Brand

Rating

Price

Special Offers

Features

Container Size

For Use On

Operating Temperature Range

Product Type

Compressive Strength

Drying Time

Type

Compatible Materials

Drying / Bonding Time

To be cured at room temperature and used as a steel filler, this grey plastic steel putty allows you to efficiently plug cracks or breakages where you would not be able to repair them by brazing or soldering. With the ability to bond to metals, concrete, and some plastics, it's a versatile product. It's also resistant to rust, oil, petrol, water and chemicals and is machinable. Available in two varying sizes to suit your needs and possesses a mix ratio of 2.5:1.

Features and Benefits
• Resistant to a host of materials including rust, oil, petrol, water and chemicals making it a robust product
• Available in two sizes depending on your needs
• Can be tapped, machined, drilled or painted once dry to suit your requirements
• Is an ideal way to repair and patch up areas that would not be able to be repaired using brazing or welding

Typical Applications
• Ideal for use in production, maintenance and many tooling applications where welding or brazing wouldn't be possible or beneficial
• Can be bonded to most metals and concrete as well as some plastics

5 Minute Epoxy Adhesives are highly effective at creating a strong bond in a short amount of time. 

Features and Benefits
• Permanent non-shrinking bonds
• Bonds metals, glass, ceramics, concrete and wood
• Works down to -40°C when cured

Notes
• Max. operating temperature: 93°C
• Pot life: 4 minutes
• Mix ratio: 1:1
• Available in 400ml cartridges, 70g twin tubes and 28g Dev-Tube dispenser

A silicone adhesive/sealant compound for sealing, caulking, bonding and making gaskets. Used for electrically insulating, bonds to porous and non-porous substrates.

Good for abrasion/tear resistant linings. Protects against vibration, shock and wear. Cost-efficient moulds (self-levelling).

Flexane 80 
Shore 80, some flexibility. 
Max. operating temperature: 82°C.
Pot life: 30mins. Mix ratio: 3.33:1. 

Flexane 94 
Shore 94, relatively rigid.
Max. operating temperature: 82°C.
Pot life: 10mins.
Mix ratio: 2.19:1.

For use with Flexane 80 liquid to produce a lower durometer (softer) castable urethane.

Steel filler. Bonds to metals, concrete, and some plastics. Resistant to rust, oil, petrol, water and chemicals. Machinable.
Compressive strength: 57N/mm2.

Max. operating temperature: 121°C.
Pot life: 45mins.
Mix ratio: 9.0:1.

500gm "A" Plastic Steel Putty

Clear, permanent non-shrinking bonds. Bonds metals, glass, ceramics, concrete and wood. Works down to -40°C when cured. 

Max. operating temperature: 93°C.
Pot life: 4 minutes. 
Mix ratio: 1:1.

Size: 400ml, 70g and 28g.

25ml "5-Minute" Epoxy Adhesive

This aluminium filled Epoxy liquid is ideal for maintenance and repair work. Widely used for making moulds, patterns, and fixings, this liquid displays excellent strength and resistance to temperature.

Features and Benefits
• Excellent for moulds and reproducing fine detail for a cost-effective repair option
• Self-levelling for ease
• Displays non-shrink behaviour for professional results

500gm "F-2" Aluminium Liquid

Machinable. Resistant to rust, CFCs and other chemicals. Bonds to other metals and thermoset plastics. 

Max. operating temperature: 121°C.
Pot life: 60mins. 
Mix ratio: 9.0:1.

500gm "F" Aluminium Putty

Rapid curing multi-purpose toughened structural methacrylate adhesive which produces superior load bearing bonds to engineered plastics, metals, ceramics and many other difficult substrates. Minimal surface preparation. Resistant to weathering, humidity and wide variations in temperature.

50ml Devweld 530

Emergency repair products offer a method of making fast, permanent repairs in minutes. Easy to use, they are ideal for making repairs to a wide variety of materials with minimum surface preparation and offer a solution of returning vital equipment to service with minimum downtime.

High Speed Emergency Repairs Zip PatchTM
Adhesive impregnated patch. For repairs to pipes, tanks, containers, etc. Hardens at room temperature to form a tough waterproof finish in minutes. Bonds to most common substrates. 
Max operating temperature: 93°C. 
Pot life: 5mins.

11500 ZIP Patch Kit (1 Piece)

Fast-curing, self levelling for low-cost moulds and dies.Reproduces fine detail.Excellent surface finish.Machinable to close tolerances.
Max Operating Temperature: 121C. Pot Life: 45 minutes. Mix Ratio: 9.0:1.

500gm "B" Plastic Steel Liquid

Bronze-filled for refurbishing and maintaining equipment. Used on castings, bushings, shafts when brazing is not possible. Bonds to bronze, brass, ferrous metals and concrete. Easily machined, tapped and drilled. Max Operating Temperature: 121C. Pot Life: 35 minutes. Mix Ratio: 9.0:1.

500gm "BR" Bronze Putty

Devweld 531 is a two-part 1:1 ratio methacrylate adhesive designed for structural bonding of
thermoplastic, metal and composite assemblies. Devweld 531 is particularly well suited for
bonding thermoplastic materials and combines high strength and stiffness with the ability to
adhere difficult-to-bond materials.

Features:
Excellent shear, peel and impact strength.
Non-sagging.
Will fill gaps of up to 4mm.
Excellent load bearing qualities.
Resistant to weathering and humidity.
Specifically designed for difficult-to-bond.
Room temperature cure.
No surface preparation.
100% reactive.

50ml Devweld 531 1:1 Ratio

Stainless Steel Putty (ST) 
Stainless steel filler for repairs. Used for rust-free patching and rebuilding. Bonds to ferrous, non-ferrous metals and concrete. FDA approved.

Compressive strength: 58N/mm2. 
Max. operating temperature: 121°C.
Pot life: 45mins. Mix ratio: 9.0:1.

500gm "ST" Stainless Steel Putty

High-exothermic, non-rusting epoxy putty for use in wet environments and under water. Bonds securely to steel, iron, aluminium, brass, bronze, concrete, wood and plastics. Non-rusting, applies and cures in temperatures down to 4°C.

Compressive strength: 39N/mm2.
Max. operating temperature: 93°C.
Pot life: 45mins. Mix ratio: 1.40:1.

500gm "UW" Underwater Repair Putty

Release Agents Prevents compounds sticking to moulds.
Flexane Accelerator Shortens cure time of all Flexanes.
Flexane Primer For use in preparing substrates prior to bonding. FL10 - to metal. FL20 - to rubber. 
Cleaner - Blend 300 used on dirty materials.

112gm FL-20 Flexane Primer

310gm "Silite" Sealent Clear

Flexane 80: Shore 80, some flexibility. Max Operating Temperature: 82C. Pot Life: 30 minutes. Mix Ratio: 3.33:1.

500gm Flexane 80 Liquid

Devcon wear resistant putty is a smooth, non-rusting ceramic-filled epoxy putty used to repair and rebuild interfacing metallic, low-friction surfaces such as machine ways and flanges.

Recommended Applications:
Repairs in tight spots where a fine flowing putty is required.
Bonds to steel, iron, aluminium, brass, bronze, concrete and some plastics.
Prevents wear on metal surfaces that are exposed to abrasion and erosion such as valves and pumps.
Protects metal from bi-metallic corrosion.
Rebuilding shafts.
Restoring keyways to original dimensions.
Fixing wear resistant moulds.
Ideal for repairing tracing guides.
Protecting flanges and elbows.
Lining pumps and wear faces.
Repairing valve seats and bodies.

500gm "WR-2" Wear Resistant Putty

470ML 19600 Epoxy Release Agent

Flexane 60: Shore 60, max. flexibility. Max Operating Temperature: 82C. Pot Life: 35 minutes. Mix Ratio: 1.67:1.

500gm Flexane 60 Liquid

Manual, hand-held applicator gun 1:1 for dispensing and applying 50ml dispensing systems for epoxies and methacrylates. The most efficient method of dispensing and applying adhesives for both repair and assembly applications.

Manual Applicator Gun 1:1 for 50ml Cart

Ceramic filled epoxy liquid for castings where exceptional durability is required. For casting metal forming dies and tracers etc. Low friction with outstanding wear resistance. Non shrink for accurate reproduction of critical details.
Size: 500gm.

500gm "Wr" Wear Resistant Liquid

High density, micro-alumina ceramic bead-filled epoxy system. Protects equipment that handles particulate smaller than 3mm. For dust applications including slurry pumps scubbers, screens and screw conveyors. Is trowelable to a smooth surface and has resistance to a wider range of chemicals
Max Operating Temperature: 148C (Dry).
Pot Life: 45 minutes.
Mix Ratio: 2:1.

13.6KG Wear Guard Fine Load

Flexane 94: Shore 94, relatively rigid. Max Operating Temperature: 82C. Pot Life: 10 minutes. Mix Ratio: 2.19:1.

Our Official Devcon Product Range

We suggest upgrading to Chrome