Brand

Rating

Price

Special Offers

Product Type

System of Measurement

Range

Length

Graduations

Additional Features

Surface Finish

Includes

Material

Hole, Depth & Angle Gauges - Free UK Delivery Over £25 - Buy Online | Zoro

Kennedy tapered gauges are ideally suited for the rapid accurate checking of the inside diameters of tubing, slot widths, hole sizes, setting calipers etc. 
Manufactured from spring tempered steel with 0.1mm increments. Rustless properties allow for a longer tool lifespan. The satin chrome anti glare finish combined with permanent black figures provides easy to read measurements 

Features and Benefits
• Manufactured from spring tempered steel for increased durability 
• Rustless properties allow for a longer tool lifespan
• Satin chrome anti glare properties and black figures for easy to read measurements

Typical Applications
• Diameters 
• Tubing
• Slots
• Holes

Top and bottom faces accurately ground. The body can be reversed on the rule. 
Rule Length: 150mm (6")

The Moore & Wright Digital Angle Rule is easy-to-use thanks to its large LCD display and inside/outside angle measurement. Its stainless steel rule blades feature a mm scale. There is also a strong locking device.Specifications:Resolution: 0.05°.Functions: Hold function, on/off, zero-setting.

The Moore & Wright CSM Precision Sets are supplied with a rule (graduated both sides), Protractor head, Square head and Centre head. The datum faces are fully hardened and ground to resist wear. There is a centrally mounted protractor vial allows unrestricted viewing and the protractor has full 360° scale plate, graduated 0° - 180° - 0°. The protractor is also fitted with a satin chrome scale plate.  The precision rules have been fully hardened and tempered with deeply etched graduations on both sides for ease of reading and long life. It has a unique rule clamp that allows positive location and clamping and a clipped corner on rule to maximise capability  Square Head offers the following fixed angles: 15°, 30°, 45°, 60°, 75° and 90°.  Centre Head offers a fixed 90° angle, for finding the centre of round bar stock up to 120mm diameter.  MAWCSRM600 & MAWCSRME24 are rules specifically designed for use with the Combination Sets (MAWCSM300 & MAWCSME12).

The Stabila TECH 700 DA Digital Electronic Angle Finder for quickly determining and transferring interior and exterior angles from 0° to 270°. It has 1 digital display, 1 horizontal vial, 1 vertical vial and 2 coated measuring surfaces. The vials are easily read, even with the arm folded in. It has 2 particularly wide contact edges for accurate and reliable marking of angles in all positions.  The digital display shows large digits and the lighting can be activated and dimmed, depending on individual preference. Displays the angle bisectors at the touch of a button, ideal for quick and accurate mitre cuts. It also features the following functions:  LOCK: locking mechanism for transferring angles reliablyREF: allows a reference angle to be accepted, saved and then transferred to other componentsHOLD: saves the measured value for accurate measurements and quick transferring even in hard-to-see places.  The Stabila TECH 700 switches off automatically if not used for 60 minutes. It is IP54 rated, against splash and dust damage.  Supplied with 2 x AA Batteries and 1 x Bag.

Ideal for measuring slots, holes, grooves and recesses. The satin finished knurled handle allows fine adjustment of the gauge within the workpiece. The split ball contacts are hardened for greater accuracy and longer tool life. Use in conjunction with a micrometer to accurately measure internal dimensions. Supplied in plastic storage wallet.
Contents:
Size A: 3 to 5mm (1/8" to 13/64") - 90mm overall length,
Size B: 5 to 7.5mm (13/64" to 19/64") - 99mm overall length,
Size C: 7.5 to 10mm (19/64" to 25/64") - 110mm overall length
Size D: 10 to 13mm (25/64" to 1/2") - 110mm overall length.
For holes, slots and recesses beyond the range of the small hole gauges use Kennedy Telescopic Gauges.

Small Hole Gauge Set

These are called taper gauges only because of their shape - they do not measure tapers. They are ideally suited for the rapid accurate checking of the inside diameters of tubing, slot widths, hole sizes, setting calipers etc. Manufactured from spring tempered steel. 0.1mm increments. Rustless. Constant at 20°C. Satin chrome anti glare finish. Permanent black figures and graduations.

1-15mm Taper Bore Gauge

Plain Type Depth Gauge
Designed for measuring flat based recesses. Consisting of a precision ground steel rule and body which are positioned at 90° to each other. The body has precision ground locating faces, with a knurled adjusting/securing nut. 
Rule Length: 150mm (6”)

Protractor Type Depth & Angle Gauge
Ground steel with graduations from 0° - 180° in both directions for fast and accurate measurements. When the rule is positioned to 90° on the protractor it then provides accurate measurements of depth. 
Rule Length: 150mm (6”)

6"/150mm Plain Type Depth Gauge

Plain Type Depth Gauge
Top and bottom faces accurately ground. The body can be reversed on the rule. 
Rule Length: 150mm (6”)

Protractor Type Depth & Angle Gauge 
Graduations 0° - 180° in both directions. 1/2 deg. resolution.
Rule Length: 150mm (6”)

43M Metric Depth Gauge

1 x Moore Wright Digital Angle Rule 300mm.Specifications:Size: 300mm.Resolution: 0.05.Functions: Hold function, on/off, zero-setting.

Digital Angle Rule - 300mm

Moore & Wright MW725-01 Steel Pin Gauge Set 0.50-1.00mm (51 Pce)

MW725-01 Steel Pin Gauge Set 0.50-1.00mm (51 Pce)

The Moore Wright Digital Height Pre-Setter features a 2.5mm travel and automatically turns on when the surface is moved. Simple2 button design (On/Off Set/mm/inch) .IP65 rated.Powered by a CR2023 battery.

Digital Height Pre-Setter

Product Description
A set of pin gauges ideal for precision measurement of hole sizes, hole distance, pitch diameter of the thread, especially for curve flute wide measurement. Also ideal for gauging location, gauge slots, distance between holes, go & no-go gauging, setting other gauges and micrometers. The pin gauges are housed in a tailor made fitted protective case with sizes clearly labelled. 

Key Features
- Fully hardened alloy steel
- Heat treated to hardness of greater than 63HRC
- Gauges are cylindrical with pin length of 50mm or 2"
- Measuring size in increments of 0.02mm
- Tolerance: ±0.002mm
- Conforms to ISO standards for guaranteed accuracy and reliability
- Pin gauge handle included (vary according to set) 
- Furnished in attractive moulded, plastic fitted case.

Specification
-Metric Pin Gauge Set
-Range: 0.20mm - 1.18mm (step 0.02mm) 
-Contains 50 Pieces

0.20mm - 1.18mm Pin Gauge Set - 50 Pins

The Moore & Wright CSM Precision Sets are supplied with a rule (graduated both sides), Protractor head, Square head and Centre head. The datum faces are fully hardened and ground to resist wear. There is a centrally mounted protractor vial allows unrestricted viewing and the protractor has full 360 scale plate, graduated 0 - 180 - 0. The protractor is also fitted with a satin chrome scale plate. The precision rules have been fully hardened and tempered with deeply etched graduations on both sides for ease of reading and long life. It has a unique rule clamp that allows positive location and clamping and a clipped corner on rule to maximise capability Square Head offers the following fixed angles 15, 30, 45, 60, 75 and 90. Centre Head offers a fixed 90 angle, for finding the centre of round bar stock up to 120mm diameter. MAWCSRM600 & MAWCSRME24 are rules specifically designed for use with the Combination Sets (MAWCSM300 & MAWCSME12). The Moore & Wright CSME12 Precision Combination Set is a full set including 300mm/12in rule (graduated both sides), Protractor head, Square head and Centre head. Measurements Metric graduations in 0.5mm, numbered every 10mm. Imperial graduations 32nds and 64ths numbered every 1/8in.

CSME12 Precision Combination Set 300mm/12in MAWCSME12

The Stabila TECH 700 DA Digital Electronic Angle Finder for quickly determining and transferring interior and exterior angles from 0° to 270°. It has 1 digital display, 1 horizontal vial, 1 vertical vial and 2 coated measuring surfaces. The vials are easily read, even with the arm folded in. It has 2 particularly wide contact edges for accurate and reliable marking of angles in all positions.  The digital display shows large digits and the lighting can be activated and dimmed, depending on individual preference. Displays the angle bisectors at the touch of a button, ideal for quick and accurate mitre cuts. It also features the following functions:  LOCK: locking mechanism for transferring angles reliably REF: allows a reference angle to be accepted, saved and then transferred to other components HOLD: saves the measured value for accurate measurements and quick transferring even in hard-to-see places.  The Stabila TECH 700 switches off automatically if not used for 60 minutes. It is IP54 rated, against splash and dust damage.  Supplied with 2 x AA Batteries and 1 x Bag. This Stabila TECH 700 DA Digital Electronic Angle Finder has the following specification:  Length: 45cm Accuracy: Normal Position 0.029° = 0.5mm/m; Reverse Position 0.043° = 0.75mm/m Accuracy with Electronic Angle Measurement: ± 0.1° Measuring Distance: 0° to 270°

TECH 700 DA Digital Electronic Angle Finder 45cm

Igaging 35-0908 Digital Plane Setting Gauge 35-0908

35-0908 Digital Plane Setting Gauge

The Faithfull Prestige Angle Gauge is manufactured from aluminium using computer numerical controlled (CNC) machines. The black anodised finish offers enhanced corrosion protection and the laser engraved scales give outstanding measurement accuracy.  The protractor features laser etched graduations from 0-180°. It is used to determine existing angles, as well as creating new angles, setting bevels and transferring angles from one surface to another. A knurled thumb-nut allows the rule to be locked at a chosen angle.

Prestige Angle Gauge Black Aluminium 150 x 270mm

Measuring Gauge for Clamping Slope 10g

Very useful tool for bearing work and for gaging slots
Made of quality tool steel and accurately tapered throughout entire length for quick and convenient measuring
11mm (7/16") wide by 160mm (6-1/4") long
Can be used as a precision shim
One side graduated from .010" to .150" in thousandths of an inch; the reverse side from 0.3mm to 4mm in one-twentieth of a mm (0.05mm)

Find Hole, Depth & Angle Gauges Products

We suggest upgrading to Chrome