Brand

Rating

Price

Special Offers

25mm black PE100 HDPE pipe (high density polyethylene) available in 25, and 100m coils.

16 bar maximum operating pressure
SDR 9-rated
2.3mm (min) /2.7mm (max) wall thickness
14.6mm (min) /15.7mm (max) internal diameter
20.3mm maximum outside diameter
This highly versatile product is suitable for almost any non-potable water application, as well as above ground potable water distribution networks. Check with your local water authority before using for potable drinking water as blue MDPE may be required.

Also suitable for hydroelectricity schemes, geothermal pipework, irrigation, aquaculture, marine outfalls and many other projects.

Replaces what was previously known as 20mm black MDPE or 20mm black alkathene pipe
Flexible, lightweight and easy to install
Corrosion free material for longer life
Tough black PE100 HDPE material
Fully compatible with a range of push-fit fittings from JDP
Suitable for open-cut and no-dig installation methods and for use in pipeline rehabilitation projects
Use 20mm pipe inserts and compression couplings & fittings to create a water supply network.

BSI approved (Kitemarked) to BS EN 12201-2:2011 + A1:2013. Approved under regulation 31 of the Water Supply (Water Quality) Regulations 2000.

HDPE Black Pipe - 25mm x 25m

HDPE Black Pipe - 25mm x 100m

Solid wall 25mm blue MDPE (also known as alkathene) pipe coil suitable for below ground potable water mains supply distribution.

12.5 bar maximum operating pressure. SDR 11-rated. 2.3mm wall thickness. WRAS approved & complies with BS EN 12201.

Flexible, lightweight and easy to install
Corrosion free material for longer life
Colour-coded PE80 light blue exterior, PE80 black inner layer
Fully compatible with a range of push-fit fittings from JDP
Suitable for open-cut and no-dig installation methods and for use in pipeline rehabilitation projects
Use 25mm pipe inserts and compression couplings & fittings to create a mains water supply network underground.
In a domestic UK property the standard service pipe size is 25mm blue MDPE. Check with your local water authority's requirements.

Use black HDPE for above ground water distribution instead of blue MDPE.

MDPE Blue Pipe - 25mm x 25m

Solid wall 20mm blue MDPE (also known as alkathene) pipe coil suitable for below ground potable water mains supply distribution.

12.5 bar maximum operating pressure. SDR 9-rated. 2.3mm wall thickness. WRAS approved & complies with BS EN 12201.

Flexible, lightweight and easy to install
Corrosion free material for longer life
Colour-coded PE80 light blue exterior, PE80 black inner layer
Fully compatible with a range of push-fit fittings from JDP
Suitable for open-cut and no-dig installation methods and for use in pipeline rehabilitation projects
Use 20mm pipe inserts and compression couplings & fittings to create a mains water supply network underground.
In a domestic UK property the standard service pipe size is 25mm blue MDPE. Check with your local water authority's requirements.

Use black HDPE for above ground water distribution instead of blue MDPE.

MDPE Blue Pipe - 20mm x 100m

20mm black PE100 HDPE pipe (high density polyethylene) available in 25, and 100m coils.

16 bar maximum operating pressure
SDR 9-rated
2.3mm (min) /2.7mm (max) wall thickness
14.6mm (min) /15.7mm (max) internal diameter
20.3mm maximum outside diameter
This highly versatile product is suitable for almost any non-potable water application, as well as above ground potable water distribution networks. Check with your local water authority before using for potable drinking water as blue MDPE may be required.

Also suitable for hydroelectricity schemes, geothermal pipework, irrigation, aquaculture, marine outfalls and many other projects.

Replaces what was previously known as 20mm black MDPE or 20mm black alkathene pipe
Flexible, lightweight and easy to install
Corrosion free material for longer life
Tough black PE100 HDPE material
Fully compatible with a range of push-fit fittings from JDP
Suitable for open-cut and no-dig installation methods and for use in pipeline rehabilitation projects
Use 20mm pipe inserts and compression couplings & fittings to create a water supply network.

BSI approved (Kitemarked) to BS EN 12201-2:2011 + A1:2013. Approved under regulation 31 of the Water Supply (Water Quality) Regulations 2000.

HDPE Black Pipe - 20mm x 25m

HDPE Black Pipe - 20mm x 100m

50mm black PE100 HDPE pipe (high density polyethylene) available in 25, and 100m coils.

16 bar maximum operating pressure
SDR 9-rated
2.3mm (min) /2.7mm (max) wall thickness
14.6mm (min) /15.7mm (max) internal diameter
20.3mm maximum outside diameter
This highly versatile product is suitable for almost any non-potable water application, as well as above ground potable water distribution networks. Check with your local water authority before using for potable drinking water as blue MDPE may be required.

Also suitable for hydroelectricity schemes, geothermal pipework, irrigation, aquaculture, marine outfalls and many other projects.

Replaces what was previously known as 20mm black MDPE or 20mm black alkathene pipe
Flexible, lightweight and easy to install
Corrosion free material for longer life
Tough black PE100 HDPE material
Fully compatible with a range of push-fit fittings from JDP
Suitable for open-cut and no-dig installation methods and for use in pipeline rehabilitation projects
Use 20mm pipe inserts and compression couplings & fittings to create a water supply network.

BSI approved (Kitemarked) to BS EN 12201-2:2011 + A1:2013. Approved under regulation 31 of the Water Supply (Water Quality) Regulations 2000.

HDPE Black Pipe - 50mm x 25m

32mm black PE100 HDPE pipe (high density polyethylene) available in 25, and 100m coils.

16 bar maximum operating pressure
SDR 9-rated
2.3mm (min) /2.7mm (max) wall thickness
14.6mm (min) /15.7mm (max) internal diameter
20.3mm maximum outside diameter
This highly versatile product is suitable for almost any non-potable water application, as well as above ground potable water distribution networks. Check with your local water authority before using for potable drinking water as blue MDPE may be required.

Also suitable for hydroelectricity schemes, geothermal pipework, irrigation, aquaculture, marine outfalls and many other projects.

Replaces what was previously known as 20mm black MDPE or 20mm black alkathene pipe
Flexible, lightweight and easy to install
Corrosion free material for longer life
Tough black PE100 HDPE material
Fully compatible with a range of push-fit fittings from JDP
Suitable for open-cut and no-dig installation methods and for use in pipeline rehabilitation projects
Use 20mm pipe inserts and compression couplings & fittings to create a water supply network.

BSI approved (Kitemarked) to BS EN 12201-2:2011 + A1:2013. Approved under regulation 31 of the Water Supply (Water Quality) Regulations 2000.

HDPE Black Pipe - 32mm x 100m

MDPE Blue Pipe - 20mm x 25m

HDPE Black Pipe - 32mm x 25m

HDPE Black Pipe - 50mm x 100m

Solid wall 50mm blue MDPE (also known as alkathene) pipe coil suitable for below ground potable water mains supply distribution.

12.5 bar maximum operating pressure. SDR 11-rated. 4.6mm wall thickness. WRAS approved & complies with BS EN 12201.

Flexible, lightweight and easy to install
Corrosion free material for longer life
Colour-coded PE80 light blue exterior, PE80 black inner layer
Fully compatible with a range of push-fit fittings from JDP
Suitable for open-cut and no-dig installation methods and for use in pipeline rehabilitation projects
Use 50mm pipe inserts and compression couplings & fittings to create a mains water supply network underground.
50mm blue water pipe is typically used where 100m to 800m of continuous below ground water supply pipe is required. However, check with your local water authority as distances vary. Manufactured from MDPE.

Use black HDPE for above ground water distribution instead of blue MDPE.

MDPE Blue Pipe - 50mm x 100m

MDPE Blue Pipe - 50mm x 25m

Solid wall 32mm blue MDPE (also known as alkathene) pipe coil suitable for below ground potable water mains supply distribution.

12.5 bar maximum operating pressure. SDR 11-rated. 3mm wall thickness. WRAS approved & complies with BS EN 12201.

Flexible, lightweight and easy to install
Corrosion free material for longer life
Colour-coded PE80 light blue exterior, PE80 black inner layer
Fully compatible with a range of push-fit fittings from JDP
Suitable for open-cut and no-dig installation methods and for use in pipeline rehabilitation projects
Use 32mm pipe inserts and compression couplings & fittings to create a mains water supply network underground.
In a domestic UK property the standard service pipe size is 25mm blue MDPE. Check with your local water authority's requirements.

Use black HDPE for above ground water distribution instead of blue MDPE.

Our Official Radius Systems Product Range

We suggest upgrading to Chrome