Brand

Rating

Price

Special Offers

Medium strength anaerobic adhesive for thread locking of nuts and bolts of all types that require to be dismantled. Suitable to be used on oily surfaces. Highly resistant to heat, corrosion, vibrations, water, gas, oils, hydrocarand many chemicals. Proven unscrewing resistance at +200°C. Approved as gas-tight sealant for threaded fittings according to the European norm EN 751-1 (DVGW nr. NG-5146AU0399 and GAZ DE FRANCE) .

Medium Strength Thread Lock  - 50 ml

Low strength anaerobic adhesive for thread locking of nuts, bolts and screws of all types that require to be easily desmantled. Highly resistant to heat, corrosion, vibrations, water, gases, oils, hydrocarand many chemicals.

Low Strength Thread Lock  - 50 ml

Anaerobic curing adhesive for the gasketing and sealing of flanges. It replaces solid gaskets and gives flexible cured films.

To seal against gases, water, LPG, hydrocarbons, oils and other chemicals.

Thixotropic property prevents migration of the sealant before or during curing.

Shocks and vibrations resistant; unaffected sealing properties in the temperature range from -55°C to +150°C.

Instant Gasket 58-14  - 75 ml

Medium strength anaerobic adhesive for retaining of bearings, liners, bushes, keys and splines.

Highly resistant to heat, corrosion, vibrations, water, gases, oils, hydrocarand many chemicals.

Bearing Retainer  - 50 ml

Anaerobic adhesive for sealing of metal thread pipe joints. Suitable for gas, LP gas, compressed air, gasoline and oil, industrial fluids, CFC, water and several chemicals. Low friction coefficient will assure easy assembly. Thixotropic property prevents migration from thread of the sealant before or during curing. It replaces PTFE tape and yarn. Cured product provides elastic film. Shocks and vibrations resistant; unaffected sealing properties in the temperature range from -55 to +150°C. Easy dismantling is assured even after years.
Approvals for natural gas and LP gas in vapour state.

Europe: approved to EN751-1 by DIN-DVGW NG 5146AR0574 from -20°C to +150° C up to 2” pipe size.
Australia: approved by AGA n.5047 up to 5 bar and 2” pipe size.

Thread Sealing  - L18-10x75ML - 75 ml

Fast curing high strength anaerobic adhesive for locking and sealing threads, and retaining of cylindrical parts. It allows larger machining tolerances. Highly resistant to heat, corrosion, vibrations, water, gases, oils, hydrocarand many chemicals.Approved for gas

Retainer - L85-21x50ML - 50 ml

Medium strength anaerobic adhesive for sealing hydraulic and pneumatic threads connectors up to 3/4” and small pipes. To replace PTFE tapes in the sealing of gases, water, LPG, hydrocarbons, oils and other chemicals. Approved for Gas according to European norm EN 751-1 (DIN-DVGW NG-5146AU0038) Highly resistant to heat, corrosion, shocks and vibrations.

Hydraulic Thread Seal  - 50 ml

Very high temperature (+ 230°C) resistant, high strength anaerobic adhesive for locking and sealing thread connections and fitted parts.

High viscosity and thixotropic effect allow larger tolerances.

Highly resistant to corrosion, vibrations, water, gases, oils, hydrocarand many chemicals.

DIN DVGW approved thread sealant for gas (according to DIN EN 751-1 Reg. Nr. NG – 5146BQ0496) .

High Teperature Thread Seal  - 50 ml

Fast curing high strength anaerobic adhesive for locking and sealing threads, and retaining of cylindrical components.

Highly resistant to heat, corrosion, vibrations, water, gases, oils, hydrocarbons and many chemicals. Approved as thread sealant with gaseous oxygen up to 20 bar at + 60°C (BAM Ref N° II.1/46 363) .

High Strength Retainer  - 50 ml

Anaerobic curing adhesive for sealing of metal thread joints only. Approved for Gas (DVGW, DIN-EN 751-1) , high pressure gas and GLP (Australian Gas Association – Approval No. 5048) for working pressure up to 20 Bars.

Approved for use with gaseous oxygen up to 10 Bars and +60°C (BAM Ref. N° II-717/2007 E) .
WRAS listed for contact with wholesome (potable) water, approval number 1310513.
Approved for contact with drinking water (GLOBAL MARK, GM-WM-040164-I01-R00) .
NSF registered in cat. P1 (n. 141234) as acceptable for use as a sealant in and around food processing area.
It replaces PTFE tape and yarn and gives instant sealing against moderate pressure.
It seals against gas, water, LPG, hydrocarbons, oils and other chemicals.
Thixotropic property prevents migration of sealant from thread before or during curing.
Shock and vibrations resistant, sealing properties unaffected over the temperature range from -55°C to +150°C.

Threadseal 58-11  - 75 ml

Highly resistant to heat, corrosion, vibrations, water, gases, oils, hydrocarbons and many chemicals. Approved as thread sealant with gaseous oxygen up to 20 bar at + 60°C (BAM Ref N° II.1/46 363) .

High Strength Thread Lock  - 50 ml

ProductPage-Title-Mobile

Below

Scheduled_Orders

show_with_global

ProductPage-Add-To-Quotation

show

SearchPage-LeadTimeFilter

ProductPage-Pills-Visibility

Expanded

InfoPage-DiscountCodes

experiment_1

ProductPage-Attribute-Selector

VariantThreeDropDown

SearchPage_Top_Category

Default

SearchPage-FilterPanel-Expanded

Show

Personalised-BoostType

default

Number-Of-Recommendations

eight

SearchPage-SearchResultLimit

Hundred

ProductPage-ViewAll-Terminal-Node

ProductPage_Bundle

three_products

FamilyPage-Attribute-Selector

StickyFilterPanel-InfiniteScroll

Hide

SingleLine-ProductHeader-Mobile

SHOW

Previously-Purchased-Tag

Discount-PromoLabel

hide

Sticky-MainMenu

New_Login_Registration_Toggle

ProductPage-AddToBasket-Mobile

ProductPage-Title-Length-Mobile

Vertical-Recommendations_Toggle

SearchPage-Enable-Sort-Attribute-Value

AttributeValueSortOnSearchAndCategory

Recommendations

test

MyaccountPage_Recommendations

SearchPage-BoostType

boost_img_lt_atb_gp

search-templates

defaultTemplate

Header-MainMenu

Payment-GooglePay

SearchPage-InfiniteScroll-Limit

Thousand

Our Official LOXEAL Product Range

We suggest upgrading to Chrome