Brand

Rating

Price

Special Offers

Product Type

Automotive Service & Shop Tools - Free UK Delivery Over £25 - Buy Online | Zoro

For fitting windscreens with plastic and rubber inserts on older vehicles
Contents include: Tool Handle, 2 eyes 10.5mm and 17mm
Plus 2 lipping tools with Hex Key for fixing

Windscreen Installation Tool Set - 77136

The Xenon Timing Light allows the dynamic ignition timing to be set. Includes inductive pick-up for simple connection. Capable of delivering up to 5000 flashes per minute. Suitable for any petrol engined vehicle with 12v ignition system including electronic types where applicable though some ignition systems are not externally adjustable. Indicates ignition timing and allows adjustment to manufacturer’s specification Inductive pickup clips directly on the ignition HT lead Powered by vehicles own 12v battery The special Xenon bulb provides the ultrabrite flash needed to see engine timing marks under normal daylight or bright workshop conditions. • Operates on all 12volt ignition systems • Xenon bulb providing Brilliant Blue/White • 1,000,000 flash capacity • Automotive reverse polarity and overload protection • Inductive pick-up • Replaceable Xenon flash tube available, please see Part No. 77009. Suitable for any petrol engine vehicle with 12v ignition systems.Also suitable for some electronic types. Max. RPM (4 stroke) 9999 RPM, Max. RPM (2 stroke) 5000 RPM.NOTE: 4 stroke wasted spark ignition systems =Max 5000 RPM. The Xenon timing light allows the dynamic ignition timing to be set. Includes inductive pick-up for simple connection.

Timestrobe Xenon Timing Light

A simple and effective tester shows the condition of the brake fluid with a coloured response
Green indicates brake fluid is 1.5% water and Ok whilst red indicates 3% water and fails the test
Automatic shut off when not in use

Brake Fluid Tester - 77002

Easy fluid replacement system using air pressure from the spare wheel to bleed brake and clutch hydraulics. Safe to use, the one-way flow mechanism and airtight seal on the reservoir ensures fast fluid replacement with no contamination. There is no need for pedal pumping which avoids the risk of damaging the master cylinder seal. The versatile kit includes four screw caps (25, 27, 44-45, 46mm) and three hoses, making it easy to connect Eezibleed to a wide variety of vehicles. Suitable for single handed operation. Uses the air pressure from a spare tyre to effortlessly bleed hydraulic systems.Can be used successfully on the following systems: tandem master cylinders without sensors, tandem reservoirs, slave servos, vacuum servos. Includes a range of cap & seal sizes: 25mm (Lockheed systems), 27mm (certain VAG systems), 44/45mm (metal Girling reservoirs & all ATE systems), 46mm (certain Girling systems). Kit contains: pressure bottle (for new brake fluid), bottle cap assembly, bleed tube set, 5x cap & seal sets, brass reservoir cap fitting, 2x fibre washers, lock nut & hook.

Eezibleed Kit

This six piece compression tester kit includes a 380mm high pressure hose with braided stainless steel casing, 14 | 18mm adaptor plus 10 | 12 | 14mm long reach adaptors.The Dti has large, easy to read 2 1/2" dial face with accurate Bourdon tube meter. For petrol engines onlyLarge easy to read 2 1/2" dial face with accurate Bourdon tube meter movement Dual calibrated and colour coded scales Dual 14 /18mm adaptor is fitted to the hose for quick and easy testing of most modern engines

Compression Tester Kit - 6 Piece

The Trakrite camber bar allows either of the Gunson camber gauges to be used with the wheels on the vehicle and the vehicle sitting on the ground. It is ideal for alloy wheels when the magnetic base of the camber gauge cannot be attached to the wheel hub. The bar is fully adjustable and can either be hung onto the tyre or held in place by hand to provide a precise base point for measurement. When the gauge is levelled and set up, the camber angle, castor and KPI can be clearly read from the gauge. Designed by Gunson in the UK, the Trakrite camber bar makes it quick and easy to take important measurements, even on alloys. Ideal for quick checking of camber, caster and KPI when used with Gunson gauges, Part Nos. 77099, 77066.The camber bar is fully adjustable for wheels up to 18 inch in diameter and designed to hang on the tyre giving hands free operation. Where the vehicle wheel arch is too low for the camber bar to hang on the tyre it can still be used without the top bracket (held in place by hand). For car and light commercial use.

Trakrite Camber Bar - 77137-T

Trakrite is the simplest, most accurate device for checking the wheel alignment of cars, light commercial and vintage vehicles. Properly aligned wheels improve a car's handling, safety and fuel economy and reduce tyre wear. Trakrite makes it is easy to check wheel tracking. Simply drive slowly over the ramp, with the wheels in their straight ahead position and the roller mounted top plate will move to show any toe in or toe out issues. The dial indicator is easy to read and clearly shows the degree of any misalignment. Tracking angles can also be modified to obtain a specific handling characteristic, which can be useful for motorsport and off-road applications. An essential tool for simple and accurate wheel alignment checks and maintenance. Suitable for the professional user, fleet operator or private motorist. Checks the alignment of steering wheels on cars & light commercial vehicles.Easy and simple to operate with no technical knowledge needed. Tests accuracy in only 5 minutes. A roller bearing platform over which one front wheel is slowly driven with the wheels in their straight ahead position. Can be used to track both front drive wheels & rear wheels.

Trakrite Wheel Alignment Gauge

Valve clearance is easy to adjust on all push rod engines or OHC engines with top adjustment.  Clik-adjust makes the job easier and absolutely precise.  This essential clearance adjustment ensures the valves (inlet and outlet) open and close correctly resulting in better engine performance. Adjusts tappets preciselyMicro adjustment No need to use feeler gauge after its set up. Suits all push rod valve engines and OHC engines with Flat head top adjustments screws.1/2"D for any size lock nut.

Clikadjust Tappet Adjuster

This system sets the standard for affordable brake and clutch bleeding systems. Using air pressure from a spare wheel it will effortlessly bleed hydraulic systems. There are a number of adaptors available to fit most vehicles with screw cap reservoirs. Supplied for the French market, complete with French packaging and instructions. Suitable for one man operation.Uses the air pressure from a spare tyre to effortless bleed hydraulic systems. The Eezibleed kits contains a special pressure vessel to hold the new fluid, spare bottle seal part number G4062/80. Can be used successfully on the following systems: Tandem master cylinders without sensors Tandem reservoirs, Slave servos, Vacuum Servos.

Browse our original Gunson products in Automotive Service & Shop Tools

We suggest upgrading to Chrome