Brand

Rating

Price

Special Offers

Product Type

Lawn & Garden - Free UK Delivery Over £25 - Buy Online | Zoro

Stainless steel foam sprayer, pressure operated, 24 l, 8 bar. Max. operating pressure = 8 bar. Capacity = 24 l. Product type = spraying equipment. Safe work due to stainless steel housing, safety valve and air pressure control. Spraying efficiency: 7.3 m² per minute. Easy to handle and comfortable to work with, even overhead. Foam sprayer with compressed air drive and 3 m hose for compressed air. Easy to handle and safe to work with due to stainless steel housing, safety valve and air pressure control. For the application of aqueous, foaming cleaners (pH 2 - 12) The stainless steel foam sprayer is ideally suited for cleaning trucks and tractors, as well as for cleaning or removing rust from large surfaces. Due to the wide range of compatible cleaners and the practical rollers and handle it is equipped with, the device is the all rounder among the foam sprayers. - Tank 24 l - Foam sprayer with compressed air foam lance - Spraying efficiency: 7.3 m² per minute - Compressed air: can be set to up to 8 bar - Safe work due to stainless steel housing, safety valve and air pressure control - For foaming cleaners (up to pH 12) - Foam lance with 3 m compressed air hose

Stainless Steel Foam Sprayer Pressure Operated 24 L 8 Bar

HP parts cleaning table, with high pressure, insulated tank. Worktop width = 1150 mm. Worktop depth = 1129 mm. Max. load = 350 kg. Material = stainless steel. Product type = parts washers. Significantly longer bath service life due to cleaner recirculation system. Can also be loaded by crane. Cleaning carried out using high pressure of up to 80 bar. Manual cleaning with flow through brush with lid open or closed. The BIO-CIRCLE HP is the ideal cleaning machine for removing all kinds of dirt and residue from heavily soiled parts with complex geometries. Cleaning using high pressure from 8 to 80 bar removes even the most stubborn dirt and residues, such as cracked oils and resinous greases, effortlessly. Ideal to operate with a high pressure gun. The high pressure also penetrates difficult geometries without any problems and thereby effectively removes any contaminants. This makes it ideal for cleaning ball bearings, for example, and similar components. The cleaning temperature of 45 °C is preset at the factory and ensures an ideal cost/benefit ratio. The tank is insulated to prevent unnecessary heat loss and to save energy. The LED lighting on the inside provides good light conditions that enable the user to see even difficult parts clearly. The inside is equipped with a fan for ventilation and the panel is kept clear at all times by an air nozzle with a strong air flow. In addition, the panel can be cleared of splashes by using a squeegee. It is operated using a foot switch that is convenient to reach. A retractable step ensures maximum operating convenience for users with different heights. It is straightforward to load by crane, and the max. load totals 350 kg. Optionally, a stainless steel turntable provides the user with support when cleaning heavy parts. Type of dirt and residue: resin, wax, lime scale, rust, corrosion protection, solder, polishing pastes, dust, abrasion, separating agents, oil, grease, oil carbon, soot. Component geometry: whole components (no disassembly) , parts with a cup effect, parts with narrow gaps (<1 mm) , uncomplicated parts. Max. payload: 350 kg. Effective work surface: 860 x 580 x 480 mm. Working height: 950 mm/1210 mm. Max. operating temperature: 45 °C. Maximum filling quantity: 100 l. Tank material: V2A stainless steel. Electrical connection: 230 V, 50 Hz. Pump: 1.6 kW, operating pressure = up to 80 bar. Total weight of the cleaning system without tank filling: 250 kg.

HP Parts Cleaning Table, With High Pressure, Insulated Tank

Limescale remover, pack of 20 + 10 sprayers, with active foam. Contents = 500 ml. Weight = 10 kg. Weight per item = 0.5 kg. Product type = surface cleaning agents. Environmentally friendly - no VOCs and non-hazardous. Water-based, acidic cleaner with a pleasant fresh scent. Active foam with good adhesive properties - ideal for upright surfaces. Powerful cleaner with active foam - extra strong for limescale residue. Ideal for cleaning surfaces in the entire sanitary area, sauna and in swimming pools. The cleaner can also be used outdoors on glass, stones, terracotta and stoneware. The cleaner with active foam is also invaluable for removing limescale deposits in hoses, machines, on floors and many other areas in industry. Free of phosphates and chelating agents, contains neither AOX compounds* nor hydrochloric acid.

Limescale Remover, Pack Of 20 + 10 Sprayers, With Active Foam

Smoke resin remover, pack of 20 + 10 sprayers, NSF certified. Contents = 500 ml. Weight = 11.7 kg. pH value = 14. Weight per item = 0.59 kg. Hazard class = GHS05. Product type = smoke resin removers. Highly concentrated, water-based and actively foaming intensive cleaner Removes smoke resin deposits, and grease, oil and protein residue that has turned into resin. Cleans exhaust hoods, ovens, smoke chambers and cooking equipment. Can be rinsed off without residue without affecting the smell or taste of foodstuffs in accordance with 31 LFBG (NSF certified) Smoke resin remover is a highly concentrated, water-based and actively foaming intensive cleaner that is used for removing smoke resin deposits, resinified greases, protein residues and oils. The cleaner is NSF certified and is primarily used in the food industry. It can be used to clean exhaust hoods and exhaust ducts in large kitchens and restaurant kitchens, as well as canteens. The cleaner effectively removes deposits from ventilation ducts, or burnt-in residue from grills, bread and pizza ovens. The cleaner can also easily dissolve smoke resin deposits in smoking chambers, and is used to clean the air recirculation system in these chambers. For maintenance, the cleaner, which contains no phosphates or solvents, can also be used in an ultrasonic bath or for immersion processes, e.g. to effectively clean machine parts.

Smoke Resin Remover, Pack Of 20 + 10 Sprayers, NSF Certified

CB 100 industrial cleaner, pack of 20 x 0.5 l bottles, 10 sprayers, degreasing. Area of application = parts cleaning. Model = concentrate. Contents = 0.5 l. Weight = 10 kg. pH value = 10, 8. Weight per item = 0.5 kg. Product type = surface cleaning agents. No VOCs and non-hazardous. Based on renewable raw materials. Suitable for use in the food processing industry. Ready-to-use cleaners and degreasers for manual and machine use with natural grease dissolving power, no solvents (non-hazardous) CB 100 is an aqueous, low foam cleaning agent based on renewable raw materials. Due to the natural active ingredients, any dirt is easily removed without damaging the surfaces. It has a pleasant odour, contains no solvents or VOCs, and is non-hazardous as specified by the CLP regulation. The cleaning agent is therefore an effective alternative to solvents or petroleum. It produces very little foam and has a long shelf life. The cleaning agent can also be rinsed off with water without leaving residues, which makes it suitable for use in food industry sectors, along with maintenance. Applications: - For the removal of stubborn dirt, such as special greases that are difficult to remove, rubber abrasion, bitumen and wax residues, oils and pastes - Use in maintenance of engines and machines - Use in production and workshops - Suitable for use in the food processing industry, with NSF registration (reg. no. 146719, category code C1) Details: - No VOCs and non-hazardous - Nature Boost: based on renewable raw materials - Low foaming - NSF certification

CB 100 Industrial Cleaner, Pack Of 20 X 0.5 L Bottles, 10 Sprayers, Degreasing

CB 100 Alu industrial cleaner, pack of 20 x 0.5 l bottles, 10 sprayers, degreasing. Area of application = parts cleaning. Model = concentrate. Contents = 0.5 l. Weight = 10 kg. pH value = 8, 6. Weight per item = 0.5 kg. Product type = surface cleaning agents. No VOCs and non-hazardous. Based on renewable raw materials. With tarnish protection and aluminium protection formula. Ready-to-use cleaners and degreasers for manual and machine use with natural grease dissolving power and a special formula to protect aluminium, no solvents (non-hazardous) CB 100 Alu removes heavy dirt, such as oils, special greases or pastes from components or tools. Wax and bitumen residues as well as rubber marks can also be effectively removed. The water based cleaner provides the parts with an effective corrosion protection coating. The low foaming cleaner has a pleasant odour and contains no VOCs. It can therefore be used as a petroleum substitute. It is safe to use as it is non-hazardous as specified by the CLP regulation. Applications: - For pre-cleaning components - Suitable for use in production facilities as well as maintenance and servicing - For use in industrial facilities and the trades Details: - No VOCs and non-hazardous - Nature Boost: based on renewable raw materials - Tarnish protection, aluminium protection formula - Temporary intermediate storage possible, corrosion protection - Low foaming - Concentrate: ready-to-use

CB 100 Alu Industrial Cleaner, Pack Of 20 X 0.5 L Bottles, 10 Sprayers, Degreasing

GS 200 cleaner, pack of 20 + 10 sprayers, capacity 500 ml. Area of application = grease removal. Model = concentrate. Contents = 0.5 l. Weight = 9 kg. Weight per item = 0.45 kg. Product type = surface cleaning agents. Use when there is extreme soiling. High yielding - a very thin application is sufficient. VOC reduced and non-flammable. GS 200 dissolves extreme contamination in a natural way. The special feature of this cleaner is that the majority of the ingredients are based on renewable raw materials. These natural active ingredients are characterised by their very high dissolving power on the most stubborn contaminants. A high quality alternative to solvents that contain VOCs and irritants. Even a very thin application is sufficient to dissolve extreme contamination. Optimum performance while protecting employees and reducing the environmental impact. The highly effective cleaner and degreaser is NSF-certified for use in the food industry. Stubborn greases, anti-corrosion waxes, adhesive residues, bitumen, tectyl, silicone, sealants, rubber, stubborn cracking - the products of thermal decomposition of plastics or oil and much more can be efficiently removed from ball bearings, screw, barrel and nozzle areas. Burnt in layers of oil in gears and engines are reliably dissolved and removed. Due to its properties, the cleaner evaporates more slowly than conventional solvents. This results in a longer reaction time, which at the same time ensures high effectiveness and economy. The grease solvent ensures a high level of safety during application due to its high flash point (100 °C) Due to the reduced level of VOCs, only low emissions of product vapours occur during application, which means a less impact on the user and the environment. GS 200 is ready to use for manual application or immersion (also suitable for recirculation systems) Simply spray on thinly and wipe off with an absorbent cloth after a short reaction time. Non-hazardous according to CLP regulation. NSF certified under K3 146720.

Browse our original Bio Circle products in Lawn & Garden

We suggest upgrading to Chrome