CheckoutPage-BeforeYouGo

show

Discount-PromoLabel

hide

FamilyPage-Attribute-Selector

VariantThreeDropDown

Header-MainMenu

InfoPage-DiscountCodes

experiment_1

MyaccountPage_Recommendations

New_Login_Registration_Toggle

Notification

Show

Personalised-BoostType

default

ProductPage_Bundle

three_products

ProductPage-Attribute-Selector

ProductPage-Pills-Visibility

Expanded

Quick_View

control

Recommendations

test

Recommendations_Limits

LIMIT_20

Recommendations_withStrategies

Search-Engine

Elastic

search-templates

defaultTemplate

SearchPage_Top_Category

Default

SearchPage-BoostType

boost_img_lt_atb

SearchPage-Enable-Sort-Attribute-Value

AttributeValueSortOnSearchAndCategory

SearchPage-LeadTimeFilter

TopProducts-AddToBasket

Vertical-Recommendations_Toggle

Brand

Rating

Price

Special Offers

Product Type

Type

Material

Thickness

Size

Outside Diameter

Inside Diameter

Stud Size

Diameter

Height

TICO S/PA anti vibration material is a high performance machinery mounting pad. It matches today's fast changing manufacturing environment, where ease of machine mounting and flexibility of plant layout are prime factors.

Key Features:

• Reduces noise and vibration
• Maximum recommended load bearing capacity of 0.5 MN/m2 (approx. 50 tonnes per square metre)
• Resistant to a wide range of fluid media
• Operating temperature range of -40˚C to 100˚C.
• Can be adhered to floor - No bolting required.
• Easy to cut and simple to install.

Suitable for the majority of applications where ease of installation and flexibility of plant layout are prime factors on installations. This pad is compatible with all types of machine base. 

S/PA is a tough and resilient bonded cellular material. It is made from a blend of selected cork particles and polychloroprene /acrylonitrile elastomers. It is resistant to water, most oils, spirits and cutting fluids. The anti vibration pad material has a high co-efficient of friction and does not need a textured surface for efficient operation. 

The material is usually fixed to the floor and the machine with TICO Contact Adhesive S, but machines with a high centre of gravity (for example) may be bolted using nuts and studs. In this instance TICO Washers and Collars must be employed to stop transfer of vibration through bolts.

TICO S/CO Bolt Isolation Collars are used to prevent transmission of machine noise and vibration through the bolt to the surrounding area.
Key Features:

• Isolate bolts from a machine base.
• Minimum wall thickness of 3mm.

A bolt provides a direct transmission path for vibration from the machine to the floor, effectively short-circuiting the TICO pad. To prevent this, it is essential that the bolts are isolated from the machine base. This is achieved using TICO Bolt Isolation Collars.

Although the vast majority of machinery plant can be secured by TICO Pads and Adhesive, cases where bolts might be employed are where the centre of gravity falls outside the machine base as with an inclinable power press, radial drill, or where the centre of gravity is high.

In these applications, TICO Bolt Isolation S/CO Collars should also be used to prevent transmission of machine noise and vibration through the bolt to the surrounding area. It is recommended that the nuts not be over tightened so as to firmly locate the machine without applying further compression to the TICO Pads.

TICO S/SH Shimming is commonly used in conjunction with other TICO pads (e.g. TICO S/PA), to provide a quick and efficient way of leveling plant without compromising the vibration isolating properties of the main pads.

Key Features:

• Accurate and rapid height adjustment and leveling
• Low profile for minimum additional height.
• Simple installation and easily cut to size.

TICO S/SH is normally used for relatively small variations in level, because of its thickness. This leveling sheet is formed from rubber bonded cork. TICO S/SH can also be used to provide a conformable interface between two members with a minimal impact on height.

TICO Adjustamounts - are specially designed for mounting machines and structures where accurate levelling is of prime importance, and where slight additional height is required. 

They have been found especially suitable for certain tool room machinery such as long 
bed lathes, precision grinders as well as for conveyors and light structures mounted on varying floor levels. 
 
They provide a rapid and efficient  method of machinery mounting, without recourse to other methods which can damage floors. 

1. Accurate and rapid height adjustment and levelling. 
2. TICO resilient insert virtually eliminates  floor damage. 
3. Low profile for minimum additional height 
4. Will also fit many existing levelling studs on plant 
5. Wide range to suit many applications and loads

Typical Applications:

• Plant or machinery needing a high degree of levelling for precision operation.

• Transfer systems and conveyors where accurate gradient is required.

• Free-standing equipment needing a quick and economical mounting.

• Test beds and instruments, marking out tables, inspection benches, etc. where a reliable 
horizontal reference is essential.

• Any instance when time constraints prohibit installation by other means.

TICO S/CL clamp strip isolates vibration between pipe-work and hanger, this clamp strip is manufactured from our well known Tico S rubber bonded cork material and is red/brown in colour.

• Manufactured from TICO S  material, proven in industrial applications worldwide.
• Raised shoulder design for positive location.
• Sizes to suit most common strap widths.
• Quick, easy installation.
• Reduction and absorption of shock, noise and vibration.
• Pliable and easy to cut.
• Prevents electrolytic action between dissimilar metals.
• Quality assurance to BS EN ISO 9001.

TICO S/WA Bolt Isolation Washer is used to prevent transmission of vibration and machine noise through the bolt to the surrounding area.
Key Features:

• Isolate bolts from a machine base.
• 6mm thick with an outside diameter of three times the nominal bolt diameter.

A bolt provides a direct transmission path for vibration from the machine to the floor, effectively short-circuiting the TICO pad. To prevent this, it is essential that the bolts are isolated from the machine base. This is achieved using TICO Collars.

Although the vast majority of machinery plant can be secured by TICO Pads and Adhesive, cases where bolts might be employed are where the centre of gravity falls outside the machine base as with an inclinable power press, radial drill, or where the centre of gravity is high.

In these applications, TICO S/WA Washers should also be used to prevent transmission of machine noise and vibration through the bolt to the surrounding area. It is recommended that the nuts not be over tightened so as to firmly locate the machine without applying further compression to the TICO Pads.

TICO S/WA Washers- 6mm thick with an outside diameter of three times the bolt diameter.

TP010061 6.0mm Anti Vibration Pad S/PA 100mm x 1.2M

1in Pipe Grips VHT Type JW352-34 Carbon Steel HDG Galvanised High Temp

Contact S Adhesive - 1L

TL001068 M14 Bolt Isolation Collar S/CO

TE-00586X S/SH 0.75mm Shimming 900mm x 1.2M

TF040510 180mm Adjust Amount JW61-7-2

TK-070120 Clip Strip S/CL JW55-50 12.5mm x 1.2M

TR005197 S Isolating Washer M16 x 48mm O/DX6mm

3/4in" Pipe Grips Guide Type JW352-27 (Stainless Steel) High Temp

Clip Strip Ht/Cl JW55-125 32mm x 1.2m

Clip Strip VHT/Cl 35mm (1m) High Temp

2in Pipe Grips Guide Type JW172-61 (Stainless Steel)

8in Pipe Grips - Grip Type JW152-219 (Stainless Steel)

Clip Strip Ht/Cl JW55-175 40mm x 1.2m

Clip Strip VHT/Cl 55mm (1m) High Temp

2 Part Epoxy - 600g

6in Pipe Grips VHT Type JW352-168 (Stainless Steel) High Temp

2in Pipe Grips - Grip Type JW152-61 (Stainless Steel)

4in Pipe Grips VHT Type JW352-115 (Stainless Steel) High Temp

Tico Pipe-Grip Grip Type JW152-168 6" HSG

Pipe-Grip Grip Type JW152-168 6" HSG

Tico Pipe-Grip Guide Type JW172-43 1 1/4" HSG

Pipe-Grip Guide Type JW172-43 1 1/4" HSG

Our Official Tico Product Range