Brand

Rating

Price

Special Offers

Container Type

Product Type

For Use On

Features

Power Transmission & Flow Control - Free UK Delivery Over £25 - Buy Online | Zoro

F404 is a food grade lubricant for general purpose use. Multi-Purpose lubricant for use on bearings, cables, chains, castors, pins and hinges in food processing areas.

Features and Benefits
• NSF: H1 registered for use in food environments
• Effective over a wide temperature range 
• Effective corrosion resistance 
• Good penetration properties and water displacement 
• 360° valve for inverted use

PROTEAN Multi-Lube is an NSF: H1 registered general purpose food grade lubricant that is ideal for use in food & beverage, packaging, pharmaceutical and other cleanroom environments. It is effective at displacing water and penetrating surfaces, and it protects against corrosion. PROTEAN Multi-Lube has a temperature range of -20°C to +200°C and features a 360° valve for inverted use.

Benefits:

NSF: H1 registered for use in food & beverage, packaging, pharmaceutical and other cleanroom environments
Effective at displacing water and penetrating surfaces
Protects against corrosion
Temperature range of -20°C to +200°C
360° valve for inverted use

F404  Multi-Lube - NSF H1 Registered General Purpose Food Grade Lubricant

PROTEAN Chain Spray is an NSF: H1 registered, highly tenacious, food grade chain spray lubricant designed to keep chain and drive systems operating smoothly. Being both non-toxic and water resistant, PROTEAN Chain Spray is ideal for use on food conveyor systems where frequent washing down is required. Suitable for use in Packaging, Pharmaceutical and other cleanroom environments.
Benefits: Water resistant – withstands washing; Formulated with anti-fling additives for effective use on fast moving components - will not drip off; Anti-corrosion additives; Withstands high temperatures; 360° valve for inverted use;

Chain Spray - 400 ml - F408

Tygris TF8505 is a Silicone paste based on polydimethyl siloxane oil especially intended for use in industrial and laboratory lubrication applications. TF8505 is used as a high viscosity grease in the lubrication and assembly of taps, valves, elastomer seals and O-rings including applications working under vacuum. The high water repellent property of silicone paste gives excellent water washout resistance.

Benefits: Very resistant to extreme temperatures of between - 50 °C and + 200 °C in continuous use and of over 200 °C when exposed for short periods, Resistant to chemical agents: resists solvents - resists oxidation and remains unaltered by mineral and vegetable oils, Highly water repellent - resists very well to water wash out, Chemically inert; non corrosive on metals and no plasticising effect on rubbers or plastics. Very little variation in viscosity with fluctuations of temperature.

Silicon Paste - 500 GM - TF8505

PROTEAN White Grease is an NSF: H1 registered, spray-formulated, water resistant lubricant - ideal for use on roller and needle bearings and chains. Suitable for use within Food & Beverage, Packaging, Pharmaceutical and other cleanroom environments.
Benefits: Effective to high temperatures; Water resistant - suitable where frequent washing down of equipment occurs; Protects against corrosion; Temperature range: -20°C to +200°C; 360° valve for inverted use;

White Grease - 400 ml - F402

PROTEAN Food Area White Grease No.2 is a premium quality, water resistant grease that is ideal for use in food processing environments where incidental food contact may occur. It is designed for applications where frequent washdown of plant is essential. TF8304 is suitable for plain and anti-friction bearings. It is also Kosher Certified.

Benefits:

High degree of water resistance
Excellent corrosion protection
Good anti-wear and extreme pressure properties
Kosher Certified

Food Area White Grease No.2 - Premium Quality and Water Resistant - TF8304 - 400g

PROTEAN Belt Dressing is an NSF: H1 registered, spray-formulated, food grade belt dressing lubricant used to reduce slippage and extend the life of drive belts, increasing transmitted power and improving efficiency and economy. Suitable for use within Food & Beverage, Packaging, Pharmaceutical and other clean room environments.
Benefits: High tack for maximum power transmission; Reduces belt slippage for less squeal; Decreases energy costs; Does not reduce tensile strength; Effective in damp conditions; Extends belt life; Temperature range: -50°C to +150°C; 360° valve for inverted use;

Belt Dressing - 400 ml - F414

PROTEAN WD Anti-Rust Agent is an NSF: H1 registered, PTFE-based spray formulation that is effective for use in displacing moisture and water-based fluids from most surfaces, leaving a residual film of lubricant. It is suitable for use on sliding surfaces, in bearings, and for other light applications in food & beverage processing, packaging, pharmaceutical, and other cleanroom environments.

Benefits:

NSF: H1 registered for use in food & beverage processing, packaging, pharmaceutical, and other cleanroom environments
PTFE-based for effective moisture displacement
Use for light lubrication
Leaves a film of lubricant
360° valve for inverted use

WD Anti-Rust Agent F416 NSF: H1 Registered PTFE-Based

PROTEAN Vacuum Pump 100 is an NSF H1 registered, fully synthetic oil designed for the effective lubrication of vacuum pumps commonly used within the Food & Beverage environments. Offering a high degree of chemical stability with proven oxidation resistance, PROTEAN Vacuum Pump 100 oil successfully reduces the formation of sludge and deposits thus prolonging oil service life, yielding increased pump efficiency and reliability and maintenance savings. Halal/Kosher Certified.
Benefits: Low friction coefficient provides excellent lubrication and reduces wear; Fully synthetic oil provides extremely wide temperature and oxidation stability ensuring greatly extendedservicing intervals; High degree of de-emulsification provides greater lubrication efficiency; High degree of de-emulsification provides greater lubrication efficiency;

Vacuum Pump Oil 100 - 20 Litre - TF6820

PROTEAN Airline Oil is a food grade, non-toxic lubricant developed for pneumatic airline systems used in food, drink and pharmaceutical processing and packaging equipment. Also suitable for other compressed air systems where a clean, non-staining product is desired. Halal/Kosher Certified.
Benefits: Low coefficient of friction provides excellent lubrication and reduces wear; Clean and non-staining feature keeps rejects to a minimum; Protects against air moisture and provides a high degree of internal corrosion protection; Reduces residue and scum build-up extending maintenance intervals; Overcomes difficulties associated with vane scorching;

Airline Oil - 5 Litre - TF7905

F416 Protean is a PTFE-base aerosol spray which leaves a residue film of lubrication to remove water based fluids and moisture from a large variety of surfaces. This anti-rust agent can be used for light lubrication in and around food processing areas.

Features and Benefits
• NSF: H1 registered for use in food and beverage areas
• Temperature range: -20°C to +250°C. Suitable for a large range of applications

Typical Applications
• Sliding surfaces
• Bearings
• Packaging
• Pharmaceutical and clean room environments 
• Food and beverage processing areas

F416 Protean WD Anti-rust Agent, 400ML

The oil actively penetrates seized components. Enriched with anti-corrosion additives, a residual lubricating film adheres to the released part, facilitating re-assembly and helping prevent further corrosion. Equipped with an all-angle valve which promotes application in an inverted position.

F412 Protean Penetrating Oil 400ML

PROTEAN Penetrating Oil is an NSF: H1 Registered lubricant developed for the release of seized components, and is suitable for use within Food & Beverage, Packaging, Pharmaceutical and other clean room environments. 
F412 has penetrating and anti-corrosion properties which actively penetrates seized components leaving a residual lubricating and protective film on the released part, facilitating re-assembly and helping prevent further corrosion. Effective over a wide temperature range, 
Benefits: Powerful penetration through rust, scale and grime; Leaves a corrosion resistant coating; Temperature range -20°C to +250°C; 360° valve for inverted use;

Penetrating Oil - 400 ml - F412

PROTEAN Seize Release+ is an NSF: H1 registered, spray-formulated, fast acting penetrating and dismantling lubricant, suitable for use within Food & Beverage, Packaging, Pharmaceutical and other cleanroom environments. Engineered to 'shock' components through rapid freezing, PROTEAN Seize Release+ quickly penetrates seized and rusted parts, enabling optimum 'release' and easy dismantling.
Benefits: Fast acting Freeze & Release action for easy dismantling of seized, corroded and rusted parts; Enables rapid and efficient wicking of the lubricant for deep penetration; Released parts remain lubricated and protected from corrosion; Suitable for use on all metals and most common plastics and rubbers; 360° value for inverted use

Seize Release+ - 400 ml - F428

PROTEAN Synthetic Chain Lubricant is a highly effective clear lubricant used in the food processing industry where a tenacious non-fling product is to be used in both high and low temperature situations, actively extending chain life by excluding moisture and protecting from corrosion. Resistant to water wash off and acids, it has been specially formulated for use on both slow and fast moving chains.
Benefits: High resistance to throw off; Clear, non marking lubricant; Outstanding lubrication under dynamic conditions; Excellent resistance to water and acids; Resists and prevents corrosion

Synthetic Chain Lubricant - 400 ml - F477

PROTEAN PTFE Dry Film Lubricant is an NSF: H1 registered PTFE-enhanced lubricant engineered for use in Food & Beverage processing environments where conventional oils and greases are undesirable due to their dirt attracting nature. Ideal for lubricating links, pins and slides. Also suitable for use in Packaging, Pharmaceutical and other cleanroom environments.
Benefits: PTFE-based lubricant for excellent anti-stick properties; Effective release agent; Non-toxic film; Temperature range: -20°C to +270°C; 360° valve for inverted use;

PTFE Dry Film Lubricant - 400 ml - F410

PROTEAN Synthetic Ejector Pin Lubricant is a high temperature lubricant suitable for the lubrication of ejector pins, pillars and bushes on plastic injection moulding machines. Highly tenacious with an operating temperature of up to 240°C which will reduce contamination to mouldings, helping to prevent seizure and to protect against corrosion.
Benefits: Highly tenacious lubricant - resistant to 'creeping' along ejector pins; Provides long lasting lubrication; Reduced mould contamination;

Browse our original PROTEAN products in Power Transmission & Flow Control

We suggest upgrading to Chrome