Brand

Rating

Price

Special Offers

Product Type

Size

Blue Horizons pH Minus granules enables you to reduce your pools pH to the ideal pool pH level, which is between 7.2 - 7.6, promoting bather comfort, optimum chemical efficiency and protection of pool plant equipment. Test the pH of your pool water if it is above 7.6, use pH minus to reduce it. 
 Blue Horizons pH Minus Granules Application Instructions: 1. Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 2.2 gallons (10ls) of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the pool whilst the pump(s) are turned 'on', preferably near to the water inlets to aid distribution. 2. After a minimum of 8 hours, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Please note a number of treatments may be required. 










































|  |
| --- |
|  Blue Horizons pH Minus Granules Dosing Rates  |
|  Water Volumes  |  To Lower pH Levels  |
| Litres | Gallons | Dose Rate |
| 4,545 | 1,000 | 50g |
| 9,090 | 2,000 | 100g |
| 22,700 | 5,000 | 250g |
| 45,450 | 10,000 | 500g |
| 68,175 | 15,000 | 750g |


 Blue Horizons pH Minus Granules General Precautions Dosing - Wear eye and face protection and ensure granules are not blown back into your face. - Never mix with other chemicals including household cleaners, as a dangerous reaction may occur. - When pre-dissolving product always add to water not vice versa. 
 Blue Horizons pH Minus Granules Handling/Storage - Handle products in a well-ventilated area, preferably outdoors. - Wash hands after use. - Ensure chemicals do not become damp in storage - store in a cool dry place. 
 THIS Ph Minus EC Label CONTAINS SODIUM HYDROGEN SULPHATE 231-665-7 
 Blue Horizons pH Minus Granules Risks - Risk of serious damage to eyes. 
 Blue Horizons pH Minus Granules Safety - Keep locked up and out of reach of children. - If swallowed, seek medical advice immediately and show this container or label. - Avoid contact with skin. - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

Blue Horizons Granular Shock Relief Pouches are a calcium hypochlorite granular shock chlorine can be used as part of your winterising programme for your outdoor pool. Now in a convenient 300g pouch, easier to handle. Ideal to control quantity. Granular Shock Chlorine is a highly concentrated chlorine used to shock your swimming pool water on a regular basis, usually this should be done every 2 weeks or more frequently during hot weather, or if your pool water has turned green. Granular Shock Chlorine is very effective at restoring sparkling water from algae infestation. Granular Shock Chlorine can be added through the skimmer. Also use this product if the pool has been neglected or algae growth has appeared on the floors and walls of the pool, or there has been an exceptionally high bather load. Equivalent to Shock Xtra, Rapid Shock. Helps prevent and remove algae. Destroys swimmer wastes. May be used for regular disinfection. pH 11.5. Part of the BOAST system. 
 How to apply chlorine shock granules: 1- Maintain pH levels within the ideal range 7.2 -7.6. If the level is not in this range, adjust. 2- Maintain free chlorine residuals routinely in the 1 -3mg/l (ppm) range. Shock or oxidising procedures are recommended either weekly or fortnightly with a maximum of 10mg/l (ppm) for a full shock treatment. 3- Pre-dissolve this product in a clean plastic container at a maximum rate of 100g of product for 2.2 gallons (10 litres) of water. Stir well to ensure product is fully dissolved. Add the resulting solution to the pool whilst the pump is turned on preferably near the water inlets to aid distribution. 4- Repeat dose/application if necessary to achieve the desired level. 5- After using this product, pool water may become temporarily cloudy, so keep the filtration pump running until it clears. 6- After shock treatment, allow the chlorine to drop below 5mg/l before bathing recommences, and in any event wait for at least 30 minutes! Always test your 
 How to apply chlorine shock granules: 1- Maintain pH levels within the ideal range 7.2 -7.6. If the level is not in this range, adjust. 2- Maintain free chlorine residuals routinely in the 1 -3mg/l (ppm) range. Shock or oxidising procedures are recommended either weekly or fortnightly with a maximum of 10mg/l (ppm) for a full shock treatment. 3- Pre-dissolve this product in a clean plastic container at a maximum rate of 100g of product for 2.2 gallons (10 litres) of water. Stir well to ensure product is fully dissolved. Add the resulting solution to the pool whilst the pump is turned on preferably near the water inlets to aid distribution. 4- Repeat dose/application if necessary to achieve the desired level. 5- After using this product, pool water may become temporarily cloudy, so keep the filtration pump running until it clears. 6- After shock treatment, allow the chlorine to drop below 5mg/l before bathing recommences, and in any event wait for at least 30 minutes! Always test your water AFTER dosing and PRIOR to bathing. 
### Dosing Rates






| Water Volumes |  | To increase Chlorine Level |  |  |
| --- | --- | --- | --- | --- |
| Litres | Gallons | 1 mg/l | 5mg/l | 10mg/l |
| 4,545 | 1,000 | 7g | 35g | 70g |
| 11,360 | 2,500 | 17g | 88g | 175g |
| 22,725 | 5,000 | 35g | 175g | 350g |
| 68,175 | 15,000 | 105g | 525g | 1050g |

Blue Horizons 200g Chlorine Tablets are an easier way of maintaining chlorine levels in your pool water, 200g chlorine tablets are placed in the skimmer, floating dispenser or chlorine feeder (trichlorinator). When dosed via the skimmer the tablet(s) will dissolve slowly over a 3 to 4 day period, the rate at which they dissolve will vary depending upon water flow and temperature. They have a high level of available chlorine and contain chlorine stabiliser. 
 Please refer to the Blue Horizons Pool Care guide for further product information in our downloads section. 
  Blue Horizons 200g Chlorine Tablets Application Instructions: 
  Floating Dispenser: Fill the Trichlor floating dispenser with tablets and adjust the aperture mechanism at the bottom of the dispenser to obtain the 1-3mg/l (ppm) desired range. Alternatively keep the dispenser aperture constant and vary the tablets inside to achieve 1-3mg/l (ppm). The dispenser should be removed from the pool whilst swimmers are bathing. 
  Chlorine Feeders: Fill the dispenser and follow feeder instruction manuals on flow regulation to maintain 1-3 mg/l (ppm) chlorine levels. 
  General precautions:  - Never mix with other chemicals including household cleaners as a dangerous reaction may occur. 
  Handling/Storage: Important - see Risk and Safety phrases below.  - Handle products in a well ventilated area - preferably outdoors.  - Wash hands after use.  - Ensure chemicals do not become damp in storage - store in a cool dry place. 
  Risk:  - Contact with combustible material may cause fire.  - Harmful if swallowed.  - Contact with acid liberates toxic gas.  - Irritating to eyes and respiratory system.  - Very toxic to aquatic organisms, may cause long term adverse effects in the aquatic environment. 
  Safety:  - Use Biocides safely. Always read the label and product information before use.  - Keep locked up and out of reach of children.  - Keep containers dry.  - If swallowed, seek medical advise immediately and show this container or label.  - In case of contact with eyes, rinse immediately with plenty of water and seek medical attention.  - In case of fire or explosion, do not breath fumes.  - Avoid releases to the environment.  - Refer to special instructions and safety data sheet.  - This material and/or container must be disposed of as a hazardous waste.  - Handle products in a well-ventilated area, preferably outdoors.  - Wash hands after use.  - Ensure chemicals do not become damp in storage - store in a cool dry place.

Large Chlorine 200g Tablets 5kg 5kg

Blue Horizons Granular Shock Chlorine is a calcium hypochlorite granular shock chlorine can be used as part of your winterising programme for your outdoor pool. Granular Shock Chlorine is a highly concentrated chlorine used to shock your swimming pool water on a regular basis, usually this should be done every 2 weeks or more frequently during hot weather, or if your pool water has turned green. Granular Shock Chlorine is very effective at restoring sparkling water from algae infestation. Granular Shock Chlorine can be added through the skimmer. Also use this product if the pool has been neglected or algae growth has appeared on the floors and walls of the pool, or there has been an exceptionally high bather load. Equivalent to Shock Xtra, Rapid Shock. Helps prevent and remove algae. Destroys swimmer wastes. May be used for regular disinfection. pH 11.5. Part of the BOAST system. 
 How to apply chlorine shock granules: 1- Maintain pH levels within the ideal range 7.2 -7.6. If the level is not in this range, adjust. 2- Maintain free chlorine residuals routinely in the 1 -3mg/l (ppm) range. Shock or oxidising procedures are recommended either weekly or fortnightly with a maximum of 10mg/l (ppm) for a full shock treatment. 3- Pre-dissolve this product in a clean plastic container at a maximum rate of 100g of product for 2.2 gallons (10 litres) of water. Stir well to ensure product is fully dissolved. Add the resulting solution to the pool whilst the pump is turned on preferably near the water inlets to aid distribution. 4- Repeat dose/application if necessary to achieve the desired level. 5- After using this product, pool water may become temporarily cloudy, so keep the filtration pump running until it clears. 6- After shock treatment, allow the chlorine to drop below 5mg/l before bathing recommences, and in any event wait for at least 30 minutes! Always test your water AFTER dosing and PRIOR to bathing. 
### Dosing Rates






| Water Volumes |  | To increase Chlorine Level |  |  |
| --- | --- | --- | --- | --- |
| Litres | Gallons | 1 mg/l | 5mg/l | 10mg/l |
| 4,545 | 1,000 | 7g | 35g | 70g |
| 11,360 | 2,500 | 17g | 88g | 175g |
| 22,725 | 5,000 | 35g | 175g | 350g |
| 68,175 | 15,000 | 105g | 525g | 1050g |

Granular Shock Chlorine 5kg

Blue Horizons Granular Floc sink unwanted debris to the pool floor creating clear sparkling water. Once the particles have settled on the pool floor they should be vacuumed to waste. This product should only be used in pools with sand filtration.
Instructions

Maintain pH levels within the ideal range 7.2–7.6. If the level is not in this range, adjust.
Maintain total alkalinity within the ideal range of 80–150mg/l(ppm).If the level is not in this range, adjust.
Maintain chlorine levels within the ideal range 1–3mg/l(ppm). If the level is not in this range, adjust.
Pre-dissolve this product in a clean plastic container at a maximum rate of 100g of product per 2.2 gallon (10 litres) of clean warm water. Stir well to ensure product is fully dissolved. Add the resulting solution evenly over the whole water surface with the filtration in recirculation mode (not filtration).
Run filtration in recirculation mode for 30 minutes then turn pump off.
Keep filtration off and leave the pool undisturbed for 12–24 hours to allow debris to settle to the bottom of the pool.
Carefully vacuum settled debris to waste.

Granular Floc 2 kg - BWP246-2

Blue Horizons Algae Controller contains Miristalkonium Chloride and Benzododecinium Chloride.
 
 
  Blue Horizons Algae Controller is designed to be used on a regular basis. Blue Horizons Algae Controller should be used regularly to prevent Algae growth
  in your swimming pool.
 
 
  Blue Horizons Algae Controller is complementary to most swimming pool sanitisers. Blue Horizons Algae Controller should be used to prevent pool water from
  turning green.
 
 
  Prevents and treats Algae.
 
 
  Fast acting. Part of the BOAST system.

Algae Controller 2 Litre 2 Litre

Kibbled Aluminium Sulphate sinks unwanted debris to the pool floor creating clear sparkling water. Once the particles have settled on the pool floor they should be vacuumed to waste. Alternatively, dose pre-filter via a tank and pump system to improve filter efficiency. This product should only be used in pools with sand filtration. . Kibbled Aluminium Sulphate, commonly known as alum is a hard crystalline solid or powder that is soluble in water. It contains around 17% alumina (Al2O3). It is manufactured in a simple process from aluminium trihydrate and sulphuric acid. 
  Kibbled Aluminium Sulphate Uses: - Kibbled Aluminium Sulphate is used in water purification. As a mordant in dyeing and printing textiles. In water purification, it causes impurities to coagulate which are removed as the particulate settles to the bottom of the container or more easily filtered. - Kibbled Aluminium Sulphate is sometimes used to reduce the pH of garden soil. The gardener can add Aluminum sulfate to the soil to reduce the pH level which in turn will result in the flowers of the Hydrangea turning a different color (see below). - Kibbled Aluminium Sulphate is the active ingredient of some antiperspirants. - In construction industry it is used as waterproofing agent and accelerator in concrete. - In paper making the alum reacts with rosin sizes of various types, helping to attach the newly formed rosin aluminates to fibres. Sizing makes the paper water resistant. - It is also used in styptic pencils. - It can also be very effective as a molluscide, killing spanish slugs. Kibbled Aluminium Sulphate is considered to be a relatively environmentally friendly treatment for slugs compared to the more toxic conventional products like metaldehyde.(See below - How to use Kibbled Aluminium Sulphate to kill slugs)

Kibbled Aluminium Sulphate 25kg 25kg

AquaSparkle Spa TA Plus is a measurement of the waters ability to resist pH change. If the total alkalinity is low then the pH can fluctuate making it difficult to control and maintain at the ideal level. If the total alkalinity is high then the pH can be difficult to change and will keep rising. 
 A high total alkalinity can also lead to the formation of a bicarbonate scale on spa surfaces, within pipework and support equipment. 
 If the total alkalinity of your spa water is below 80mg/l it should be increased using AquaSparkle Spa T.A. Plus, the table below indicates the dosage quantities required: 
  AquaSparkle Spa TA Plus Dose Rates: To Increase TA in 1,000 Litres by 10mg/l requires 18g of TA Plus To Increase TA in 1,000 Litres by 25mg/l requires 45g of TA Plus To Increase TA in 1,000 Litres by 50mg/l requires 90g of TA Plus 
 If the total alkalinity of your spa water is above 150mg/l then AquaSPArkle Spa pH Minus can be used to lower it. When applying Spa pH Minus to lower total alkalinity levels, the product should be predissolved and then ‘slug’ dosed (dumped) into one area of the spa. The dose rates are indicated below: 
  AquaSparkle Spa TA Plus Dose Rates: To reduce TA in 1,000 Litres by 10mg/l requires 24g of pH Minus granules. To reduce TA in 1,000 Litres by 25mg/l requires 60g of pH Minus granules. To reduce TA in 1,000 Litres by 50mg/l requires 120g of pH Minus granules.

Aquasparkle Spa TA Plus 1kg 1kg

Blue Horizons Chlorine Reducer can be used to lower Chlorine or Bromine levels in swimming pool water after shock treatment procedures or as a problem solver if the pool has been accidentally 'overdosed' with chlorine or bromine. 
 Blue Horizons Chlorine Reducer Application Instructions: 1 - Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 2.2 gallons (10 litres) of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the pool whilst the pump(s) are turned "on", preferably near to the water inlets to aid distribution. 2 - If applying after shock treatment, allow a minimum of 8 hours for shock chlorination to oxidise swimmer wastes from water before application. 3 - Measure the free chlorine/total bromine level in the water, then using the dosing table below, calculate the total amount required. 4 - Split this total amount into 4 smaller doses. Apply each 1/4 dose, allowing time to thoroughly circulate (2-3 hours for commercial pools, 6-8 hours for domestic pools) before re-testing chlorine/bromine level and if necessary adding further doses. 






















































| |
| --- |
| Chlorine Reducer Dosing Rates |
| Water Volumes | To lower Pool Chlorine Level by |
| Litres | Gallons | 1mg/L (1ppm) | 2mg/L (2ppm) | 3mg/L (3ppm) |
| 4,545 | 1,000 | 23g | 46g | 114g |
| 9,090 | 2,000 | 45g | 91g | 227g |
| 22,700 | 5,000 | 114g | 228g | 568g |
| 45,450 | 10,000 | 227g | 454g | 1.14kg |
| 68,175 | 15,000 | 341g | 682g | 1.7kg |


 Blue Horizons Chlorine Reducer General Precautions: Dosing: - Wear eye and face protection and ensure granules are not blown back into your face. - Never mix with any other chemicals including cleaning products and chlorine products, as a dangerous reaction will occur. - Do not pour this product into a pool skimmer basket containing chlorine tablets or any other product. - When pre-dissolving product always add product to water not the other way round. 
 Blue Horizons Chlorine ReducerHandling & Storage: - Handle products in a well-ventilated area, preferably outdoors. - Wash hands after use. - Ensure chemicals do not become damp in storage - store in a cool dry place. - For Further information please see the product brochure under the download tab

Chlorine Reducer 1kg 1kg

Blue Horizons pH plus granules enables you to increase your pools pH to the ideal pool pH level, which is between 7.2 - 7.6, promoting bather comfort, optimum chemical efficiency and protection of pool plant equipment. 
 Test the pH of your pool water if it is below 7.2, use pH Plus to raise it. 
 Blue Horizons pH Plus Granules Application Instructions: 1. Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 2.2 gallons (10ls) of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the pool whilst the pump(s) are turned 'on', preferably near to the water inlets to aid distribution. 2. After a minimum of 8 hours, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Please note a number of treatments may be required. 










































|  |
| --- |
|  Dosing Rates  |
|  Water Volumes  |  To Increase pH Levels  |
| Litres | Gallons | Dose Rate |
| 4,545 | 1,000 | 50g |
| 9,090 | 2,000 | 100g |
| 22,700 | 5,000 | 250g |
| 45,450 | 10,000 | 500g |
| 68,175 | 15,000 | 750g |


 Blue Horizons pH Plus Granules General Precautions Dosing - Wear eye and face protection and ensure granules are not blown back into your face. - Never mix with other chemicals including household cleaners and, as a dangerous reaction may occur. - When pre-dissolving product always add to water not vice versa. 
 Blue Horizons pH Plus Granules Handling/Storage - Handle products in a well-ventilated area, preferably outdoors. - Wash hands after use. - Ensure chemicals do not become damp in storage - store in a cool dry place. 
 THIS pH PLUS CONTAINS SODIUM CARBONATE EC Label 207-838-8 
 Blue Horizons pH Plus Granules Risks - Irritating to eyes. 
 Blue Horizons pH Plus Granules Safety - Keep locked up and out of reach of children. - Do not breath in dust. - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

PH Plus Granules 5kg 5kg

Blue Horizons Ultimate Winter Time Algaecide is a Non copper based  (Copper Free) long life algaecide with sequesterant, for the control of
  most types of algae, together with the prevention of staining and scale formation.
 
 
  Blue Horizons Ultimate Winter Time Algaecide should be applied to a Swimming Pool prior to a winter close-down.
 
 
  The concentrated formula treats up to 15,000 gallons and also contains a built-in scale and stain inhibitor. Compatible with Chlorine, Bromine and
  Biguanide treated Swimming Pools.
 
 
  Blue Horizons Ultimate Winter Time Algaecide is tolerant to pH range fluctuation.
 
 
  Winterising with longer lasting algaecide products.

Ultimate Winter Time Algaecide 5 Litre 5 Litre

Blue Horizons JellyClear Cubes are clarification gel blocks offered in single use JellyClear Cube presentation pack. The JellyClear Cube improve filtration efficiency by coagulating debris and "tightening" the filter bed. Easy and safe to use in skimmers or weirs, each gel block treats up to 50,000 litres (11,000 gallons) for up to 2 weeks. Please refer to the Blue Horizons Pool Care guide for further product information in our downloads section. 
 JellyClear Cubes Application Instructions: 
 
 Ensure algae is pre-treated (previous 24 hours) to release algae from walls, prior to using JellyClear Cubes. Adjust pH to desired range of 7.2 - 7.6. 
 Backwash the filter (or clean the cartridge) and then return to the normal filtration setting prior to use. 
 Peel off the protective plastic film and insert the JellyClear Cubes direclty into the pump strainer basket OR the skimmer/weir basket. 
 JellyClear Cubes will dissolve over a period of 3 - 4 days depending on water flow from the filtration cycle. However, this duration cycle is not significant as the active ingredients have a long lasting residual effect beyond thier disappearance.

Jelly Clear Cubes Flocculent 70g 70g

Blue Horizons Flockfix Cartridges are designed to assist the filter in removing small suspended particles to ensure sparkling clear water. They can also help remove copper, iron & manganese from pool water. 
 Blue Horizons Flockfix Cartridges Application Instructions: 1. Maintain pH levels within the ideal range 7.2 - 7.6. Adjust if necessary. 2. Maintain total alkalinity within the ideal range of 80 - 150 mg/l (ppm). Adjust if necessary. 3. Maintain chlorine levels within the ideal range 1 - 3 mg/l (ppm). Adjust if necessary. 4. Backwash the filter and then return to the normal filtration setting prior to use. 5. Ensure the skimmer basket is clean and free of any other chemicals. 6. Add 1 cartridge per 50,000ltrs (11,000 gallons) of pool water per week. 
 Blue Horizons Flockfix Cartridges General Precautions: - Never mix with any other chemicals including cleaning products and chlorine products, as a dangerous reaction may occur. 
 Blue Horizons Flockfix CartridgesHandling/Storage: - Important - See risk and safety phrases below. - Handle products in a well-ventilated area, preferably outdoors. - Wash hands after use. - Ensure chemicals do not become damp in storage - store in a cool dry place. 
 BLUE HORIZON FLOCKFIX CARTRIDGES CONTAIN ALUMINIUM SULPHATE 
 Risks: - Irritating to eyes, respiratory systems and skin. 
 Safety: - Keep locked up and out of reach of children. - In case of contact with eyes, rinse immediately with plenty of water. - After contact with skin, wash immediately with plenty of water. - Wear suitable gloves and eye/face protection.

Flockfix Cartridges 125g 8X125G

Blue Horizons Aqua Sparkle Flocculant 50g Floc Tablet 500g are easy to use 50g floc tablets should be applied weekly to prevent hazy water or alternatively if water clarity is poor. Use with sand filters only and apply via a clean and empty skimmer basket. Aqua Sparkle Tablets work in conjunction with the sand filter to remove fine particles from the pool, helping you achieve crystal clear water. 
  Blue Horizons Aqua Sparkle Flocculant 50g Floc Tablet 500g Instructions  - Maintain pH levels within the ideal range 7.2–7.6. Adjust if necessary.  - Maintain total alkalinity within the ideal range of 80–150mg/l(ppm). Adjust if necessary.  - Maintain chlorine levels within the ideal range 1–3mg/l(ppm). Adjust if necessary.  - Backwash the filter and then return to the normal filtration setting prior to use.  - Ensure the skimmer basket is clean and free of any other chemicals.  - Add 1 tablet per 40,900 ltrs (9,000gallons) of pool water per week. 
 This is a 500g Tub (10x50g).

Aqua Sparkle Flocculant 50g Floc Tablet 500g 500g

Aquasparkle Spa Sparkle is used to add lustre and clarity to Hot Tub and Spa water. Ideal for use with cartridge filter pumps as on most above ground pools and spas. Cloudy water is caused by non filterable waste particles that are too small for the filter to remove. Spa Sparkle combines together fine particles of dust in your water making the particles bigger and easier for the filter to trap, resulting in clear water. 
 Aquasparkle Spa Sparkle Features & Benefits - 1 Litre of High Quality Spa Sparkle Clarifier from AquaSparkle - For adding lustre and clarity to spa water. - Hgihly effective water polisher. - Add directly to your hot tub water. - For a 1,000 litre tub, add 50ml initial dose and you can top up weekly with 25ml per week. 
 Aquasparkle Spa Sparkle Application Instructions 1. Apply this product directly to your spa water whilst the spa pump(s) are turned ‘on’ to aid distribution. 2. Spas treated for murky water may require cartridges to be cleaned a week after treatment. 3. When Spas become saturated with dissolved solids (TDS) then AquaSPArkle Spa Sparkle may become less effective. At this stage the spa water should be changed. 
 Always read the instructions on the container prior to use. 
 FAQ's  *Is this all I need to keep my spa clean?* No, You will require a sanitiser (chlorine/bromine) to keep your spa free of bacteria, this product simply adds clarity to water if all other levels are ok.  *Will this product affect my Chlorine / Bromine level?* No, It is a neutral chemical, so your Chlorine / Bromine level will be unaffected in your Hot Tub  *Will this work in my pool?*  No, This product is designed more for hot tubs, please see our pool clarifiers.  *My Hot Tub is Green/Cloudy, Will this clear the water?*  No, This product is only for adding clarity, you would need a shock treatment.

Aquasparkle Spa Sparkle 1 Litre 1 Litre

Blue Horizons Multifunctional 200g Chlorine Tablets a new and improved version of the Maxi-Tab, these tablets still offer an easier way of maintaining chlorine levels and are applied via the skimmer, floating dispenser or chlorine feeder (trichlorinator). They have a higher pH value, which reduces the amount of pH regulation you need to do and as well as being stabilised to reduce chlorine loss to sunlight they also contain clarifier and algaecides to help improve clarity and prevent algae formation. When dosed via the skimmer the tablet(s) will dissolve slowly over a 3 to 4 day period, the rate at which they dissolve will vary depending upon water flow and temperature. They have a high level of available chlorine and contain chlorine stabiliser. 
 Please refer to the Blue Horizons Pool Care guide for further product information in our downloads section. 
  Floating Dispenser: Fill the Trichlor floating dispenser with tablets and adjust the aperture mechanism at the bottom of the dispenser to obtain the 1-3mg/l (ppm) desired range. Alternatively keep the dispenser aperture constant and vary the tablets inside to achieve 1-3mg/l (ppm). The dispenser should be removed from the pool whilst swimmers are bathing. 
  Chlorine Feeders: Fill the dispenser and follow feeder instruction manuals on flow regulation to maintain 1-3 mg/l (ppm) chlorine levels. 
  General precautions:  - Never mix with other chemicals including household cleaners as a dangerous reaction may occur. 
  Handling/Storage: Important - see Risk and Safety phrases below.  - Handle products in a well ventilated area - preferably outdoors.  - Wash hands after use.  - Ensure chemicals do not become damp in storage - store in a cool dry place. 
  Risk:  - Contact with combustible material may cause fire.  - Harmful if swallowed.  - Contact with acid liberates toxic gas.  - Irritating to eyes and respiratory system.  - Very toxic to aquatic organisms, may cause long term adverse effects in the aquatic environment. 
  Safety:  - Use Biocides safely. Always read the label and product information before use.  - Keep locked up and out of reach of children.  - Keep containers dry.  - If swallowed, seek medical advise immediately and show this container or label.  - In case of contact with eyes, rinse immediately with plenty of water and seek medical attention.  - In case of fire or explosion, do not breath fumes.  - Avoid releases to the environment.  - Refer to special instructions and safety data sheet.  - This material and/or container must be disposed of as a hazardous waste.  - Handle products in a well-ventilated area, preferably outdoors.  - Wash hands after use.  - Ensure chemicals do not become damp in storage - store in a cool dry place.

Multi-functional Chlorine 200g Tablets 5kg 5kg

Blue Horizons pH Minus granules enables you to reduce your pools pH to the ideal pool pH level, which is between 7.2 - 7.6, promoting bather comfort, optimum chemical efficiency and protection of pool plant equipment. Test the pH of your pool water if it is above 7.6, use pH minus to reduce it. 
 Blue Horizons pH Minus Granules Application Instructions: 1. Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 2.2 gallons (10ls) of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the pool whilst the pump(s) are turned 'on', preferably near to the water inlets to aid distribution. 2. After a minimum of 8 hours, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Please note a number of treatments may be required. 










































|  |
| --- |
|  Blue Horizons pH Minus Granules Dosing Rates  |
|  Water Volumes  |  To Lower pH Levels  |
| Litres | Gallons | Dose Rate |
| 4,545 | 1,000 | 50g |
| 9,090 | 2,000 | 100g |
| 22,700 | 5,000 | 250g |
| 45,450 | 10,000 | 500g |
| 68,175 | 15,000 | 750g |


 Blue Horizons pH Minus Granules General Precautions Dosing - Wear eye and face protection and ensure granules are not blown back into your face. - Never mix with other chemicals including household cleaners, as a dangerous reaction may occur. - When pre-dissolving product always add to water not vice versa. 
 Blue Horizons pH Minus Granules Handling/Storage - Handle products in a well-ventilated area, preferably outdoors. - Wash hands after use. - Ensure chemicals do not become damp in storage - store in a cool dry place. 
 THIS Ph Minus EC Label CONTAINS SODIUM HYDROGEN SULPHATE 231-665-7 
 Blue Horizons pH Minus Granules Risks - Risk of serious damage to eyes. 
 Blue Horizons pH Minus Granules Safety - Keep locked up and out of reach of children. - If swallowed, seek medical advice immediately and show this container or label. - Avoid contact with skin. - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

PH Minus 7kg 7kg

Blue Horizons Chlorine Stabiliser Granules is a traditional, granular chlorine donor that is still popular with many pool owners that like dose rate flexibility. These granules are rapid dissolving making prep-dissolving and application easy. The granules have a pH value of about 6.0 - 7.0, which is fairly close to the ideal pool water pH level and so will have little effect on the pH level of your pool water. Another feature of Stabilised Chlorine Granules is that they contain Cyanuric acid (chlorine stabiliser), this can be beneficial for outdoor pools as it reduces the amount of chlorine lost to sunlight - making it easier for you to maintain the correct chlorine level in your pool. Please refer to the Blue Horizons Pool Care guide for further product information in our downloads section. 
 Blue Horizons Rapid Dissolving Chlorine Stabiliser Granules Application Instructions: 1. Maintain pH levels within the ideal range of 7.2 - 7.6. If the level is not in this range, adjust accordingly. 2. Maintain free chlorine residuals routinely in the 1 - 3 mg/l (ppm) range. Shock or oxidising procedures are recommended either weekly or fortnightly with a maximum of 10mg/l (10ppm) for a full shock treatment. 3. Pre-dissolve this product in a clean plastic container at a maximum rate of 100g of product per 2.2 gallons ( 10 litres) of water. Stir well to ensure product is fully dissolved. Add the resulting solution to the pool whilst the pump is turned ON preferably near the water inlets to aid distribution. 4. Repeat dose/application if necessary to achieve the desired level. 5. After using this product, pool water may become temporarily cloudy, so keep the filtration pump running until it clears. 6. After shock treatment procedures allow the chlorine to drop below 5ppm before bathing recommences and in any event wait for at least 30 minutes before bathing recommences. 
 















































| |
| --- |
| Stabilised Chlorine Granules Dosing Rates |
| Water Volumes | To Increase Pool Chlorine Level by |
| Litres | Gallons | 1mg/L (1ppm) | 2mg/L (2ppm) | 3mg/L (3ppm) |
| 4,545 | 1,000 | 8g | 16g | 24g |
| 11,360 | 2,500 | 21g | 42g | 63g |
| 22,700 | 5,000 | 41g | 82g | 123g |
| 45,450 | 10,000 | 83g | 166g | 249g |


 Blue Horizons Rapid Dissolving Chlorine Stabiliser Granules General Precautions: Dosing: - Wear eye and face protection and ensure granules are not blown back into your face. - Never mix with any other chemicals including cleaning products and chlorine products, as a dangerous reaction will occur. - Do not pour this product into a pool skimmer basket containing chlorine tablets or any other product. - When pre-dissolving product always add product to water not the other way round. 
 Blue Horizons Rapid Dissolving Chlorine Stabiliser Granules Handling & Storage: - Handle products in a well-ventilated area, preferably outdoors. - Wash hands after use. - Ensure chemicals do not become damp in storage - store in a cool dry place. 
 THIS STABILISED CHLORINE GRANULES CONTAIN TROCLOSENE SODIUM, DIHYDRATE - EC Label 220-767-7 
 Blue Horizons Rapid Dissolving Chlorine Stabiliser Granules Risk - Harmful if swallowed. - Contact with acids liberates toxic gas. - May cause sensitisation by inhalation and skin contact. - Very toxic to aquatic organisms, may cause long term adverse effects in the aquatic environment. 
 Blue Horizons Rapid Dissolving Chlorine Stabiliser Granules Safety - Use Biocides safely. Always read the label and product information before use. - Keep locked up and out of reach of children. - If swallowed, seek medical advice immediately and show this container or label. - Keep container dry. - Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advise. - In case of fire and/or explosion, do not breath fumes. - This material and/or its container must be disposed of as hazardous waste. - Avoid release to the environment. - Refer to special instructions/safety data sheet.

Chlorine Stabiliser Granules 2kg 2kg

Blue Horizons Rapid Shock Chlorine qucik action dose of chlorine, faster acting than the traditional granular shock. 
  Key Features/Characteristics - Helps prevent/remove algae - Destroys swimmer wastes - Rapid Dissolving - pH 11.5 - Part of the BOAST System 
  Application Instructions 
 
 Maintain pH levels within the ideal range 7.2 – 7.6. If the level is not in this range, adjust. 
 Maintain free chlorine residuals routinely in the 1 – 3mg/l (ppm) range. Shock or oxidising procedures are recommended either weekly or fortnightly with a maximum of 10mg/l (ppm) for a full shock treatment. 
 If the water temperature is 20oC or higher and water depth at least 4ft deep, this product can be carefully broadcast directly over the pool surface. Always check the wind direction before broadcasting. Alternatively, pre-dissolve this product in a clean plastic container at a maximum rate of 100g of product of 2.2 gallon (10 litres) in water. Stir well to ensure product is fully dissolved. Add the resulting solution to the pool whilst the pump (s) are turned ‘on' preferably near the water inlets to aid distribution. 
 Repeat dose/application if necessary to achieve the desired level. 
 After using this product pool water may become temporarily cloudy, so keep the filtration pump running until it clears. 
 After shock treatment, allow the chlorine to drop below 5mg/l before bathing recommences, and in any event wait for at least 30 minutes before bathing recommences. 


Rapid Shock Chlorine 5kg 5kg

Blue Horizons Granular Shock Relief Pouches are a calcium hypochlorite granular shock chlorine can be used as part of your winterising programme for your outdoor pool. Now in a convenient 300g pouch, easier to handle. Ideal to control quantity. Granular Shock Chlorine is a highly concentrated chlorine used to shock your swimming pool water on a regular basis, usually this should be done every 2 weeks or more frequently during hot weather, or if your pool water has turned green. Granular Shock Chlorine is very effective at restoring sparkling water from algae infestation. Granular Shock Chlorine can be added through the skimmer. Also use this product if the pool has been neglected or algae growth has appeared on the floors and walls of the pool, or there has been an exceptionally high bather load. Equivalent to Shock Xtra, Rapid Shock. Helps prevent and remove algae. Destroys swimmer wastes. May be used for regular disinfection. pH 11.5. Part of the BOAST system. 
 How to apply chlorine shock granules: 1- Maintain pH levels within the ideal range 7.2 -7.6. If the level is not in this range, adjust. 2- Maintain free chlorine residuals routinely in the 1 -3mg/l (ppm) range. Shock or oxidising procedures are recommended either weekly or fortnightly with a maximum of 10mg/l (ppm) for a full shock treatment. 3- Pre-dissolve this product in a clean plastic container at a maximum rate of 100g of product for 2.2 gallons (10 litres) of water. Stir well to ensure product is fully dissolved. Add the resulting solution to the pool whilst the pump is turned on preferably near the water inlets to aid distribution. 4- Repeat dose/application if necessary to achieve the desired level. 5- After using this product, pool water may become temporarily cloudy, so keep the filtration pump running until it clears. 6- After shock treatment, allow the chlorine to drop below 5mg/l before bathing recommences, and in any event wait for at least 30 minutes! Always test your 
 How to apply chlorine shock granules: 1- Maintain pH levels within the ideal range 7.2 -7.6. If the level is not in this range, adjust. 2- Maintain free chlorine residuals routinely in the 1 -3mg/l (ppm) range. Shock or oxidising procedures are recommended either weekly or fortnightly with a maximum of 10mg/l (ppm) for a full shock treatment. 3- Pre-dissolve this product in a clean plastic container at a maximum rate of 100g of product for 2.2 gallons (10 litres) of water. Stir well to ensure product is fully dissolved. Add the resulting solution to the pool whilst the pump is turned on preferably near the water inlets to aid distribution. 4- Repeat dose/application if necessary to achieve the desired level. 5- After using this product, pool water may become temporarily cloudy, so keep the filtration pump running until it clears. 6- After shock treatment, allow the chlorine to drop below 5mg/l before bathing recommences, and in any event wait for at least 30 minutes! Always test your water AFTER dosing and PRIOR to bathing. 
### Dosing Rates






| Water Volumes |  | To increase Chlorine Level |  |  |
| --- | --- | --- | --- | --- |
| Litres | Gallons | 1 mg/l | 5mg/l | 10mg/l |
| 4,545 | 1,000 | 7g | 35g | 70g |
| 11,360 | 2,500 | 17g | 88g | 175g |
| 22,725 | 5,000 | 35g | 175g | 350g |
| 68,175 | 15,000 | 105g | 525g | 1050g |

Granular Shock Relief Pouch 16 x 300g 4.8kg

Blue Horizons Heavy Duty Clarifieris an effective cationic based water polisher that collects small particles together for more effective removal by the
  filter

Heavy Duty Clarifier 2 Litre 2 Litre

Blue Horizons Waterline Cleaning Paste is a superb blend presented in a pot with sponge applicator for stubborn dirt and grease removal. It is a highly effective cleaning paste used to clean body oils, fats and grease that form tide marks around waterlines. Waterline cleaning paste can be used on concrete, tiled, fibreglass and vinyl liner pool surfaces. 
  Blue Horizons Waterline Cleaning Paste 350g Application Instructions: 1 - Lower the pool water level to expose the area to be cleaned. 2 - Use protective gloves and apply waterline cleaning paste using a suitable soft clean sponge (as provided) or brush or cloth. Wet the applicator before using the paste. 3 - Apply to the area to be cleaned and wait for at least 2 minutes (this compound adheres to wall surfaces), then gently rub to clean. 4 - Wash down cleaned surface area after use, with water. 
 Please refer to the Blue Horizons Pool Care guide for further product information in our downloads section. 
   Blue Horizons Waterline Cleaning Paste 350g General Precautions: - Dosing: - Never mix with other chemicals including household cleaners as a dangerous reaction may occur. 
  Blue Horizons Waterline Cleaning Paste 350g Handling/storage: - Important - See risk and safety phrases. - Wash hands after use. - Ensure chemicals do not become damp in storage - store in a cool dry place. 
 BLUE HORIZONS WATERLINE CLEANING PASTE CONTAINS - AQUEOUS MINERAL IMPREGNATED SOAP AND DETERGENT BLEND - CLASSIFIED AS NON HAZARDOUS. 
  Blue Horizons Waterline Cleaning Paste 350g Risk: - Irritating to skin. 
  Blue Horizons Waterline Cleaning Paste 350g Safety: - Keep locked up and out of reach of children. - Avoid contact with skin and eyes. - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. - After contact with skin, wash immediately with plenty of water. Seek medical advice if irritation occurs.

Waterline Cleaning Paste 350g

Blue Horizons Tile & Liner Cleaner 2 Litre is a liquid blended cleaning agent ideal for application to waterline using a soft cleaning cloth or sponge. 
  Blue Horizons Tile & Liner Cleaner Application Instructions: IMPORTANT - ALWAYS WEAR RUBBER GLOVES AND EYE PROTECTION WHEN USING THIS PRODUCT. 
 1 - Always test a small area of the pool surface to ensure compatibility before treating the whole pool. 2 - Wet the area to be treated using pool water. 3 - Apply tile & liner cleaner using a cloth or sponge to the area to be cleaned. 4 - Gently work tile & liner cleaner onto the waterline to remove any staining. 5 - Wash down cleaned surface area after use, with pool water. 
 Please refer to the Blue Horizons Pool Care guide for further product information in our downloads section. 
  Blue Horizons Tile & Liner Cleaner General Precautions: Dosing: Never mix with other chemicals including household cleaners as a dangerous reaction may occur. - Handling/storage: - Important - See risk and safety phrases. - Wash hands after use. - Ensure lid is replaced and sealed after use. - Store in a cool dry place. 
 BLUE HORIZONS WATERLINE CLEANING PASTE CONTAINS - PHOSPHORIC ACID- CLASSIFIED AS IRRITANT. 
  Blue Horizons Tile & Liner Cleaner Risk: Irritating to eyes and skin. 
  Blue Horizons Tile & Liner Cleaner Safety: - Keep locked up and out of reach of children. - Avoid contact with skin and eyes. - If swallowed, seek medical advice. - Wear suitabel protective clothing, gloves and eye/face protection. - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. - After contact with skin, wash immediately with plenty of water. Seek medical advice if irritation occurs.

Tile & Liner Cleaner 2 Litre 2 Litre

Blue Horizons 4-Way Chlorine test strips provide a quick and easy way to test your swimming pool water. They offer tests for free chlorine, pH and total alkalinity. Simply dip the strip in the water and remove immediately. Hold horizontally for 10 seconds (do not shake excess water from the strip), then compare pH, free chlorine, and total alkalinity (in that order) against the colour chart on the test strip bottle.

4-WAY Chlorine & Bromine Test Strips 50 Strips

Blue Horizons Ultimate Multifunctional Floating Dispenser 1500g is perfect for large above ground pools or in-ground swimming pools. Specifically recommended for pools between 5,000 gallons (22,700 litres) and 15,000 gallons (68,175 litres). As a guide, an 18ft round pool that is 48 inches deep contains 4661 Gallons (21,182 litres). The dispenser comes fully loaded with chlorine - so there is no need to touch any chemicals in the process, simply place into your swimming pool and let the dispenser do the work! 
  Comes loaded with:  - Sanitiser (Chlorine), to keep the water disinfected from bacteria.  - Clarifier, to keep the water sparkling clean and improve water clarity.  - Algaecide, to prevent algae in the long term, alongside the sanitiser.  - Sun Stabiliser, to protect sanitiser (chlorine) levels from the sun. 
  Feactures  - Blue Horizons Fully Loaded Floating Chlorine Dispenser 1.5kg for Swimming Pools  - Recommended for pools between 5,000 gallons (22,700 litres) and 15,000 gallons (68,175 litres).  - The built in chlorine slowly erodes over a period of 3-5 weeks.  - See 'directions for use' for more detailed usage guidance. 
  Diirections of Use: Prior to using this product, ensure PH level is in the ideal range of 7.2 to 7.6. You may need to shock dose before use to establish a chlorine level in the water quickly. You can use Sodium Hypochlorite (liquid chlorine) or Calcium Hypochlorite to achieve this.  Ideal for pools up to 5,000 gallons (22,700 Litres). Remove the two perforated sections of the label marked with 'tear here' and also remove the two security seals. To choose your setting and therefore the rate that the dispenser will dissolve in the pool. As a guide (only) use the x small setting for pools up to 3,000 gallons and small setting for pools above 3,000 gallons. If Free Chlorine levels are outside the desired 1-3mg/l (ppm) range - either too high or too low then adjust the base to expose to more chlorine or less. This is only a guide, as a number of factors affect chlorine level including bather load, weather, rain etc.  Place the dispenser in an upright position in the pool and hold for a few seconds until the cartridge fills with water then release to float on the pool surface. Do not submerge the dispenser completely or block the vent holes. The dispenser will tip over when spent. A tilting dispenser at a 45 degree angle is an indication of imminent replacement required and sanitiser output diminishing. When removing the spent dispenser, cut open the base and place remianing tablets in the weir or skimmer basket. 
 Blue Horizons Ultimate Multifunctional Floating Dispenser  General Precautions Dosing - Wear eye and face protection and ensure granules are not blown back into your face. - Never mix with other chemicals including household cleaners as a dangerous reaction may occur. - When pre-dissolving always add product to water and not vice versa. 
  Handling/Storage - Handle products in a well ventilated area - preferably outdoors. - Wash hands after use. - Ensure chemicals do not become damp in storage - store in a cool dry place.

Ultimate Multi-functional Floating Dispenser 1500g Each

Blue Horizons pH Minus granules enables you to reduce your pools pH to the ideal pool pH level, which is between 7.2 - 7.6, promoting bather comfort, optimum chemical efficiency and protection of pool plant equipment. Test the pH of your pool water if it is above 7.6, use pH minus to reduce it.
Blue Horizons pH Minus Granules Application Instructions:1. Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 2.2 gallons (10ls) of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the pool whilst the pump(s) are turned 'on', preferably near to the water inlets to aid distribution.2. After a minimum of 8 hours, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Please note a number of treatments may be required.
Blue Horizons pH Minus Granules General PrecautionsDosing - Wear eye and face protection and ensure granules are not blown back into your face. - Never mix with other chemicals including household cleaners, as a dangerousreaction may occur. - When pre-dissolving product always add to water not vice versa.
Blue Horizons pH Minus Granules Handling/Storage - Handle products in a well-ventilated area, preferably outdoors. - Wash hands after use. - Ensure chemicals do not become damp in storage - store in a cool dry place.
THIS Ph Minus EC Label CONTAINS SODIUM HYDROGEN SULPHATE 231-665-7
Blue Horizons pH Minus Granules Risks - Risk of serious damage to eyes.
Blue Horizons pH Minus Granules Safety - Keep locked up and out of reach of children. - If swallowed, seek medical advice immediately and show this container or label. - Avoid contact with skin. - In case of contact with eyes, rinse immediately with plenty of water and seekmedical advice.

Our Official Blue Horizons Product Range

We suggest upgrading to Chrome