Brand

Rating

Price

Special Offers

Range

Size

Colour

Includes

Vibration Meters - Free UK Delivery Over £25 - Buy Online | Zoro

A simple to use, low cost vibration meter that records, analyses and displays vibration 
signals on a colour screen at the push of a button. Overall vibration values are 
displayed with colour coded alarm levels for ISO values and bearing condition. 
The fully dynamic cursor displays frequency and amplitude values. 
Colour coded frequency band alarms based on run speed can be displayed to 
diagnose machine faults such as balance, alignment and looseness. 
Readings are easily saved and recalled with all alarm levels and settings 
stored in non-volatile flash memory. Run speed and machine type are entered 
with the simple to use set-up wizard.
Size: 200 mm x 60mm x 26mm.
Weight: 280g (not including magnet).
Environmental: water, sand and dust: IP67 waterproof, 
operating: 0°C to 50°C, storage: -20°C to 70°C.
Power supply: 2x AA batteries.
Displayed frequency units: Hertz (Hz), RPM or CPM.
Input range: +/- 50g.
Dynamic range: 72 dB (0.05g resolution).
VA diagnostic bands (RPM = run speed):
Unbalance 1x RPM.
Misalignment 2x RPM.
Looseness 3x RPM.
Accessories: screw in probe tip (1/4" UNF 28). 
Nylon carrying case.
Options: accelerometer mounting magnet. 
Extended probe tip (stinger).

A simple to use vibration monitoring and analysis tool that helps to diagnose faults such as unbalance, misalignment and looseness.

 • Overall vibration values are displayed with colour coded alarm levels for ISO values and bearing condition.
 • Colour coded frequency band alarms based on run speed can be displayed to diagnose machine faults such as balance, misalignment and looseness.
 • VibTrend software enables PC based trending of machine condition over time and generation of reports
 • The fully dynamic cursor displays frequency and amplitude values.
 • Readings are easily saved and recalled, and all alarm levels and settings are stored in non-volatile flash memory.
 • Run speed and machine type are entered with the simple to use setup wizard.
 • BNC connector for external accelerometer.
Size: 200 x 60mm x 26mm.
Weight: 280g (not including magnet).
Environmental: water, sand and dust: IP67 waterproof, 
operating: 0°C to 50°C, storage: -20°C to 70°C. 
Power supply: 2x AA batteries.
Max. frequency resolution: 1.25 Hz @ 800 lines FFT setting.
Displayed vibration amplitude units: acceleration in g velocity in mm/s (or inches/s), bearing noise in BDU (bearing damage units).
Displayed frequency units: Hertz (Hz), RPM or CPM.
Input auto range: +/- 50g or +/- 5g
Dynamic range: 96dB (0.002g resolution)
VA diagnostic bands (RPM = run speed): 
unbalance 1x RPM, misalignment 2x RPM, looseness 3x RPM.
Accessories: standard 100mV/g BNC, accelerometer, 
nylon carrying case.
Options: Tacho strobe/flashlight attachment, 
bluetooth headphones/ear defenders.

Bearing Checker makes a proactive approach to maintenance economically feasible for everyone. It is a useful and low cost complement to your maintenance toolbox. Without specialised training, users can detect potential problems well before damage is detectable by heat and vibration.This unique three-in-one device uses shock-pulse technology along with built in temperature measurement and electronic stethoscope function (headphones sold separately) This can give you an indication of bearing or lubrication problems.  
• Measures shock pulse for early detection of bearing and marginal lubrication conditions.
• Electronic stethoscope function detects sound irregularities.
• Simple to use with 'traffic light' indication LED green (okay) - yellow (alert) - red immediate action required.

JCC DOWNLGHT V50 TILT LED 6.5W Tilt CCT JC1026/WH

Downlght V50 Tilt LED 6.5W

A simple to use, low cost vibration meter that records, analyses and displays vibration 
signals on a colour screen at the push of a button. Overall vibration values are 
displayed with colour coded alarm levels for ISO values and bearing condition. 
The fully dynamic cursor displays frequency and amplitude values. 
Colour coded frequency band alarms based on run speed can be displayed to 
diagnose machine faults such as balance, alignment and looseness. 
Readings are easily saved and recalled with all alarm levels and settings 
stored in non-volatile flash memory. Run speed and machine type are entered 
with the simple to use set-up wizard.
Size: 200 mm x 60mm x 26mm.
Weight: 280g (not including magnet).
Environmental: water, sand and dust: IP67 waterproof, 
operating: 0°C to 50°C, storage: -20°C to 70°C.
Power supply: 2x AA batteries.
Displayed frequency units: Hertz (Hz), RPM or CPM.
Input range: +/- 50g.
Dynamic range: 72 dB (0.05g resolution).
VA diagnostic bands (RPM = run speed):
Unbalance 1x RPM.
Misalignment 2x RPM.
Looseness 3x RPM.
Accessories: screw in probe tip (1/4" UNF 28). 
Nylon carrying case.
Options: accelerometer mounting magnet. 
Extended probe tip (stinger).

9071 Smart Vibration Meter

A simple to use vibration monitoring and analysis tool that helps to diagnose faults such as unbalance, misalignment and looseness.

The 9080 provides: 
 • Overall vibration values are displayed with colour coded alarm levels for ISO values and bearing condition.
 • Colour coded frequency band alarms based on run speed can be displayed to diagnose machine faults such as balance, misalignment and looseness.
 • VibTrend software enables PC based trending of machine condition over time and generation of reports
 • The fully dynamic cursor displays frequency and amplitude values.
 • Readings are easily saved and recalled, and all alarm levels and settings are stored in non-volatile flash memory.
 • Run speed and machine type are entered with the simple to use setup wizard.
 • BNC connector for external accelerometer.
Size: 200 x 60mm x 26mm.
Weight: 280g (not including magnet).
Environmental: water, sand and dust: IP67 waterproof, 
operating: 0°C to 50°C, storage: -20°C to 70°C. 
Power supply: 2x AA batteries.
Max. frequency resolution: 1.25 Hz @ 800 lines FFT setting.
Displayed vibration amplitude units: acceleration in g velocity in mm/s (or inches/s), bearing noise in BDU (bearing damage units).
Displayed frequency units: Hertz (Hz), RPM or CPM.
Input auto range: +/- 50g or +/- 5g
Dynamic range: 96dB (0.002g resolution)
VA diagnostic bands (RPM = run speed): 
unbalance 1x RPM, misalignment 2x RPM, looseness 3x RPM.
Accessories: standard 100mV/g BNC, accelerometer, 
nylon carrying case.
Options: Tacho strobe/flashlight attachment, 
bluetooth headphones/ear defenders.

9080-Pro Smart Trend Meter

Combination of three tools in one:
1- High specification vibration analyser
2- Two plane field balancer
3- Machine and plant Inspection software
The two plane field balancer is both powerful and simple to use with features such as expert trial weight location and live balance vectors
making field balancing quicker and more accurate.
Size: 220 mm x 95mm x 45mm.
Weight: 500g (not including accelerometer).
Environmental:
Water: MIL-STD-810F, Method 512.4, IP67 sealed against accidental
immersion (1m for 30 min).
Drop: MIL-STD-810F, Method 516.5, Procedure IV 26 drops from
1.22 m.
6 additional drops at -20°.
6 additional drops at 60°.
Operating: -30° to 65°.
Storage: -40° to 70°.
Humidity: MIL-STD-810F, Method 507.4, Sand & Dust: IP67, MILSTD-
810F, Method 510.4, Procedures I & II.
Power supply: Rechargeable battery (charger included).
Battery life: Typically 20 hours operating time depending on backlight
usage.
Frequency ranges: 0 Hz to 1 kHz, 0 Hz to 15 kHz.
Frequency resolution: Up to 0.3 Hz, 400, 800, 1600,
3200, 6400,12800, 25,600 or 51,200 lines FFT.
Input range: +/- 50g with standard 25mV/g C-Cubed accelerometer.
Dynamic range: 120 dB +/- 50g to +/- 0.0004g with standard accelerometer.
Auto set up of VA diagnostic bands
(RPM = run speed):
Instability 0Hz - 0.75 x RPM.
Unbalance 0.75 x RPM - 1.5 x RPM.
Misalignment 1.5 x RPM - 2.5 x RPM.
Looseness 2.5 x RPM - 3.5 x RPM.
Accelerometer Connection:
Standard 10 pin IP67 connected smart accelerometer with built-in ID and sensitivity calibration (nominally 25mV/g).
Numeric Keypad or Touch screen operation:
Stylus free collection of maintenance data using numeric key pad or by touching screen.
Accessories: Carrying case with neck strap. Stylus lanyard.
Docking station.
Displayed Amplitude Units:
Acceleration in g, Velocity in mm/s (or inches/s), Bearing noise in BDU (bearingdamage units).
Displayed Frequency Units:
Hertz (Hz), RPM or CPM.

9041 ULTRA-2 Vibration Analyser

Use for checking chillers (refrigeration), fans, cooling tower drives, centrifugal pumps, positive displacement pumps, air compressors, blowers, generic gearboxes (rolling element bearings) and machine tools (motor, gearboxes, spindles, etc.)

Supplied with USB cable, storage case, belt holster, quick reference guide, CD-ROM (includes MS Excel template and documentation) and 2x AA batteries.

805 Vibration Meter

Bearing Checker makes a proactive approach to maintenance economically feasible for everyone. It is a useful and low cost complement to your maintenance toolbox. Without specialised training, users can detect potential problems well before damage is detectable by heat and vibration.This unique three-in-one device uses shock-pulse technology along with built in temperature measurement and electronic stethoscope function (headphones sold separately) This can give you an indication of bearing or lubrication problems.  
• Measures shock pulse for early detection of bearing and marginal lubrication conditions.
• Electronic stethoscope function detects sound irregularities.
• Simple to use with 'traffic light' indication LED green (okay) - yellow (alert) - red immediate action required.

TRA-75 Quick Connector Transducer comes with Cable/Angle

A9073 Accelorometer Magnet

A9072 100mm Long Stinger

A simple to use vibration monitoring and analysis tool that helps to diagnose faults such as unbalance, misalignment and looseness.

 • Overall vibration values are displayed with colour coded alarm levels for ISO values and bearing condition.
 • Colour coded frequency band alarms based on run speed can be displayed to diagnose machine faults such as balance, misalignment and looseness.
 • VibTrend software enables PC based trending of machine condition over time and generation of reports
 • The fully dynamic cursor displays frequency and amplitude values.
 • Readings are easily saved and recalled, and all alarm levels and settings are stored in non-volatile flash memory.
 • Run speed and machine type are entered with the simple to use setup wizard.
 • BNC connector for external accelerometer.
Size: 200 x 60mm x 26mm.
Weight: 280g (not including magnet).
Environmental: water, sand and dust: IP67 waterproof, 
operating: 0°C to 50°C, storage: -20°C to 70°C. 
Power supply: 2x AA batteries.
Max. frequency resolution: 1.25 Hz @ 800 lines FFT setting.
Displayed vibration amplitude units: acceleration in g velocity in mm/s (or inches/s), bearing noise in BDU (bearing damage units).
Displayed frequency units: Hertz (Hz), RPM or CPM.
Input auto range: +/- 50g or +/- 5g
Dynamic range: 96dB (0.002g resolution)
VA diagnostic bands (RPM = run speed): 
unbalance 1x RPM, misalignment 2x RPM, looseness 3x RPM.
Accessories: standard 100mV/g BNC, accelerometer, 
nylon carrying case.
Options: Tacho strobe/flashlight attachment, 
bluetooth headphones/ear defenders.

A9086 Rubber Boot

A9083 Carry Case

A9012 Bnc Accelorometer

Vibration meter Accesories to suit compatible Smart Trend meters.

A9082 Tacho-strobe

A9081 Docking Cradle

Smart Vibration Monitor solutions with two models to provide either 4 or 8 accelerometer channels for online/fixed vibration monitoring.
• 24v DC (relay drive) switched output for each channel (warning/critical, g or velocity)
• 4 to 20mA output for each channel (g or velocity)
• Temperature and Tachometer input
• USB for connection to Smart Vibration monitor PC software
• Ethernet socket for connection to online analysis software

Find Vibration Meters Products

We suggest upgrading to Chrome