Brand

Rating

Price

Special Offers

Colour

Shield Colour

For Use With

Shield Material

Product Type

Eye Protection - Free UK Delivery Over £25 - Buy Online | Zoro

the MSA V-Gard visors fit easily into the V-Gard frames for V-Gard safety helmets. The visors reliably protect against impact, splashes, and UV radiation. They are contoured for a closer fit to the face and offer more protection to the sides of the face.

Features and Benefits
• Fit easily into V-Gard standard frame and can be used on a wide range of V-Gard helmets for customisability
• Contoured around the face for higher levels of protection around the face

Notes
MSA-957-1011E should be used with the MSA V-Gard retractable chin guard

The V-Gard® Accessory System offers helmet-mounted frames for various work conditions and MSA helmets. Designed for use with V-Gard® Frames and V-Gard® Headgear. Use V-Gard® Frames ONLY with V-Gard® Visors, to ensure compliance with safety standards. All visors can be worn with helmet-mounted ear muffs. 

10115841 General Purpose Visor
Anti-fog and scratch resistant.

10115845 Welding Visor
MSA moulded polycarbonate visor. Optically correct. Anti-fog and anti-scratch coatings. 2.5mm thick.

10115855 Chemical Visor
Distortion-free optical clarity. 2.5mm thick.

10116557 General Purpose Mesh Visor
Lightweight and durable. Wide face coverage. Durable, epoxy-coated 20 x 20 steel mesh. Anti-fog and scratch resistant.

Clear polycarbonate contoured half mask for a close fit to the face and provides resistance to impacts and splash hazards. Simple push button application to the V-Gard H1 helmet, requiring no additional adapters or frames. The anti fog coating and the frameless design helps with visibility whilst still being wind resistant.

Features and Benefits
• Simple push button application to attach and detach from V-Gard H1 safety helmet
• Anti fog coating and frameless design helps with visibility
• Selection of full or half face masks for ensuring the correct face shield is selected for the usage
• No additional frames or adapters required

The MSA S-Cap respirator hood is a respirator that is ideal for use in the event of a fire escape. It comes in either a pouch or a carton for easy storage, and can be deployed quickly for 15 minutes of escape time in emergency situations. The inbuilt filter in the S-Cap respirator hood can combat the carbon monoxide and smoke fumes present in fire emergencies whilst the hood can protect you from short flame contact and heat.

Features and Benefit
• Easy deployment in emergency situations and can easily be applied in rescue and evacuation and even on those who are unconscious
• Inbuilt respirator filters carbon monoxide and smoke fumes and allows for 15 minutes of breathable air in emergencies

Balanced lightweight electrician’s safety helmet, non-vented, with 6-point Fas-Trac® III ratchet suspension and GS-ET-29 class 1 face shield certified for protection against arc flash. For use where top impact hazards to the head, chemical splash, Ultra-Violet radiation, molten metal splash or electric arc to the face exist. The helmet is made of ABS for strength and lateral crush protection (LD option), Modern, dynamic with sports styled shell, Low profile (patented visor mechanism which minimises helmet shell size), Channel around perimeter of the helmet diverts rain and debris from user, The face shield has premium anti-fog/anti-scratch coated visor fits over all corrective and safety glasses, 6-point Fas-Trac® III ratchet suspension with premium washable and replaceable sweatband, Complete with 4-point chinstrap for better helmet retention, Helmet delivered in a protective reusable storage bag, Compatible with hearing protection, Optional chin cup made with arc flash resistant materials, Arc flash ear flaps, badge & Lamp holders, logo customisation and stickers available upon request, Other colour helmet shells available - Yellow, Red, Green, Blue and Orange Conforms to the following Standards, Anti-static assembly; certified electrostatic-INERIS for use in ATEX/explosive environments, Electrically insulating helmet meeting EN 397:2012 Industrial safety helmets 440 V AC and EN 50365 Insulating helmets for use on low voltage installations 1000 V AC, EN166:2001 personal eye equipment 2C-1,2 1 3 B 8-1-0 9 KN, GS-ET 29 Electric Arc, class 1, 4KAMSA Reference: GVF1A-80A0000-000

the MSA V-Gard visors fit easily into the V-Gard frames for V-Gard safety helmets. The visors reliably protect against impact, splashes, and UV radiation. They are contoured for a closer fit to the face and offer more protection to the sides of the face.

Features and Benefits
• Fit easily into V-Gard standard frame and can be used on a wide range of V-Gard helmets for customisability
• Contoured around the face for higher levels of protection around the face

Notes
MSA-957-1011E should be used with the MSA V-Gard retractable chin guard

V-Gard Visor, Clear, 1.0mm Thickness, UV Protection

• 8" (20.3 cm) x 17" (43.2 cm) x .098" (2.5 mm). 
• Impact-rated protection. 
• Molded for superior optical quality. 
• Extra thick to help prevent warping, cracking or crazing under tough work conditions.  
• Meets requirements for EN 166 (MSA 1 B 3), ANSI/ISEA Z87.1-2010, CSA Z94.3 and AS/NZS 1337.

10115855 Clear Chemical Visor for V-Gard Helmet

Clear polycarbonate contoured half mask for a close fit to the face and provides resistance to impacts and splash hazards. Simple push button application to the V-Gard H1 helmet, requiring no additional adapters or frames. The anti fog coating and the frameless design helps with visibility whilst still being wind resistant.

Features and Benefits
• Simple push button application to attach and detach from V-Gard H1 safety helmet
• Anti fog coating and frameless design helps with visibility
• Selection of full or half face masks for ensuring the correct face shield is selected for the usage
• No additional frames or adapters required

V-Gard H1 Half Face/Spectacle Cover, Clear

The MSA S-Cap respirator hood is a respirator that is ideal for use in the event of a fire escape. It comes in either a pouch or a carton for easy storage, and can be deployed quickly for 15 minutes of escape time in emergency situations. The inbuilt filter in the S-Cap respirator hood can combat the carbon monoxide and smoke fumes present in fire emergencies whilst the hood can protect you from short flame contact and heat.

Features and Benefit
• Easy deployment in emergency situations and can easily be applied in rescue and evacuation and even on those who are unconscious
• Inbuilt respirator filters carbon monoxide and smoke fumes and allows for 15 minutes of breathable air in emergencies

S-cap Emergency Escape Respirator Hood, in Carton

Compatible with all MSA V-Gard and ThermalGard safety helmets except the V-Gard H1, Easy mounting directly on PushKey or Fas-Trac® III suspensions, Adjusters for better size setting, Compatible with helmet-mountedear defenders, Very comfortable soft & narrower black strap OEKO-TEX® certified, No metallic parts for a use in electrical applications

V-Gard Textile Universal 4-Point Chinstrap  - Pack of 20

V-GARD 950 ELECTRICIAN SET WHITE C/W RED STICKERS

V-Gard chin protectors provide additional protection to the face and neck from impacts, chemical splash and arc flash making them suitable in a wide range of environments, The standard chinguard is easily mounted to specific V-Gard visors versions including the MSA10115856, MSA10115837, MSA10154950 and MSA10154967

V-Gard Standard Chinguard  Pack of 5

V-Gard PC sheet visors reliably protect against impact, splashes and UV radiation. , The visor sides are contoured towards face for a closer fit and improved resistance to impact and splash hazards. , They are the perfect solution for general and basic applications, All V-Gard visors easily fit to V-Gard Browguard, MSA10127061 and on V-Gard frames for all V-Gard helmets. , They can also be worn in combination with helmet mounted ear muffs. The dimensions of the visor are 203 x 432mm with a thickness of 1.5mmThe Visor conforms to the following: EN166:2001 Personal Eye Protection (2C-1,2 1B)2C - UV filter with enhanced colour recognition1,2 Clear or amber ocular1 Optical class 1 for permanent usageB Medium energy impact protection (120M/S)3 Protection against droplets and splashes of liquids9 Non adherence of molten metals and resistance to penetration of hot solids

V-GARD GENERAL PURPOSE PC SHEET VISOR CLEAR 1.5MM

V-Gard propionate visors provide impact protection, and are good for those applications where chemical splash hazards also exist, They offer increased impact protection and superior optical quality over acetate visors , Being moulded makes them optically correct, and helps ensure they maintain good visibility and reduced eye fatigue. Their chemical and heat resistance is better as they are thicker and not as stressed as flat visors. MSA10115851 cannot be worn in combination with helmet mounted ear defenders or MSA chingards. It can fit to the V-Gard Browguard, MSA10127061, The visor dimensions are 203 x 457 with a thickness of 2.5mm. The visor conforms to the following:EN166:2001 Personal Eye Protection (1B 3)1 Optical class 1 for permanent usageB Medium energy impact protection (B = 120 m/s)3 Protection against droplets and splashes of liquids

V-GARD PROPIONATE MOULDED VISOR CLEAR LARGE

V-Gard Headgear is a brow guard that in combination with the wide range of V-Gard Visors offers a lightweight, comprehensive face protection system. Featuring a durable and stylish HDPE frame and the choice of over 20 visors it is ideal for many applications. With the unique 3-point visor load system visors are fitted or removed easily and quickly. Adjustable to all head sizes and with two comfort sweatbands all day comfort is ensured. Self-retaining, easy-to-grip visor adjustment knobs – no more lost parts!, Seven-point crown adjustment to fit most head sizes and shapes, Replaceable, sweat-wicking, cushioned headband helps keep workers dry and cool , Sweat-wicking ratchet cover keeps nape comfortable , For use ONLY with wide range V-Gard Visors; not for use where head protection is required , All non-metal construction , Conforms to EN1731:2006 Personal eye protection. Mesh eye and face protectors, Conforms to EN 166:2002 Personal eye protection. (When worn with appropriate visor)

V-GARD STANDARD BROWGUARD

Fas-Trac III ratchet suspensions designed for MSA V-Gard® industrial safety helmets. Extensive customer research shows the Fas-Trac III suspension was preferred by most users over what they were currently wearing because its improved helmet comfort, retention and stability whilst being easy to use with or without glovesMSA Fas-Trac III suspensions features and benefits, BALANCE & STABILITY:- Lower nape strap improves retention: Helmets stay on when leaning over- Adjusts for a custom fit to the back of the head, HEADBAND COMFORT:- The comfort pad by separating the ratchet from the head, cradles the head increasing comfort and cooling airflow- Prevents hair from getting pulled, EASE OF USE:- Ratchet offers smooth rotation: reduced effort to turn- Easy grip knob adjustable even with gloves on, ADJUSTABILITY:- Three levels of nape height adjustment giving superior nape fit- Avoids interference with other PPE such as ear muffs, SWEATBAND COMFORT:- Largest sweatband surface area on the market covers more of the headband and user's forehead for increased comfort- 2 different sweatband options: sewn in PVC perforated wipeable or sweat-wicking washable foam (breathable fabric allows direct air permeation)- Replaceable foam sweatband can be attached over the existing sweatband without demounting the suspension- Also available Terry cotton washable sweatband, MSA696688 that can be used over both sewn in PVC or replaceable foam sweatbands for increased user comfort

Fas-Trac III Suspension with Sewn in PVC Sweatband  - Pack of 20

The Standard HDPE frame uses slot adapters compatible with any MSA slotted helmets (included with each frame) and a wide choice of V-Gard visors, Works with or without ear defenders- adaptors stow away when using ear defenders resulting in no more lost parts, Conforms to EN 166 (When worn with appropriate visor)- 3 = Liquids- 8 = Resistance to short circuit electric arc- 9 Non adherence of molten metals and resistance to penetration of hot solids- B = Medium Energy Impact (120 m/s)- T = Impact resistance at extreme of temperatures (-5/+55°C), Conforms to EN 1731 (When worn with appropriate visor)- F =Low Energy Impact (45m/s)

V-Gard Standard Frame - MSA10121266

Push-Key suspensions designed exclusively for MSA V-Gard® Industrial Safety Helmets. The Push-Key suspension with its innovative adjustment concept brings an extraordinary way to enhance user retention and comfort.Push-Key the new suspension with the best cost-benefit ratio offered in the market.MSA Push-Key suspension exclusive features and benefitsEASE OF USE:, This is the fastest sliding suspension on the market: simple push to loosen, squeeze to tighten, Can be adjusted with one hand even when wornSURE FITTING:, It offers greater retention capacity than competitive sliding suspensions because it's so much easier to select the best adjustment positionADJUSTABILITY:, 2 levels of nape adjustment for fitting comfort, Designed to avoid interference with other PPE such as ear muffsSWEATBAND COMFORT:, 2 different options: sewn in PVC perforated wipeable or sweat-wicking foam, Also available Terry cotton washable sweatband, MSA696688 that can be used over both sewn in PVC or replaceable foam sweatbands for increased user comfort

Push-key Suspension with Sewn in PVC Sweatband  - Pack of 20

To be used over sewn in PVC sweatband for fas-trac and push-key suspensions

Cleanable Terri Sweatband  - Pack of 10

Black elastic webbing , Good flexibility with the ability to be worn on the top of the helmet when not in use, Used in combination with all MSA European helmets , Pack of 20

2-POINT Elastic Chin Strap  - Pack of 20

Black and White textile polyester interweaved webbing , Adjustable to ensure a good fit, Used in combination with all MSA European helmets , Pack of 20

2-POINT Textile Chin Strap  - Pack of 20

Steel mesh contoured full face visor for a close fit to the fance and provides protection from chips and light debris. Simple push button application to the V-Gard H1 helmet, requiring no additional adapters or frames.

Features and Benefits
• Simple push button application to attach and detach from V-Gard H1 safety helmet
• No additional frames or adapters are required
• Steel mesh construction provides a strong surface whilst still allowing good visibility

V-Gard H1 Full Face Forestry Face Shield, Steel Mesh

V-Gard PC sheet visors reliably protect against impact, splashes and UV radiation. , The visor sides are contoured towards face for a closer fit and improved resistance to impact and splash hazards. , They are the perfect solution for general and basic applications, All V-Gard visors easily fit to V-Gard Browguard, MSA10127061 and on V-Gard frames for allV-Gard helmets. , They can also be worn in combination with helmet mounted ear muffs. For the Non-Chinguard compatible visor options, please see MSA10115836, The dimensions of the visor are 203 x 432mm. The Visor conforms to the following:EN166:2001 Personal Eye Protection (2C-1,2 1B )2C - UV filter with enhanced colour recognition1,2 Clear or amber ocular1 Optical class 1 for permanent usageB Medium energy impact protection (120M/S)

Browse our original MSA products in Eye Protection

We suggest upgrading to Chrome