Brand

Rating

Price

Special Offers

Length

Morse Taper

Outer Diameter

Inner Diameter

Opening Diameter

Features

Centre Points - Free UK Delivery Over £25 - Buy Online | Zoro

Inserts
For greater flexibility. Bodies and points manufactured from hardened and ground high grade tool steel, for improved resistance to wear extending tool operating life. Precision manufactured bearings evenly distribute axial load for smooth operation, reducing friction and heat build up. The bearings are protected by seals to prevent dirt and coolant ingress. Modern bevel head design allows unhindered approach of toolholders and lathe tools to the workpiece.

Type 600-20 
With extended live centre.

Manufactured from hardened and ground high grade tool steel, for improved resistance to wear extending tool operating life. Precision manufactured bearings evenly distribute axial load for smooth operation, reducing friction and heat build up. The bearings are protected by seals to prevent dirt and coolant ingress. Modern bevel head design allows unhindered approach of toolholders and lathe tools to the workpiece

Type 604 HVL
With extended live centre.

Manufactured from hardened and ground high grade tool steel, for improved resistance to wear extending tool operating life. Precision manufactured bearings evenly distribute axial load for smooth operation, reducing friction and heat build up. The bearings are protected by seals to prevent dirt and coolant ingress. Modern bevel head design allows unhindered approach of toolholders and lathe tools to the workpiece

Insert Extractor Tool
For greater flexibility. Bodies and points manufactured from hardened and ground high grade tool steel, for improved resistance to wear extending tool operating life. Precision manufactured bearings evenly distribute axial load for smooth operation, reducing friction and heat build up. The bearings are protected by seals to prevent dirt and coolant ingress. Modern bevel head design allows unhindered approach of toolholders and lathe tools to the workpiece.

These Faithfull Centre Points are used for accurate alignment of dowel holes. To use Place the blunt end in a hole already made for dowel in one piece of wood, place the second piece of wood in required position and press down to leave centre of second hole accurately marked.

Mini Drive Centre. Suitable for all types of spindle work. Integral points will not work loose. 4 prong for squared spindle ends.

Facilitates the boring of long holes. 5/8” diameter head with 5/16” bore. Supplied complete with removable centre and hex key. May also be used as a tail centre when there is risk of splitting.

Slim, Deluxe Rotating Centre. 12mm dia. nose with 60 deg. point. Main body remains stationary while small point turns. Ideal for smaller precision work as well as general spindle turning. Triple bearing design incorporating thrust race.

Rotating centre with 5/16” bore for long hole boring.Based around our standard duty configuration. Also useful for spindle turning when there is a danger of a centre point splitting the stock. Set comprises: Hollow rotating centre, nose cone for use as standard centre, centring rod.

Standard Duty Rotating Centre. 31mm dia. head with 60 deg. point. Excellent general purpose centre. Twin deep groove ball races.

Type 614 A
Supplied without inserts.

For greater flexibility. Bodies and points manufactured from hardened and ground high grade tool steel, for improved resistance to wear extending tool operating life. Precision manufactured bearings evenly distribute axial load for smooth operation, reducing friction and heat build up. The bearings are protected by seals to prevent dirt and coolant ingress. Modern bevel head design allows unhindered approach of toolholders and lathe tools to the workpiece.

Type 604 H 
Hardened and ground body.

Manufactured from hardened and ground high grade tool steel, for improved resistance to wear extending tool operating life. Precision manufactured bearings evenly distribute axial load for smooth operation, reducing friction and heat build up. The bearings are protected by seals to prevent dirt and coolant ingress. Modern bevel head design allows unhindered approach of toolholders and lathe tools to the workpiece

For greater flexibility. Bodies and points manufactured from hardened and ground high grade tool steel, for improved resistance to wear extending tool operating life. Precision manufactured bearings evenly distribute axial load for smooth operation, reducing friction and heat build up. The bearings are protected by seals to prevent dirt and coolant ingress. Modern bevel head design allows unhindered approach of toolholders and lathe tools to the workpiece.

Inserts
For greater flexibility. Bodies and points manufactured from hardened and ground high grade tool steel, for improved resistance to wear extending tool operating life. Precision manufactured bearings evenly distribute axial load for smooth operation, reducing friction and heat build up. The bearings are protected by seals to prevent dirt and coolant ingress. Modern bevel head design allows unhindered approach of toolholders and lathe tools to the workpiece.

070721 614-00 4MT 60Degrees Extended Insert

362080 600-20 2MT Revolving Centre

058670 604HVL 3MT Revolving Centre

Insert Extractor Tool
For greater flexibility. Bodies and points manufactured from hardened and ground high grade tool steel, for improved resistance to wear extending tool operating life. Precision manufactured bearings evenly distribute axial load for smooth operation, reducing friction and heat build up. The bearings are protected by seals to prevent dirt and coolant ingress. Modern bevel head design allows unhindered approach of toolholders and lathe tools to the workpiece.

061708 614-00 3MT/4mT Extractor

These Faithfull Centre Points are used for accurate alignment of dowel holes. To use Place the blunt end in a hole already made for dowel in one piece of wood, place the second piece of wood in required position and press down to leave centre of second hole accurately marked. The FAIDOWCENT10 Centre Points have the following specifications Size 10mm. Pack quantity 4.

Centre Points 4 x 10mm FAIDOWCENT10

The Rotur Light Duty Rotating Centre is designed for lighter turning work. It features a 22mm diameter head with a 60 degree point. The centre rotates smoothly even at high loads and speeds thanks to the quality twin deep groove ball races. The sharp point can easily penetrate timber for a very secure grip.

The Rotur Heavy Duty Rotating Centre is machined from high quality EN8M Steel. Available in 1MT. Made in the UK by Planet Plus Ltd

1MT: LD1

Rotur Light Duty Rotating Centre 1MT

The Rotur mini drive centres are suitable for all types of spindle work. The head is 9mm in diameter and is protrudes further from the morse taper and with a narrower shaft than traditional drive centres. The Centre point protrudes further than the prongs for quick and easy alignment. The sharp point and prongs can easily penetrate the timber for a secure grip. The 4-prong head is more suited for squared spindle ends so each prong has equal penetration in the timber for maximum grip. The Centres are easily removed from the lathe with the Rotur knockout bar (TKO265).

The Rotur drive centres are machined from high-quality EN8M Steel. The one-piece design ensures the integral points cant work loose. Available in 1MT and 2MT. Made in the UK by Planet Plus Ltd

1MT: 0941

Rotur Mini Drive Centre 9mm 4 Prong 1MT

Rotur Hollow Ring Centre has a 5/8� diameter head with 5/16� bore. When the centre point is removed, it can facilitate the boring of long holes. The sharp ring centre prevents wood from splitting and can be used as a tail centre. It is supplied complete with the removable point centre and a hex key.

The Rotur lathe centres are machined from high quality EN8M Steel. The one piece design ensures the integral ring cant work loose. Available in 1MT and 2MT. Made in the UK by Planet Plus Ltd

1MT: 5161B

Rotur Hollow Ring Centre 1MT

The Rotur Deluxe Rotating Centre is well suited for turning small and intricate work. The main body remains stationary in the tailstock while small point turns. The angle of the point is 60 degrees, and measures 12mm in diameter. This makes it ideal for smaller precision work as well as general spindle turning because there is less risk of catching your hands or chisels while turning. It also works well as a Pen Mandrel support thanks to the hardened point and narrow body. The triple bearing design incorporates a thrust race for handling high lateral forces.

The Rotur Deluxe Rotating Centre is machined from high quality EN8M Steel and the point is hardened for maximum durability and strength. Available in 1MT and 2MT. Made in the UK by Planet Plus Ltd

1MT: DX1

Rotur Deluxe Rotating Centre 1MT

The Rotur drive centres are suitable for all types of spindle work. The Centre point protrudes further than the prongs for quick and easy alignment.  The sharp point and prongs can easily penetrate the timber for a secure grip.  The 2 Prong drive centres are suited to timber with out of square ends, whereas the 4 prong versions are more suited for squared spindle ends so each prong has equal penetration in the timber for maximum grip. The Centres are easily removed from the lathe with the Rotur knockout bar (TKO265).

The Rotur drive centres are machined from high quality EN8M Steel.  The one piece design ensures the integral points cant work loose.  Available in 1MT and 2MT. Made in the UK by Planet Plus Ltd

1″ 2 Prong 2MT: 0122

Rotur Drive Centre 1" 2 Prong 2MT

The Rotur Hollow Rotating Centre features a 5/16� bore for long hole boring. It is based on The Rotur Standard Duty Rotating Centre and incorporates the twin high quality deep groove ball-bearing races. It is also very useful for spindle turning where there is a danger of the centre point splitting the stock. A removable 60 degree centre point is included for general turning operations.

The Set comprises:

Hollow Rotating Centre
Removable nose cone for use as a standard rotating centre
325mm long centring rod for lining up the centre of a workpiece when the point is removed.

The Rotur Hollow Rotating Centre is machined from high quality EN8M Steel. Available in 1MT and 2MT. Made in the UK by Planet Plus Ltd

1MT:HRC1

Rotur Hollow Rotating Centre - 1MT

The Rotur Standard Duty Rotating Centre is a precision-engineered tool designed and made in the UK for general-purpose woodturning applications. Its sharp 60-degree point and 31mm diameter head make it easy to penetrate timber, providing a secure grip with reduced splintering for a clean finish.

The Rotur Standard Duty Rotating Centre is made from high-quality EN8M Steel, which gives it robustness and durability. This material ensures that the rotating center can withstand high loads and speeds, providing a stable and reliable base for woodturning.

One of the standout features of the Rotur Standard Duty Rotating Centre is its twin high-quality deep groove ball-bearing races, which enable smooth and consistent rotation even when working with heavier or larger pieces of wood. The bearings are designed to reduce friction and wear, making the Rotur Standard Duty Rotating Centre a long-lasting and reliable tool.

Woodturners will appreciate that the Rotur Standard Duty Rotating Centre comes in both 1MT and 2MT sizes, making it compatible with a range of lathes. Its compact and lightweight design makes it easy to install and remove, while the precision engineering ensures that it provides accurate and reliable results every time.

In summary, the Rotur Standard Duty Rotating Centre is an excellent investment for any serious woodworker, providing versatility and reliability for woodturning and general-purpose woodworking applications. Its high-quality construction and advanced features ensure that it provides accurate and consistent results every time.

2MT: SD2

Rotur Standard Duty Rotating Centre 2MT

061038 614-00 4MT Revolving Centre Only

042315 604H 3MT H&G Revolving Centre

070737 616-10 5MT 60Degrees Extended Point

The Rotur Halved Solid Centre features a halved nose making it a specialized tool for turning and machining small projects. This allows for closer tool access to the center of the workpiece, enabling precise and accurate turning.Compatible with a wide range of lathes and turning machines, its robust construction and ability to withstand high loads and pressures make it a reliable and essential component.

2MT: HC2

Find Centre Points Products

We suggest upgrading to Chrome