show

Discount-PromoLabel

hide

FamilyPage-Attribute-Selector

VariantThreeDropDown

Header-MainMenu

InfoPage-DiscountCodes

experiment_1

MyaccountPage_Recommendations

New_Login_Registration_Toggle

Notification

Show

Personalised-BoostType

default

ProductPage_Bundle

three_products

ProductPage-Attribute-Selector

ProductPage-Pills-Visibility

Expanded

Quick_View

control

Recommendations

Recommendations_Limits

LIMIT_20

Recommendations_withStrategies

Search-Engine

Elastic

search-templates

defaultTemplate

SearchPage_Top_Category

Default

SearchPage-BoostType

boost_img_lt_atb

SearchPage-Enable-Sort-Attribute-Value

AttributeValueSortOnSearchAndCategory

SearchPage-LeadTimeFilter

TopProducts-AddToBasket

Vertical-Recommendations_Toggle

LeadTime

Brand

Rating

Price

Special Offers

Air Consumption

Air Inlet Size

No Load Speed

Length

Horsepower

Overall Length

Power

Collet Size

Maximum No Load Speed

Overall Width

B3144
Short body length allowing access into hard to reach areas. Planetary gears for longer life and smoother running. Low profile teasing throttle for precise speed control. Rotating air inlet to prevent the air hose tangling.
Collet size: 1/4" (6mm), 1/8" (3mm). 
Free speed: 20,000rpm.
Air pressure: 6.2bar (90psi). 
Air consumption: 4cfm* (113ltr/min).
Air inlet thread: 1/4" NPT. 
Minimum air hose size (ID): 10mm (3/8").
Overall length: 165mm.
Noise Level: 90dBA
Sound Power: 97dBA
Vibration: 1.24m/s

*Based on a 15 second cycle per minute average use.

B3144 - Professional 90 Angle Air Die Grinder, 20, 000RPM

SBD370
Light enough to be semi-portable, yet its robust construction makes it ideal for workshop use. It has a disc sanding table suitable for finish sanding and curve sanding. The disc table also tilts to 45 degrees for bevel sanding and when used with the mitring guide is ideal for sanding compound angles. The sanding belt is ideal flat surface sanding but tilts up to 90 degrees for end sanding. Can be directly connected to dust extraction (highly recommended) by way of the 61mm outlet port on the end of the sander.
Power input: 370W.
Sanding Disc: 150mm PSA (Stikit)
Sanding Belt: 100 x 914mm (4" x 36")
Weight: 17kg

Belt & Disc Sander 370W

B3555  
Use for grinding, polishing, buffing and deburring. The extra length allows you to reach more confined areas. Reversible hardened steel 1/4" collet. Planetary gears for longer life and smoother running. Low profile teasing throttle for precise speed control. Rotating air inlet to prevent the air hose tangling.

Specifications:
Model number: B3555
Collet size: 1/4" (6mm), 1/8" (3mm). 
Free speed: 25,000rpm. 
Recommended air pressure: 6.2Bar (90PSI). 
Air consumption: 4CFM* (113ltr/min). 
Air inlet thread: 1/4" NPT. 
Minimum air hose size (ID): 10mm (3/8"). 
Noise level: 91dBA. 
Sound power level: 98dBA.
Vibration level#: 4.53m/s2.
Overall length: 260mm.
Net weight: 0.68kg.
?Per Pneurop Standard Per EN 12366.
#Per EN 28927-1.

*Based on a 15 second cycle per minute average use.

B3555 - Professional Extended High Speed Inline Die Grinder, 25, 000RPM

IWS100X
1" square drive. Suitable for industrial and commercial production and assembly applications. Side handle for two-handed operation. Top mounted spring balance loop. Easy to use forward/reverse switch and three position power regulator. Top venting exhaust. Oiling points for daily maintenance. 
Free speed: 3,300rpm.
Final drive: 1" (25mm) hex.
Working torque: 2,030Nm (1500lb/ft).
Maximum torque: 2,300Nm (1700lb/ft).
Safe working pressure: 6.2bar/90psi.
Air inlet thread: 1/2" NPT. 
Minimum air hose size (ID): 1/2" (13mm). 
Air pressure: 6.3bar/90psi. 
Air consumption: 7.0cfm.
Sound pressure level: 87dBA. 
Vibration level: 5.9m/s2.
Overall length: 500mm.

1" Drive Heavy Duty In-line Impact Wrench

B3456
Use for grinding, polishing, buffing and deburring. Reversible hardened steel 1/4" collet. Short body length allowing access into hard to reach areas. Planetary gears for longer life and smoother running. Low profile teasing throttle for precise speed control. Rotating air inlet to prevent the air hose tangling.

Specifications:
Drive size: 1/4" (6mm), 1/8" (3mm).
Free speed: 25,000rpm.
Air pressure: 6.2Bar (90PSI).
Air consumption: 4CFM* (113ltr/min).
Air inlet thread: 1/4" NPT.
Minimum air hose size (ID): 10mm (3/8").
Noise level: 91dBA.
Sound power level: 98dBA.
Vibration level#: 4.53m/s2.
Overall length: 160mm.
Weight: 0.6kg.
? Per Pneurop Standards EN 12366.
# Per EN 28927-1.

*Based on a 15 second cycle per minute average use

B3456 - Professional Compact, High Speed Air Inline Die Grinder, 25, 000RPM

With a high speed of 15,000rpm and an adjustable power regulator to match the speed to the job, the random orbital sander provides a smooth, swirl-free finish whilst the ergonomic hand grip offers enhanced user comfort. The compact, lightweight design makes it easy to use in confined areas and the exhaust directs air away from the operator. The sander uses 75mm (3") backing pads and has a ball bearing construction for a long tool life.

Specifications:
Motor power: 0.40hp
Free speed: 15,00rpm. 
Air inlet thread: 1/4" BSP.
Backing pad: Hook & Loop. 
Backing pad size: 75mm (3").
Operating pressure: 90psi/6.2bar.
Minimum air hose size (ID): 3/8" (10mm).
Sound power level: 91dBA. 
Vibration level: 6.3m/s2.
Overall length: 125mm.

3" Composite Air Random Orbital Sander

B3244
Reversible hardened steel 1/4” collet. Short body length allowing access into hard to reach areas. Planetary gears for longer life and smoother running. Low profile teasing throttle for precise speed control. Rotating air inlet to prevent the air hose tangling.
Collet size: 1/4” (6mm), 1/8” (3mm). 
Free speed: 20,000rpm.
Recommended air pressure: 6.2bar (90psi).
Air consumption: 4cfm* (113ltr/min). 
Air inlet thread: 1/4” NPT.
Minimum air hose size (ID): 10mm (3/8”). 
Overall length: 200mm.
Noise Level: 90dBA
Sound Power: 97dBA
Vibration: 1.24m/s

*Based on a 15 second cycle per minute average use.

B3244 - 115 Professional Air Angle Die Grinder 25, 000RPM

MBS025-X
Suitable for shaping, paint removal, weld sanding, smoothing and rust removal on flat or curved surfaces. Supplied with 9 flexible abrasive belts and 5 contact arms. Rated for continuous use. Uses 6, 10, 13 and 20mm wide by 457mm long abrasive belts. Adjustable multi-positional sanding arm angle with a speed regulator and rear handle exhaust with noise baffler. 
Free speed: 18,000rpm. 
Air inlet thread: 1/4” NPT.
Minimum air hose size (ID): 10mm (3/8”). 
Air consumption: 4cfm* (113ltr/min).
Air pressure: 90psi/6.3bar.
Motor power: 0.6hp.
Noise Level: 84dBA
Sound Power; 92dBA	
Vibration: 0.8m/s
Overall length: 390mm. 

*Based on a 15 second cycle per minute average use.

Kit contents:
Contact arms: 6, 10, 13, 20mm with flat roller. 10mm with rounded roller. 
Surface preparation file belts: 20mm: P80 grit (coarse), 13mm: P300 grit (fine)
Aluminium oxide file belts: 20mm: P60, P80 grit, 13mm: P80, P120 grit, 10mm: P120, P150 grit, 6mm: P150 grit. 4mm hexagon key L-wrench.

XSB613K Belt Sander Kit

B7444
Suitable for production and assembly applications. Twin hammer mechanism. 1/2” square drive. Three position dial style speed regulator. Forward/reverse selection. Ergonomic and comfortable handle grip. Fixed inlet and exhaust.
Forward: position 1: 4000rpm, position 2: 5000rpm, position 3: 7000rpm.
Reverse: position 1: 3000rpm, position 2: 5000rpm, position 3: 7000rpm.
Collet size: 1/2” (13mm). 
Free speed: 7,000rpm.
Maximum torque: 813Nm (600ft/lbs).
Recommended air pressure: 6.2bar/90psi. 
Air consumption: 4cfm* (113ltr/min). 
Noise Level: 83dBA
Sound Power: 90dBA
Vibration: 6.8m/s2
Air inlet thread: 1/4” NPT. 
Minimum air hose size (ID): 10mm (3/8”). 
Overall length: 183mm.

*Based on a 15 second cycle per minute average use.

B7444 1/2" Impact Wrench Composite Housing

IWP100-X
Suitable for industrial and commercial production and assembly applications. Front or rear mounting spring balance loop. Forward/reverse switch and three position power regulator. Forward facing exhaust. Oiling points for daily maintenance.
Free speed: 3,400rpm. 
Final drive: 1” (25mm) hex.
Working torque: 2,170Nm (1600lb/ft).
Maximum torque: 2,440Nm (1800lb/ft).
Air inlet thread: 1/2” NPT. 
Minimum air hose size (ID): 1/2” (13mm). 
Air pressure: 6.3bar/90psi. 
Air consumption: 0.8cfm.
Sound pressure level: 87dBA. 
Vibration level: 5.9m/s2. 
Overall length: 295mm.

1" Drive Heavy Duty Pistol Grip Air Impact Wrench

CSP005S
Heavy-duty reverse action pistol grip screwdriver suitable for production and assembly applications. Push to start type with auto shut-off clutch for precision applications. 
Three interchangeable torque springs allow for easy conversion for new applications. 1/4” hex drive. External torque adjustment does not require disassembly of the tool. Variable speed throttle. Ergonomically contoured grip for operator comfort. 
Handle exhaust directs air away from the workpiece and operator. Hanging ring included.
Chuck size: 1/4” (6mm) hex.
Air inlet thread: 1/4” NPT.    
Minimum air hose size (ID): 3/8” (10mm).
Green torque spring:* 0.6 - 2.1Nm (5 - 19in/lbs).
Black torque spring: 1.1 - 4.3Nm (10 - 38in/lbs).
Yellow torque spring: 1.7 - 5.1Nm (15 - 45in/lbs).
Air pressure: 6.3bar/90psi.
Air consumption: 4cfm* (144ltr/min).
Noise Level: 84dBA
Sound Power: 93dBA
Vibration: <0.5m/s2

Sack Auto Shut-off Screwdriver Rev

B2842
Use for drilling and screwdriving. Two speed trigger (slow speed when pushed halfway). Directional lever accessible from both sides for left/right handed use. 13mm (1/2”) chuck and detachable side handle included. Planetary gears for longer life and smoother running. Ergonomic comfortable grip.
Chuck size: 1/2” (13mm). Free speed: 800rpm.
Recommended air pressure: 6.2bar (90psi).
Air consumption: 4cfm* (113ltr/min).
Air inlet thread: 1/4” NPT.
Spindle thread: 3/8” - 24.
Minimum air hose size (ID): 3/8” (10mm).
Noise level†: 86dBA. 
Sound power level†: 93dBA. 
Vibration level #: 0.4m/s2.
Overall length: 218mm.
†Per en iso 15744:2002.
#Per en 28927-5.

*Based on a 15 second cycle per minute average use.

B2842 1/2" Rev. Drill Industrial Keyed Chuck

Compact and lightweight for ease of use in confined spaces, the Kobe 10mm Composite Straight Drill has a high speed of 2,500rpm and an adjustable power regulator to match the speed of the job. User comfort is enhanced with an ergonomic hand grip and the exhaust outlet adjusts 360° to direct air flow away from the operator. This drill also has the advantage of a fast drill bit change with keyless chuck and a safety lever throttle.

10mm Composite Straight Drill Keyless Chuck

Our Official Kobe­ Blue_Line Product Range

Our Official Kobe Blue_Line Product Range