ProductPage-Title-Mobile

Below

Scheduled_Orders

show_with_global

ProductPage-Add-To-Quotation

show

SearchPage-LeadTimeFilter

ProductPage-Pills-Visibility

Expanded

InfoPage-DiscountCodes

experiment_1

ProductPage-Attribute-Selector

VariantThreeDropDown

SearchPage_Top_Category

Default

SearchPage-FilterPanel-Expanded

Show

Personalised-BoostType

default

Number-Of-Recommendations

seven

SearchPage-SearchResultLimit

Hundred

ProductPage-ViewAll-Terminal-Node

ProductPage_Bundle

two_products

FamilyPage-Attribute-Selector

VariantZeroDropDown

StickyFilterPanel-InfiniteScroll

Hide

SingleLine-ProductHeader-Mobile

SHOW

Previously-Purchased-Tag

Discount-PromoLabel

hide

Sticky-MainMenu

New_Login_Registration_Toggle

ProductPage-AddToBasket-Mobile

ProductPage-Title-Length-Mobile

Vertical-Recommendations_Toggle

SearchPage-Enable-Sort-Attribute-Value

AttributeValueSortOnSearchAndCategory

Recommendations

test

MyaccountPage_Recommendations

SearchPage-BoostType

boost_img_lt_atb

search-templates

defaultTemplate

Header-MainMenu

Payment-GooglePay

SearchPage-InfiniteScroll-Limit

Thousand

Suitable For

MFR Part No.

Type

Standards Met

Length

Size

Additional Features

Material

Colour

Manufactured to BS7291 parts 1 and 3 Class S and CS kite marked.

Manufactured to BS7291 parts 1 and 3 Class S and CS kite marked.
Supplied in 25m coils

Push-fit Solution for Plumbing &amp; Heating Systems
For use with mains fed and indirect cold water systems, vented and unvented hot water systems, vented and sealed central heating systems. Pipes Speedfit fittings can be used with copper pipe to BS EN 1057 and Speedfit cross-linked polyethylene (PEX) Barrier Pipe to BS7291.
NOT to be used with gas, fuel oil or compressed air applications. Speedfit fittings cannot be used on stainless steel pipe. 
Standards Speedfit products are designed and manufactured under a fully integrated system assessed by B.S.I. to BS EN ISO9001. They are approved by the Water Regulations Advisory Scheme and BBA. Speedfit ‘PEM’ and ‘PKM’ fittings and Speedfit barrier pipe are kitemarked to BS7291 Part 1 and 3, Class S. (Licence No. KM39767).
Pipe in ceilings and roof voids should be clipped every metre and should not be fitted any closer than 60mm from the end of the fitting. Pipe should be adequately supported by pipe clips to prevent undue stress (side load) on fittings.
Can only be used with water or oil based paint, not cellulose based paints, paint thinners or strippers, solder flux or acid-based descalents or aggressive household cleaning products. 
Speedfit products, when used indoors, are not affected by sunlight. 
When used outdoors protect from ultra violet light by lagging or painting.
It is recommended that all installations are checked prior to use to determine that a seal has been made.

22MMX25M Speedfit Barrier Pipe Coil

Push-Fit Fittings

Push-Fit Fittings - Free UK Delivery Over £25 - Buy Online | Zoro

Manufactured to BS7291 parts 1 and 3 Class S and CS kite marked.
Supplied in 25m coils

Push-fit Solution for Plumbing & Heating Systems
For use with mains fed and indirect cold water systems, vented and unvented hot water systems, vented and sealed central heating systems. Pipes Speedfit fittings can be used with copper pipe to BS EN 1057 and Speedfit cross-linked polyethylene (PEX) Barrier Pipe to BS7291.
NOT to be used with gas, fuel oil or compressed air applications. Speedfit fittings cannot be used on stainless steel pipe. 
Standards Speedfit products are designed and manufactured under a fully integrated system assessed by B.S.I. to BS EN ISO9001. They are approved by the Water Regulations Advisory Scheme and BBA. Speedfit ‘PEM’ and ‘PKM’ fittings and Speedfit barrier pipe are kitemarked to BS7291 Part 1 and 3, Class S. (Licence No. KM39767).
Pipe in ceilings and roof voids should be clipped every metre and should not be fitted any closer than 60mm from the end of the fitting. Pipe should be adequately supported by pipe clips to prevent undue stress (side load) on fittings.
Can only be used with water or oil based paint, not cellulose based paints, paint thinners or strippers, solder flux or acid-based descalents or aggressive household cleaning products. 
Speedfit products, when used indoors, are not affected by sunlight. 
When used outdoors protect from ultra violet light by lagging or painting.
It is recommended that all installations are checked prior to use to determine that a seal has been made.

22MMX25M Speedfit Barrier Pipe Coil

Description

We suggest upgrading to Chrome