CheckoutPage-BeforeYouGo

show

Discount-PromoLabel

hide

FamilyPage-Attribute-Selector

VariantThreeDropDown

Header-MainMenu

InfoPage-DiscountCodes

experiment_1

MyaccountPage_Recommendations

New_Login_Registration_Toggle

Notification

Show

Personalised-BoostType

default

ProductPage_Bundle

three_products

ProductPage-Attribute-Selector

ProductPage-Pills-Visibility

Expanded

Quick_View

control

Recommendations

test

Recommendations_Limits

LIMIT_20

Recommendations_withStrategies

Search-Engine

Elastic

search-templates

defaultTemplate

SearchPage_Top_Category

Default

SearchPage-BoostType

boost_img_lt_atb

SearchPage-Enable-Sort-Attribute-Value

AttributeValueSortOnSearchAndCategory

SearchPage-LeadTimeFilter

TopProducts-AddToBasket

Vertical-Recommendations_Toggle

Brand

Rating

Price

Special Offers

Diameter

Product Type

Length

UTP Soudonel is a synthetic basic-coated nickel-base stick electrode used for joining and cladding of high-temperature resistant Ni alloys, cold-tough steels, and stainless steels. UTP Soudonel can also be used for dissimilar joining of these materials, especially for repair jobs where good elongation of the pure weld metal is requested.

Instructions  
1. The weld zone must be bare and properly degreased.  
2. Prior to welding, the electrodes must be predried for 2-3 hours at 250-300�C.  
3. The electrode is welded with a slight tilt, short arc, and sufficiently high amperage adjustment.  
4. To avoid end crater cracks, the crater must be filled properly and the arc drawn away to the side.  

E Ni 6182 (NiCr15Fe6Mn) E NiCrFe-3

UTP 6222 Mo is a nickel-based welding wire that is particularly suited for joining and surfacing on a variety of nickel alloys, austenitic steels, and low temperature nickel steels. It is also suitable for use in austenitic-ferritic joints and claddings. The weld metal is heat resistant and can withstand operating temperatures up to 1000 degrees Celsius. However, it is important to note that prolonged heat treatment within the temperature range of 600 to 800 degrees Celsius can result in a slight decrease in ductility. UTP 6222 Mo is also scale-resistant in low-sulphur atmospheres up to 1100 degrees Celsius and has high creep strength.

Benefits:
Nickel-based welding wire.
Particularly suited for joining and surfacing on a variety of nickel alloys, austenitic steels, and low temperature nickel steels.
Heat resistant and can withstand operating temperatures up to 1000 degrees Celsius.
Prolonged heat treatment within the temperature range of 600 to 800 degrees Celsius can result in a slight decrease in ductility.
Scale-resistant in low-sulphur atmospheres up to 1100 degrees Celsius and has high creep strength.

Ordering
UTP 6222Mo 2.5mm x 300mm - 66203
UTP 6222Mo 3.2mm x 350mm - 85033
UTP 6222Mo 4.0mm x 350mm - 80116
UTP 6222Mo 5.0mm x 400mm - 80117

UTP A 6225 Al is suitable for welding of identical and similar alloys, such as NiCr25FeAlY, Material-No. 2.4633. These alloys are applicable for working temperatures up to 1200° C, particularly for thermal treatment ovens. High oxidation resistance at high temperatures (also in cyclic conditions) , very good corrosion
resistance in carburized medias, excellent high temperature resistance.

6225 AL 3.2mm NiCr25FeAlY

UTP Soudonel is a synthetic basic-coated nickel-base stick electrode used for joining and cladding of high-temperature resistant Ni alloys, cold-tough steels, and stainless steels. UTP Soudonel can also be used for dissimilar joining of these materials, especially for repair jobs where good elongation of the pure weld metal is requested.

Instructions  
1. The weld zone must be bare and properly degreased.  
2. Prior to welding, the electrodes must be predried for 2-3 hours at 250-300C.  
3. The electrode is welded with a slight tilt, short arc, and sufficiently high amperage adjustment.  
4. To avoid end crater cracks, the crater must be filled properly and the arc drawn away to the side.  

E Ni 6182 (NiCr15Fe6Mn) E NiCrFe-3

Soudonel Nickel-Based Maintenance & Repair Electrode (E NiCrFe-3) - 4.0mm

UTP 6222 Mo is a nickel-based welding wire that is particularly suited for joining and surfacing on a variety of nickel alloys, austenitic steels, and low temperature nickel steels. It is also suitable for use in austenitic-ferritic joints and claddings. The weld metal is heat resistant and can withstand operating temperatures up to 1000 degrees Celsius. However, it is important to note that prolonged heat treatment within the temperature range of 600 to 800 degrees Celsius can result in a slight decrease in ductility. UTP 6222 Mo is also scale-resistant in low-sulphur atmospheres up to 1100 degrees Celsius and has high creep strength.

Benefits:
Nickel-based welding wire.
Particularly suited for joining and surfacing on a variety of nickel alloys, austenitic steels, and low temperature nickel steels.
Heat resistant and can withstand operating temperatures up to 1000 degrees Celsius.
Prolonged heat treatment within the temperature range of 600 to 800 degrees Celsius can result in a slight decrease in ductility.
Scale-resistant in low-sulphur atmospheres up to 1100 degrees Celsius and has high creep strength.

Ordering
UTP 6222Mo 2.5mm x 300mm - 66203
UTP 6222Mo 3.2mm x 350mm - 85033
UTP 6222Mo 4.0mm x 350mm - 80116
UTP 6222Mo 5.0mm x 400mm - 80117

6222Mo Nickel Electrode ENiCrMo-3 - Tin - 3.2 X 350mm

UTP A 6225 Al is suitable for welding of identical and similar alloys, such as NiCr25FeAlY, Material-No. 2.4633. These alloys are applicable for working temperatures up to 1200° C, particularly for thermal treatment ovens.

High oxidation resistance at high temperatures (also in cyclic conditions) , very good corrosion resistance in carburised medias, excellent high temperature resistance.

6225 AL Electrode - E NI 6704 - NiCr25FeAlY - 2.5mm - 2.9kg Tin

Our Official UTP Maintenance Product Range

We suggest upgrading to Chrome