Brand

Rating

Price

Special Offers

Colour

Includes

Size

Range

1000ppm sensitivity to detect combustible gases,  including natural gas, methane, propane (LPG), diesel, and kerosene, with instant response both audio and visual. Fits in a shirt pocket. 
Specifications:
Sensitivity: > 1,000ppm combustible gas (Methane).
Operating Temp: 32° to 104°F (0° to 40° C).
Warm-up: 7-10 seconds.
Response Time: Instantaneous.
Battery: Two AAA.
Power Consumption: DC 20mA.
Battery Life: 3 continuous hours.
Size: 34.9 x 127 x 19.1cm.
Weight: 0.30 lb. (0.14 kg.).

A simple to use, low cost vibration meter that records, analyses and displays vibration 
signals on a colour screen at the push of a button. Overall vibration values are 
displayed with colour coded alarm levels for ISO values and bearing condition. 
The fully dynamic cursor displays frequency and amplitude values. 
Colour coded frequency band alarms based on run speed can be displayed to 
diagnose machine faults such as balance, alignment and looseness. 
Readings are easily saved and recalled with all alarm levels and settings 
stored in non-volatile flash memory. Run speed and machine type are entered 
with the simple to use set-up wizard.
Size: 200 mm x 60mm x 26mm.
Weight: 280g (not including magnet).
Environmental: water, sand and dust: IP67 waterproof, 
operating: 0°C to 50°C, storage: -20°C to 70°C.
Power supply: 2x AA batteries.
Displayed frequency units: Hertz (Hz), RPM or CPM.
Input range: +/- 50g.
Dynamic range: 72 dB (0.05g resolution).
VA diagnostic bands (RPM = run speed):
Unbalance 1x RPM.
Misalignment 2x RPM.
Looseness 3x RPM.
Accessories: screw in probe tip (1/4" UNF 28). 
Nylon carrying case.
Options: accelerometer mounting magnet. 
Extended probe tip (stinger).

A simple to use vibration monitoring and analysis tool that helps to diagnose faults such as unbalance, misalignment and looseness.

 • Overall vibration values are displayed with colour coded alarm levels for ISO values and bearing condition.
 • Colour coded frequency band alarms based on run speed can be displayed to diagnose machine faults such as balance, misalignment and looseness.
 • VibTrend software enables PC based trending of machine condition over time and generation of reports
 • The fully dynamic cursor displays frequency and amplitude values.
 • Readings are easily saved and recalled, and all alarm levels and settings are stored in non-volatile flash memory.
 • Run speed and machine type are entered with the simple to use setup wizard.
 • BNC connector for external accelerometer.
Size: 200 x 60mm x 26mm.
Weight: 280g (not including magnet).
Environmental: water, sand and dust: IP67 waterproof, 
operating: 0°C to 50°C, storage: -20°C to 70°C. 
Power supply: 2x AA batteries.
Max. frequency resolution: 1.25 Hz @ 800 lines FFT setting.
Displayed vibration amplitude units: acceleration in g velocity in mm/s (or inches/s), bearing noise in BDU (bearing damage units).
Displayed frequency units: Hertz (Hz), RPM or CPM.
Input auto range: +/- 50g or +/- 5g
Dynamic range: 96dB (0.002g resolution)
VA diagnostic bands (RPM = run speed): 
unbalance 1x RPM, misalignment 2x RPM, looseness 3x RPM.
Accessories: standard 100mV/g BNC, accelerometer, 
nylon carrying case.
Options: Tacho strobe/flashlight attachment, 
bluetooth headphones/ear defenders.

The TPI 343 kit comes with all the great features of the 343 with the addition of addtional probes that can be used to check water, tank and ambient room temperatures. The inclusion of the soft carry case allows for effective and secure storage and easy portability. 

Features and Benefits
• Auto field calibrate in less than 10 seconds in ice water
• Temp1, Temp2, Temp1-Temp2 display modes
• Min / Max record function
• Auto Resolution (0.1° / 1°)
• Measurements in °C/°F selectable
• Hold feature freezes reading on display
• Auto off function to preserve power
• Rubber boot for added protection
• Easy to read LCD display 

Specifications
• Measurement Range (K-Type): -58 to 2,462 °F (-50 to 1,350 °C)
• Resolution: 0.1° / 1°
• Connector Type: Submini, Dual Input
• Operating Temperature: 32°F to 122°F (0°C to 50°C)

Contents
• TPI 343 Dual Input Thermometer
• FK11M Immersion Probe
• CK11M Surface Probe
• 2x GK11M Air (Beaded) Probes
• A901 Soft Carry Case

Notes
• Accuracy: -58° to 32°F (-50° to 0°C) = °3°F (1.6°C) 32° to 1100°F (0° to 600°C) = °(0.3% of reading, + 1.8°F (1°C)) 1100° to 2462°F (600° to 1350°C) = °(0.4% of reading, + 1.8°F (1°C)

343/Kit 3 Legionnares Temp Kit

Find the source of combustible gas leaks in valves, pipes, and fittings.

40 PPM methane sensitivity, detects combustible gases including: Methane, Butane, Propane, Gasoline, Diesel and Kerosene. Tick rate can be nullified to eliminate background gas concentration and pinpoint the leak source.

•	40ppm methane sensitivity and bearing defects
•	Trace natural gas lines and fittings for leaks frame to failure
•	Check gas equipment for leaks
•	Test propane tanks, fittings, lines, and heaters for leaks
•	Check propane tanks, fitting lines, and heaters for leaks
•	Test confined spaces for gas build-up

Please see Technical Information below for more information on this product.

725L Pocket Combustible Gas Leakdetector

A simple to use, low cost vibration meter that records, analyses and displays vibration 
signals on a colour screen at the push of a button. Overall vibration values are 
displayed with colour coded alarm levels for ISO values and bearing condition. 
The fully dynamic cursor displays frequency and amplitude values. 
Colour coded frequency band alarms based on run speed can be displayed to 
diagnose machine faults such as balance, alignment and looseness. 
Readings are easily saved and recalled with all alarm levels and settings 
stored in non-volatile flash memory. Run speed and machine type are entered 
with the simple to use set-up wizard.
Size: 200 mm x 60mm x 26mm.
Weight: 280g (not including magnet).
Environmental: water, sand and dust: IP67 waterproof, 
operating: 0°C to 50°C, storage: -20°C to 70°C.
Power supply: 2x AA batteries.
Displayed frequency units: Hertz (Hz), RPM or CPM.
Input range: +/- 50g.
Dynamic range: 72 dB (0.05g resolution).
VA diagnostic bands (RPM = run speed):
Unbalance 1x RPM.
Misalignment 2x RPM.
Looseness 3x RPM.
Accessories: screw in probe tip (1/4" UNF 28). 
Nylon carrying case.
Options: accelerometer mounting magnet. 
Extended probe tip (stinger).

9071 Smart Vibration Meter

A simple to use vibration monitoring and analysis tool that helps to diagnose faults such as unbalance, misalignment and looseness.

The 9080 provides: 
 • Overall vibration values are displayed with colour coded alarm levels for ISO values and bearing condition.
 • Colour coded frequency band alarms based on run speed can be displayed to diagnose machine faults such as balance, misalignment and looseness.
 • VibTrend software enables PC based trending of machine condition over time and generation of reports
 • The fully dynamic cursor displays frequency and amplitude values.
 • Readings are easily saved and recalled, and all alarm levels and settings are stored in non-volatile flash memory.
 • Run speed and machine type are entered with the simple to use setup wizard.
 • BNC connector for external accelerometer.
Size: 200 x 60mm x 26mm.
Weight: 280g (not including magnet).
Environmental: water, sand and dust: IP67 waterproof, 
operating: 0°C to 50°C, storage: -20°C to 70°C. 
Power supply: 2x AA batteries.
Max. frequency resolution: 1.25 Hz @ 800 lines FFT setting.
Displayed vibration amplitude units: acceleration in g velocity in mm/s (or inches/s), bearing noise in BDU (bearing damage units).
Displayed frequency units: Hertz (Hz), RPM or CPM.
Input auto range: +/- 50g or +/- 5g
Dynamic range: 96dB (0.002g resolution)
VA diagnostic bands (RPM = run speed): 
unbalance 1x RPM, misalignment 2x RPM, looseness 3x RPM.
Accessories: standard 100mV/g BNC, accelerometer, 
nylon carrying case.
Options: Tacho strobe/flashlight attachment, 
bluetooth headphones/ear defenders.

9080-Pro Smart Trend Meter

A9073 Accelorometer Magnet

A9072 100mm Long Stinger

A simple to use vibration monitoring and analysis tool that helps to diagnose faults such as unbalance, misalignment and looseness.

 • Overall vibration values are displayed with colour coded alarm levels for ISO values and bearing condition.
 • Colour coded frequency band alarms based on run speed can be displayed to diagnose machine faults such as balance, misalignment and looseness.
 • VibTrend software enables PC based trending of machine condition over time and generation of reports
 • The fully dynamic cursor displays frequency and amplitude values.
 • Readings are easily saved and recalled, and all alarm levels and settings are stored in non-volatile flash memory.
 • Run speed and machine type are entered with the simple to use setup wizard.
 • BNC connector for external accelerometer.
Size: 200 x 60mm x 26mm.
Weight: 280g (not including magnet).
Environmental: water, sand and dust: IP67 waterproof, 
operating: 0°C to 50°C, storage: -20°C to 70°C. 
Power supply: 2x AA batteries.
Max. frequency resolution: 1.25 Hz @ 800 lines FFT setting.
Displayed vibration amplitude units: acceleration in g velocity in mm/s (or inches/s), bearing noise in BDU (bearing damage units).
Displayed frequency units: Hertz (Hz), RPM or CPM.
Input auto range: +/- 50g or +/- 5g
Dynamic range: 96dB (0.002g resolution)
VA diagnostic bands (RPM = run speed): 
unbalance 1x RPM, misalignment 2x RPM, looseness 3x RPM.
Accessories: standard 100mV/g BNC, accelerometer, 
nylon carrying case.
Options: Tacho strobe/flashlight attachment, 
bluetooth headphones/ear defenders.

Our Official Tpi Product Range

We suggest upgrading to Chrome