Brand

Rating

Price

Special Offers

Material

Product Type

Tools & Machining - Free UK Delivery Over £25 - Buy Online | Zoro

Micro alignment of blade through ball bearings. Dovetail slide with take up gib. Rapid approach vice. Adjustable hydraulic feed. Automatic cut off. Variable speed: No belt change. No time wasting. 
Standard accessories: Coolant pump & accessories. Instructions.
Optional accessories: Single roller stand 1-625-994 MSR4 4 roller adj. stand 0335-7610.
Maximum capacity: 
@ 90°: Round 250mm, Square 250 x 250mm, Rectangular (H x W) 250 x 415mm.	
@ 45°: Round 190mm, Square 190 x 190mm, Rectangular (H x W) 250 x 190mm. 
Vice capacity: 450mm. Blade size: 3300 x 27 x 0.9mm.
Blade speed - stepless: 25-75m/min. Mitre cut: 45°. Motor: 2hp.
Dimensions (L x W x H):  1750 x 575 x 1120mm.

l A most essential accessory – a complete answer to
clamping
l Saves setting up time l Covers a wide range
l Choice of models.
58 Pc. Steel clamping kit includes;
l 24 Pcs Studs 4 of each length 3”,4”,5”,6”,7” and 8”
l 6 Pcs T nuts, 6 Pcs Flanged Nuts
l 4 Pcs Coupling Nuts,
l 6 Pcs Step Clamp l 12 Pcs (6 Pairs) Step Blocks.

KV Series - 230V/1ph 50Hz
Heavy-duty suitable for continuous use. High quality electrics and limit switches to blade wheelcovers make safe to use and conform to CE. Air pipe keeps the visibility clear near the cutting edge.

Standard accessories
Saw blade butt welder with integrated annealing unit. Blade shear, grinder and built-in blade and tyre cleaning brush. Lo-volt light. Set of tools. Instruction manual and parts list. Rip fence for straight, repeated cutting and is easily adjustable for varied size. Mitre protractor for angular cutting.

S181G
User-friendly safety switch according to IP54 with under voltage release and protective motor switch. Three blade speeds via gear shifting mechanism. Robust cast iron design. Lowering using hydraulic system with continuous adjustment. Coolant system supplied as standard. Ball bearing five point blade guide. Quick action vice. Automatic limit stop. Chip brush.

Maximum capacity details:
Cutting range at 0° (round): 180mm.
Cutting range at 0° (square): 180 x 240mm/65 x 300mm.
Cutting range at 45° (round): 110mm.
Cutting range at 45° (square): 170 x 110mm.
Blade speed: 39/66/82m/min.
Blade size: 2362 x 19mm.
Dimensions: 1275 x 450 x 1100mm.
Motor power: 750W.

Accessories
Bi-metal blade. 
Hydraulic counter 
pressure cylinder. 
Machine sub structure. 
Material limit stop. 
Quick action vice. 
Coolant equipment.

Excel Steel Sawhorse with Adjustable Legs is a sturdy and versatile tool used to support various materials during cutting, sawing, and other construction or DIY projects. These sawhorses are made of high-grade steel making them strong and durable for heavy-duty tasks. With their fast-open mechanism, setting up is straight forward and simple. Powder-coated steel prevents corrosion and withstands rigorous environments. This folding sawhorse includes an easy carry handle for effortless transport and rolled edges for safety and comfort. Telescopic legs allows you to adjust each one individually to compensate any unevenness on the ground. The legs fold neatly into the top rail, forming an 84 x 150 x 895mm long package which is easily stored in the back of a van.

Features:
Fast-open mechanism for straight forward and simple setup
High grade steel & Powder-coated steel prevents corrosion and withstands rigorous environments
Slots for 45mm x 95mm timber joists to support table top
Top surface with shallow channels for supporting non-flat work items
Material support pegs allow upright storage of materials & easy cutting
Non-marring feet help to stabilize the sawhorse and will help protect your finished flooring
Telescopic legs with 8 height settings
Carry handle for easy effortless transport
4 Independent adjustable legs which allow you to work on uneven surfaces
589kg Maximum weight capacity per sawhorse and when paired can safely hold up to 1178kg

Specification:
Barcode: 08906701801729
Brand: Excel
Material: Steel
Pack Includes: 2 Piece Sawhorse
Max. Load Capacity (Pair) : 1, 178kg
Lowest working height: 64cm
Highest working height: 82cm

Steel Sawhorse Adjustable Legs Twin Pack 1178Kg

Excel Mechanics 8 Drawer Tool Box Chest & Roller Cabinet is a spacious and versatile storage solution for all your mechanic tools. With a total of 8 drawers, it offers ample space to organize your wrenches, screwdrivers, sockets, and other essential tools. The chest is made of sturdy steel for durability and rust resistance. The super smooth draws glide open effortlessly, reassuringly clicking into the fully open position - everything seems to fit together perfectly. The top chest/toolbox section can be lifted from the roller cabinet giving you flexibility and portability. The security-lock and bar locks in this section keep your belongings secure. The cabinet comes with customisable hooks that can be positioned according to your needs. The hooks are ideal for hanging larger tools, or giving you quick access to frequently used equipment. The smooth castor wheels make manoeuvring the cabinet around a garage or workshop a breeze.

Features:
8 drawers provides ample storage space for a wide variety of tools
Ball-bearing slides drawers open and close smoothly and effortlessly
Powder-coated steel frame durable and rust-resistant
Removable top chest offers flexibility and portability
Lockable drawers keeps your tool safe and secure
Allows for easy organization and quick access to your tools
2 locking wheels ensures stability during use
Flexible universal wheels makes it easy to move the cabinet around your workshop or garage

Product Specification:
Brand: Excel
Barcode: 5056533439782
Dimensions (W x H x D) : 615mm x 1115mm x 330mm
Maximum loading capacity: 70kg
Top chest dimensions: W 600mm x 340mm
Top chest side dimensions: 260mm x 340mm
Bottom cabinet dimensions: 615mm x 700mm
Bottom cabinet side dimensions: 330mm x 700mm
Colour: Black

Roller Tool Chest Cabinet 8 Drawer Storage Toolbox

Excel Steel Sawhorse Heavy Duty Twin Pack 500kg Capacity
Excel Steel Sawhorse Heavy Duty Twin Pack 500kg Capacity is a pair of heavy-duty sawhorses that are perfect for a variety of tasks, including supporting wood, drywall, and other materials while cutting, sawing, and drilling. They are made of high-grade steel and have a powder-coated finish to prevent corrosion. Two removable support arms can assist in creating a flush table top when paired, giving you a truly balanced and adequately supported workspace. They are lightweight and easy to transport, making them ideal for use on-site or in the workshop. They have a fast-open mechanism for quick and easy setup, and they fold down for easy storage.

Key Features
Made of high grade steel
Non-slip rubber feet
Lightweight and extremely portable
Not Height Adjustable
Fast-open mechanism for straight forward and simple setup
Easy carry handle for effortless transport
Maximum load capacity a pair 500kg

Specification
Brand: Excel
Barcode: 0743031863762
Material: Steel
Pack Includes: 2 Piece Sawhorse
Open Size (L x W x H) : 935 x 465 x 740mm (including support arms) 
Fold Size (L x W x H) : 915 x 130 x 98mm (including support arms) 
Max. Load Capacity (Pair) : 500kg

Steel Sawhorse Heavy Duty Twin Pack 500kg Capacity

Clamping height adjustable 
Brass plate below clamping arm protects the material from damage  

Table groove 18mm
Stud Size 16mm
LxWxH    133 x 50 x 49mm 
Height adjustment    0-101 mm

Hold Down Clamps 2 Pieces Set Table Groove 18mm Stud 16mm

Excel 2-in-1 Electric Stapler Nailer Gun is is designed to handle two types of fasteners: staples and nails. This versatility makes it suitable for a wide range of applications, from attaching fabrics to wood using staples to securing pieces of wood together with nails. It uses staples ranging from 15mm to 32mm in length, allowing you to choose the appropriate staple length for your project. 240V electric supply eliminates the need for manual force making the stapling and nailing process quicker and more consistent.

Features:
Lightweight body made for a high impact composite plastic
Rubber grip handle to ensure a secure grip and provide more comfort
Anti-jam mechanism allows for continuous tacking, making your work smoothly
Magazines large capacity of 100 nails means you can work longer before reloading
Ideal for: Attaching fabric to wooden frames, Securing upholstery, Fastening plywood sheets together, Installing trim and molding, Constructing furniture, Carpentry and woodworking projects.

Comes with:
1 x Hex Key

Specification
Brand: Excel
Voltage: 230-240V/50Hz
Rated Current: 5A
Firing Speed: 20pc/min
Wire Spec.: 18 Gauge
Crown Width: 5.7mm
Staple Type: Type 90
Nail Type: F
Staple Length: 15 - 25mm
Brad Width: 2.0mm
Nail Length: 15 - 32mm
Warranty: 12 months standard warranty

2-in-1 Electric Stapler Nailer Gun 18G Heavy Duty 240V

Micro alignment of Blade through Ball Bearings & Carbide Blade Guides. Dovetail slide with take up gib. Rapid approach Vice. Adjustable Hydraulic Feed. Automatic Cut Off. Variable Speed. No Belt change. No time wasting. Speeds up production. Coolant Pump & Accessories.

PBS250V Heavy Duty Bandsaw

Stand alone coolant system with high volume tank. Specially designed water way for better cooling effect. Adjustable setting with scales for better cutting length measurement. Heavy duty design for spindle and worm gear box. Swift clamping handle design for easy work piece loading. Shock proof design for control panel. Miter design for cutting angle adjustment 45° on the right and left respectively.

ECS315 Circular Saw - 1-642-200T

Versatile Machine for drilling - milling & boring operations. Heavy duty & sturdy machine made with a generous size meehanite casting. Rated for continuous use & long life expectancy. Made to accurate engineering tolerances by highly skilled engineers during manufacture. 3 HP Motor allows larger cuts to be taken during production runs. R8 spindle allows a large selection of standard tooling to be used. Automatic stop to up/down feed at the end of the preset travel. Angular positioning to left/right through worm & gear for ease. Reversible switch allows the spindle to run clockwise & anti-clockwise. Centralised one shot lubrication ensures lubrication to all parts that are otherwise inaccessible. DRO allows you to work in either imperial or metric calibrations. Hardened slide ways give the machine a much longer production life. Quill feed at 3 rates of Feed give you the option to select the correct feed to quill to suit your individual production requirements. Servo type variable & rapid feeds are available for both longitudinal & cross feeds. Electrically Interlocked spindle guard conforms to the latest CE regulations & health & safety standards. 3 Axis DRO.

ETM-3VS Turret Mill - 1-199-300

l A most essential accessory – a complete answer to
clamping
l Saves setting up time l Covers a wide range
l Choice of models.
58 Pc. Steel clamping kit includes;
l 24 Pcs Studs 4 of each length 3”,4”,5”,6”,7” and 8”
l 6 Pcs T nuts, 6 Pcs Flanged Nuts
l 4 Pcs Coupling Nuts,
l 6 Pcs Step Clamp l 12 Pcs (6 Pairs) Step Blocks.
Note: Image is for illustrative purposes only and may differ from the actual product

PK 104m Clamping Kit - 3-100-200M

Heavy Duty  
Linishing belts can be used in Vertical or Horizontal position 
Table Tilts 45° 
Mitre Gauge tilts L60° - R60°  
Heavy duty 1100W 240V 1Ph motor 
Quick Belt Change 
Net Weight 54 Kgs

Bdg 69 Belt and Disc Sander

PK 103 3/8" Stud 16NC, 1/2" T Slot

The Excel 5157 heavy duty steel folding sawhorses are extremely tough and durable Two removable support arms can assist in creating a flush table top when paired, giving you a truly balanced and adequately supported workspace. It is a lightweight folding sawhorse and includes an easy carry handle for effortless transport. It is made of high grade steel and powder coated steel prevents corrosion and withstands rigorous environment. Features: 500kg maximum load capacity a pair Made of high grade steel with ergonomic handle Lightweight, easy to use and extremely portable Fast-open mechanism for straight forward and simple setup  Specification: Open Size (L x W x H): 935 x 465 x 740mm (including support arms) Fold Size (L x W x H): 915 x 130 x 98mm (including support arms) Max. Load Capacity (Pair): 500kg Material: Steel

5157 Heavy Duty Steel Folding Sawhorse Twin Pack 500kg Capacity

ETM-2VS R8 Variable Speed 1-199-200
3 AXIS DRO - Power feed to three axis. Versatile machine for drilling - milling and boring operations. Heavy-duty and sturdy machine is made of meehanite casting of generous proportion. Rigid machine is rated for continuous use and will give you longer life expectancy. Accurate engineering tolerances have been met by highly skilled engineers during manufacture. 3hp motor allows you to take large cuts during your production runs. R8 spindle allows you to use a large selection of standard tooling. Automatic stop is to up/down feed at the end of the pre-set travel. Angular positioning to left/right through worm and gear for ease. Reversible switch allows you to run spindle clock and counter clockwise. Centralised one shot lubrication ensures lubrication to all parts otherwise inaccessible. Metric dials with DRO allow you to work in either inch or metric calibrations. Hardened slide ways gives the machine much longer production life. Quill feed at three rates of feed give you the option to select the correct feed to quill to suit your individual production requirements. Servo type variable longitudinal cross and vertical feed and rapid. Electrically interlocked spindle guard conforms to the latest CE regulations and Health and Safety Standards.
Standard accessories:
Power feed to quill - three rates. Servo type longitudinal, cross and vertical feed and rapid. One shot lubrication. Coolant system. Electrically interlocked spindle guard. 
Low volt machine light.

Specifications:
Table size: 228 x 1245mm.
Table travel (long): 838mm.
Saddle travel (cross): 300mm.
Knee travel (vertical): 400mm.
Quill travel: 127mm.
Ram travel: 315mm.
Spindle motor: 2.2kW (3hp).
Spindle taper: R8.
Quill power feed: 0.04, 0.08, 0.15mm/rev.
Spindle speeds: 70 - 4200 variable speed.
Overall length: 1700mm.
Overall width: 1600mm.
Overall height: 2130mm.
Spindle to table: min. 0mm, max. 415mm.
Spindle to column: min. 170mm, max. 485mm.

ETM-2VS Vari Turret Milling Machine

OPTI B40 GSM
Geared head with power feed and coolant system 0333-4400 3ph. Convincing arguments: quality, efficiency and price. Heavy-duty solid cast iron construction. Heavy-duty thick walled cast iron upright provides for smooth running and stability. Automatic gearwheel lubrication via oil pump. High concentricity precision due to stable main spindle hardened and ground. Nine selectable speeds via gear shifting lever at the front of the drill head and two stage driving motor provides for 18 speeds. Heavy-duty solid drilling table, precision ground with intersecting T-slots, heavily ribbed at the underside, height adjustable via rack. Integrated coolant system and coolant tank. Smooth running due to ground gearwheels. Threading (trapping) facility. Lockable main switch with protective motor switch. Machine lighting integrated in drill head. Spindle locking with integrated drill drift for easy tool change. Vertical adjustable chuck guard. 
Adjustable drill depth stop with millimetre scale. Solid mounting base with ‘T’ slots, 
precision ground.
Standard accessories: Quick-action drill chuck 3 - 16mm. Taper mandrel 4MT. Machine light. Coolant system.

Specifications:
Drilling cap steel: 35mm.
Drilling cap cast iron: 45mm.
Threading in steel max: M24.
Threading in cast iron max: M30.
Spindle to column: 350mm.
Distance spindle to table max: 780mm.
Distance spindle to foot max: 1320mm.
Spindle holding fixture: MT4.
Spindle speeds: 50 - 1450rpm.
Number of steps: 18.
Sleeve travel (quill): 180mm.
Auto spindle sleeve feed: 2 steps/0.1 - 0.2mm/rev.
Column diameter: 150mm.
Work area of table (L x W): 560 x 560mm.
Work area of foot (L x W): 510 x 500mm.
T-slot size: 18mm.
Motor power: 1.5kW.
Size (L x W x H): 73 x 56 x 222cm.

B40GSM Geared Head Pedestal Drill

Cutting blade to column: 520mm. 
Capacity max. work height: 310mm. 
Table size: 600x500mm.
Table inclination (4 ways): 15. 
Blade length: 3880mm. 
Max width: 16mm. 
Blade speeds stepless: Low 15-55m/min, High 96-390m/min.
Butt welder capacity: 2.4KVA 3-16mm.
Drive motor: 1.5kW. 	
Weight: 500kgs.

KV50 20" Throat Heavy Duty Vertical Bandsaw

Specifications:
Maximum capacity details:
Cutting range at 0 (Round): 180mm. 
Cutting range at 0 (Square): 180 x 240mm / 65 x 300mm.
Cutting range at 45 (Round): 110mm.
Cutting range at 45 (Square): 170 x 110mm. 
Blade speed: 39/66/82 m/min. 
Blade size: 2362 x 19mm. 
Dimensions: 1275 x 450 x 1100mm. 
Weight: 130kg. 
Motor power: 750w.

S181G Geared Drive Bandsaw 3 Phase

Model KP200 Round Cutting Cap. 200mm.
Complete hydraulic system. Infinitely variable saw feed pressure control. Complete electric components with motor protection. Recalculating coolant system. Adjustable material length stop. Clamping device for short ends. Equalising bar for jaws. 
Nesting fixture for multiple sawing of stacked bars, small rounds and tubing. Material support stand. One saw blade ready for cutting. One set of necessary tools and tool box. One grease gun. Instruction manual and parts list.

Specifications
90° max.: 200mm.
Capacity: 190 x 200mm.
45° max: 90mm.
Capacity: 190 x 90mm.
Stroke length: 120mm.
Strokes/min: 110, 140.
Blade size: 350 x 32mm.
Main motor: 4ph, 1hp.
Size (L x W x H): 120 x 51 x 79cm.

Browse our original Excel products in Tools & Machining

We suggest upgrading to Chrome