Show Prices:Exc VATInc VAT
2in x 2in x 1/8in x 24in Brass Bar Equal Angle CW614N/CZ121 - 1 Piece
Order Code: ZT1190620X
£39.99each Inc VAT (20%)
£199.95 minimum order value
Minimum order quantity: 5.
AvailableGBP199.95
https://www.zoro.co.uk/shop/maintenance-and-outdoor/engineering-materials/2in-x-2in-x-1-8in-x-24in-brass-bar-equal-angle-cw614n-cz121-1-piece/p/ZT1190620XDescription
Brass alloy CZ121 / CW614N is used for machining. It has Lead added to the composition to improve machinability. The Lead remains insoluble in the microstructure of the brass and the soft particles act as chip breakers.
• The most widely used of all the brasses due to its suitability for high speed machining operations and also the manufacture of intricate parts.
• The highest machinability of any copper alloy, excellent hot formability and good corrosion resistance.
• Typically used for wide variety of machined components made on high speed lathes including screws, bolts, nuts, bushing, pins, washers,
butts, hinges and also locks and components for watches.
Specifications for 2in x 2in x 1/8in x 24in Brass Bar Equal Angle CW614N/CZ121 - 1 Piece
- SpecificationCZ121 / CW614N .
- Chemical CompositionTin (Sn) 0.0-0.30%Nickel (Ni) 0.0-0.30%Copper (Cu) 57-59%Zinc (Zn) BalanceOthers (Total) 0.0-0.20%Iron (Fe) 0.0-0.30%Aluminium (Al) 0.0-0.05%Lead (Pb) 2.50-3.50%
- Mechanical PropertiesTensile Strength 360-500MPaElongation A 20 to 5%Proof Stress 230-350MPaHardness (Brinell) 90 to 160 HB
- Weight per metre2.74kg
- Material FormEqual Angle
- Physical PropertiesDensity 8.47 g/cm³Thermal Conductivity 123W/m.KElectrical Resistivity 0.062 x 10⁻⁶ Ω.mModulus Of Elasticity 97 GPaThermal Expansion 20.9 x 10⁻⁶ /KMelting Point 875°C
- MaterialBrass
- Number of Pieces1
- System of MeasurementInch
- Width2in
- Length24in
- Material FeaturesSolution Treatment or Annealing can be Done by Rapid Cooling After Heating Between 430-600°CHot Working Should Be Done Between 630-730°CGood Spark ResistanceLow Magnetic PermeabilityGood ConductivityGood Corrosion ResistanceCold Working is Poor and not RecommendedGood Machinability and Formability
- Material ApplicationArchitectural ExtrusionsHingesLocksMachined Components
- Thickness1/8in
