Brand

Rating

Price

Special Offers

Automotive Service & Shop Tools - Free UK Delivery Over £25 - Buy Online | Zoro

The set contains 4 adapter sockets to disassemble the nozzle head with electrical connection along with 3 clutch adapters for jet screw threading operation	As soon as the nozzle head and jet needle are disassembled, traction adapters can be screwed in for disassembly with the slide hammer or bridge and the hydraulic cylinder	The particularly slim shape allows access even with very close injectors	ApplicationsUniversal use e.g. for BMW, Mercedes, Peugeot, Citren, Ford, Renault, Nissan, etc.

Electronic Diesel Injector Removal Socket Set

Set of specialtools to remove the injector onFord vehicles	Providesremoval ofheavily seized injectors in aprofessional,safe and fast way	Non-seized injectors can be removed using the fork and reused asrequired	Includes tools for extraction of injectors in single parts if broken	Applications:Ford 2.0 Eco Blue  engines from 2016 in Galaxy/S-Max/Mondeo/Focus C-Max/Transit and Custom (from 2018) etc.Engine codes: YLFS 77 kW  YLF6 77 kW  YMFS 96 kW  YMF6 96 kW  YNFS 125 kW  YNF6 125 kW  YLR6 77 kW  YMR6 96 kW  YNR6 125 kWFor particularly tight injectors, do not use the fork extractor, we recommend the use of our hollow piston mechadraulic cylinder of 12 tonnes; GO1015

Ford Injector Removal Set

Universal Glow Plug TipExtraction Set - Master M8X1-M9X1-M10X1-M10X1,25. Double Pulling SystemFor the extraction of the electrode terminal part of the glow plugs (M8, M9, M10) in the event of breakage or sticking inside the seat port, which is otherwise impossible to remove.The set includes all the tools needed to safely remove the terminal part of the glow plug electrode without damaging the cylinder head.This operation can be completed with a slide hammer or threaded extractor.

Univ Glowplug Tip Extraction Kit - Master

Special socket for the removal of CH. 29 and CH. 30 Bosch injectors	Adaptor allows the injector to be removed without opening or dismantling	The socket holds the injector under the fixing nut of the electrical connection, allowing the removal of the injector without removing the plastic top of the electrical connection

Bosch CR Removal Socket

Can be used with any current diesel engines using threading sizes M8 x 1, M9 x 1, M10 x 1, M10 x 1.25	Extracts broken glow plugs stuck in the cylinder head with ease	Drill is guided precisely into the cylinder head using the glow plug threading; avoiding damage to the cylinder head	The glow plug tip is then extracted with the help of the extraction rod and a striking hammer	Applications: Citron/Peugeot: 1.4, 1.6L HDI Ford: 1.4, 1.6L TDCI Mazda: 1.4 CD Suzuki: 1.4L DDIS Toyota: 1.4 HDI Volvo: 1.6D, etc.

Universal Glow Plug Tip Extraction Master Kit

Multi-Stage Injector Puller Kit for use on M9R injectors - For use with a hydraulic injectorpuller such as 185800V2Applications	Double fixing	Renault/Nissan, Opel 2.0 dCi

M9R Injector Extractor Plate

For use with 08585000, GO520 & GO530	Heavy Duty Suspension Hook for use with slide hammers when repairing axles and bodywork	Ideal for loosening connections on the oscillating trapezoidal arm (ball joint / tightening hole) and on the wheel bearing housing with the spring struts inserted	Also ideal for straightening work on columns A, B or C due to the bracket profile	Technical data:	Connection thread: M18x1.5	Internal height: 110 mm	Hook Width: 40 mm	Total weight: 2.34 kg	Applications Include	Ford Mondeo, Mercedes-Benz Vito front axle etc.

Heavy Duty Suspension Hook

The tool set for the disassembly and assembly of the DSG (Direct-Shift Gearbox) is designed to remove the clutch casing, including the discs, of 6-speed (code 08D) and 7-speed (code 0AM) VAG gearboxes, dual clutches (K1 and K2) and multiple shafts used in cars of the VAG Group from 2004 to 2012.Included pliers to remove/install the main shaft safety ring.AUDI applicationModels: A3SEAT applicationModels: Altea, Altea XL, Ibiza, Leon, ToldeoSKODA applicationModels: Fabia, Octavia, Roomster, Superb, YetiVW applicationModels: Golf, Golf Plus, Jetta, Passat, Polo, Scirocco, Touran

DSG Clutch Removal Kit VW Group

14 piece special centering tool set for vehicles without pilot bearings in the crankshaftEnsures proper installation of the self-adjusting clutch whilst avoidingerratic adjustment of the adjusting ring in the clutchs mechanisms to provide smooth clutch operation.3-arm truss for flywheels with six mounting screws and 4-arm truss for flywheels with eight mounting screws.

Self Adjusting Clutch (Sac) Installer Master Kit

Universal pneumatic tool for assembling and disassembling engine valves, suitable for all types of valves on petrol and diesel engines.Practical and easy to use,saving up to 60 - 70% time, especially during valve assembly. Made for engines with 4/5 cylinder valves.Technical data	CE approved machine in compliance with 2006/42/CE (Machine Directive).	Case Dimensions: 485x375x135 mm	Machine weight: 6 Kg	Working pressure: min 6 bar, max 10 bar	Power: 6 bar=118 Kg, 10 bar=196 Kgf

Valve Spring Compressor - 196 Kgf

For pressing out seized and bonded drive shafts and also, with the optional Govoni slide hammer GO421, for removing the wheel hubConsiderable time savings - no damage to the thread - wheel bearing is not damagedOptimised hole pitch for maximum coverage of models within the marketSuitable for 2, 3, 4, 5 and 6-hole bolt pitch on hubs with stud bolts and wheel boltsContents:1 x extractor with mounting thread 1-1/2-16G1 x reducing adapter ring for mechanical spindle,1-1/2-16G x M22x2.01 x mechanical spindle, M22x21 x pulling flange, 96-142 mm for 3, 4, 5 and 6- holebolt hub, for M12/M14 bolts5 x conical washers1 x solid lubricant paste

Extractor Set - Drive Shaft/Cv Joints

ON VEHICLE SOLUTION60 - 76MM OUTER DIAMETER	New design for precise and safe centering and alignment of components	Suitable for when hub and bearing are separate rather than integrated	Suitable for wheel bearing extraction / installation as well as for use on hubs, silent blocks and elastic supports in general	Large number of bushings and washers to cover a wide range of models and applications	Manual application with M20 300mm spindle (included in the set) or with 17 ton hydraulic cylinder - stroke 43 mm code GO1017 or GO1061 (cylinder not included, GO016 M20 500mm spindle also required, available separately)

Wheel Bearing Set

Easy fitting and mounting of wheelsEspecially dedicated for cars with short axle tie with free turning brake disc without centering screwBolts are placed into the wheel bolt holesVery quick mounting without any threadFor wheel bolts M12 and M14Advantages:1. Free mounting of the wheel locking boltsThe full weight is resting on the centering bolts which allows for2. No risk of heavy wheels falling; decreasing the likelihood of injury to the operatorContents:1 x Fit up bolt M12 x 127.5 mm1 x Fit up bolt M14 x 127.5 mm2 x Replacement sleeve M12 x 27.8 mm2 x Replacement sleeve M14 x 27.8 mm1 x support

Wheel Centering Bolt Set

Allows application of up to 12 tons of hydraulic force which can be used to provide a controlled force in place of the mechanical effort required when using the GO410 / GO426Technical data:Dimensions:  80x55 mmStroke: 8 mmDriving torque: 67NmWeight: 2.5 KgHole:  21.5 mm

12T Mechadraulic Cylinder

Compatible with 18780500Universal C-Clamp	Allows the clamping of press frames and C-frame to be placed on a transmission jack	Greatly facilitates the positioning of the components press frames when replacing bearings, bushings,load-bearing joints, etc. directly on the vehicle	This tool can be adjusted androtated. The press frames can beplaced between the jaws	Use with GO102 to suit transmissionjacks from other manufacturers	Base diameter - 40.6mm

Press Frame Support Clamp For Transmission Jacks

Upgrade kit for the GO010 Universal Hub Puller and Drive Shaft SetContents:1 x Bolt adapter-set M12x1.25, 5pcs.1 x Bolt adapter-set M12x1.50, 5pcs.1 x Bolt adapter-set M14x1.50, 5pcs.

Spacer & Extension Set for GO010 CV Joints

Due to the mechanical properties, shape and size, the Govoni Mechadraulic-Spindle is optimally suited for use in the automotive sector for removal and installation of wheel hubs, drive shafts, supporting joints, tie rod heads, pitman arms, silent bearings etc.The 1-1/2 inch x 16 tpi receiving thread is one of the most commonly used special tool threadsTechnical data:Force: 156.960 NStroke: 20 mmDimensions: 38 x 225Total length: 345Weight: 1.7 KgUse temperature: -10C  65CBasic oil viscosity at 40C ASTM D 445: ISO VG 150Max. driving torque/Max. pressure: 38 Nm/2.600 Bar

16T Mechadraulic Spindle & Adapter Kit

The set contains tools for removing bearing units with diameters of 62-85 mm. 

This set can be expanded as required with the corresponding half shell sets for installation.

The repair work can be performed directly on the vehicle.

Easy to use 

Significant time savings

No damage to the bearing.

 

Application

Disassembly: it can work on bearings with an external from Ø62 mm up to Ø85 mm.

 

Sizes and applications of the half shell set (HSS) 

Half shell removal:

1 x HSS for Ø 62, 66, 68, 72, 75, 78, 82, 85 mm/universal

GO055 Compact Wheel Hub/Bearing Unit Removal Kit

To loosen and tighten fuel filters and oil filters.

The wrench is equipped with 2 extension half-shells (toothed on the inside) , which are attached directly to the jaws of the filter wrench and can be secured in place. It can be used with or without extensions.

Can be used for filters with and without guide profiles

GO605 Oil Filter Wrench Kit

Full assortment for correct removal and installation of compact bearing hub units on vehicles ranging from passenger cars to transporters.
The perfect set for all current bearing units with diameters of 62 - 85 mm.


Includes a threaded spindle M20 and nut, and a counter-pressure nut with pressure bearing for mechanical operation. For frequent use with large bearing units or badly corroded bearings, we recommend the optional 12-tonne hydraulic cylinder GO1012.


The special half shells grip behind the wheel hub during installation and press on the snap ring located directly on the bearing outer ring.


This prevents damage to the bearing and allows the snap ring to engage evenly.
The repair work can be performed directly on the vehicle.
Easy to use - significant time savings - no damage to the bearing.

Sizes and assignment of half shell sets (HSS) 
Installation: 
1 x HSS size 1 for Ø 62 mm
1 x HSS size 2 for Ø 66, 68 mm
1 x HSS size 3 for Ø 72, 75, 78 mm
1 x HSS size 4 for Ø 82, 85 mm

Removal: 
1 x HSS for Ø 62, 66, 68, 72, 75, 78, 82, 85 mm

GO030 GEN2 Wheel Bearing Master Kit 62-85MM

Use this tool kit to remove and refit slotted bushes properly. The slight conical grinding makes it possible to extract and reuse bushes without damage.

The tools may be fit directly on the vehicle without removing entire axes components. Pressers may also be used on the workshop press.

By means of the locking device and relating half-shells, bushes are pre-tensioned carefully and parallel to one another so they can be pressed easily into their seat. While the bush is often damaged using commercial tapered sockets, the assembly operations do not damage/deform/detach the bearing's cover when this locking device system is used.

The half-shells are fixed securely inside the locking device so they will not slip out.

The kit includes a wide selection of the most common applications with high market coverage. Other half-shell kits will soon follow to ensure the subsequent removal of the system.

Due to the partly enormous forces required especially for removal, the use of a hydraulic cylinder is recommended. The Govoni 12-ton hydraulic cylinder is therefore optimal for integrations. (See kit GO1310R to purchase with the GO1012 Hydraulic Cylinder) 

Application

Ø 75mm MB Actros (stabilizer) 
Ø 70mm MAN
Ø 68mm MAN (front spring) ROR, SAF
Ø 66mm IVECO Eurostar (driver’s cabin) 
Ø 65mm MB Actros (stabilizer) , Atego
Ø 63mm DAF
Ø 60mm MB/IVECO Eurostar (stabilizer) , Renault Kerax, Magnum, Premium (leaf spring eye) 
Ø 58mm MB 3229 B, 652, 650/Volvo
Ø 56mm IVECO Eurostar (driver’s cabin)

GO1310 HGV Split Bush Master Kit

Diagnostic wiring, with the function of analyzing the vehicle's CAN network through the self-diagnosis connector with display of the values and outcome of the test. For use with GO2100PRO

GO2114 Diagnostic Can Test

For the quick removal of wheel hubs and bolted wheel bearings. Simple and efficient method to remove front wheel hubs quickly and without too much effort in terms of assembly.

The new slide hammer version is filled with steel shot. This prevents the weight from bouncing back against the stop. The impact intensity is thus increased because the full impact force is transmitted to the component to be removed.

Slide hammer technical data:

Weight: 3Kg
Total length: 580mm
Connection - Thread: M18x1.5
 

Applications:

Injectors
Hubs
Support joints
Bodywork works

Browse our original Govoni products in Automotive Service & Shop Tools

We suggest upgrading to Chrome