Brand

Rating

Price

Special Offers

Type

Capacity

Dimensions

Diameter

Material

Length

Width

Magnetic Tooling - Free UK Delivery Over £25 - Buy Online | Zoro

Circular Magnetic Chucks - Standard Pole
Circular chucks are primarily designed to hold work during turning operations on lathes and for grinding on internal, cylindrical or rotary grinders. They are capable of gripping both heavy and light workpieces. A removable handle is used to energise the chuck which can also be partially energised to simplify the correct positioning of the Workpiece. The top plate can be machined within limits to any required shape.

Circular Magnetic Chucks - Standard Pole
Pole spacing = 4mm steel/2mm brass. Force = 80N/cm2.

Rectangular Magnetic Chucks - Fine Pole
Standard range chucks are designed to give high performance combined with competitive pricing. Using high energy rare earth neodymium magnets they give an evenly distributed clamping force. Trouble-free operation is assured with a rugged but accurate build. Each standard magnetic chuck features: brass and steel top plates, removable hexagon key handles that ensure ease of operation through a 180° arc (replacement handles are available on request). All chucks are supplied with side and end stops. All chucks are supplied with clamps and a one year warranty on parts and labour.

Rectangular Magnetic Chucks - Fine Pole
Ideal for thin - medium grinding operations.
Pole spacing = 1.5mm steel/0.5mm brass. Force = 80N/cm2.
They will usually clamp all workpiece thicknesses less than 3mm.

All metal top plates for maximum accuracy, extra thick to provide many years of life even after frequent re-grinding. Chrome plated steel side and end plates for maximum datum accuracy. Lifetime magnetism guarantee, they cannot become demagnetised unless dismantled. Three year's guarantee against faulty materials and workmanship. New ergonomically designed removable handles. Chucks can be partially energised to aid positioning and set-up.

Rectangular Magnetic Chucks - Standard Pole
Standard range chucks are designed to give high performance combined with competitive pricing. Using high energy rare earth neodymium magnets they give an evenly distributed clamping force. Trouble-free operation is assured with a rugged but accurate build. Each standard magnetic chuck features: brass and steel top plates, removable hexagon key handles that ensure ease of operation through a 180° arc (replacement handles are available on request). All chucks are supplied with side and end stops. All chucks are supplied with clamps and a one year warranty on parts and labour.

Rectangular Magnetic Chucks - Standard Pole
Pole spacing = 4mm steel/2mm brass. Force = 80N/cm2.
These chucks are primarily designed for grinding operations.
They will effectively clamp all workpiece thicknesses down to 3mm.

Fine pole. Pole spacing: 1.5mm steel / 0.5mm brass. Force: 80N/cm2

Standard pole.  Pole spacing: 4.0mm steel / 2mm brass.  Force: 80N/cm2

ECFP100 Circular Chuck Fine Pole 100mm Diameter

Ideally suited to thin or small workpieces, this usually means thicknesses less than 3mm.
 Fine Pole.
 Pole spacing: 1.5mm steel / 0.5mm brass.
 Force: 80N/cm2.

ERFP1545 Rectangular Chuck Fine Pole 150 x 450mm

AXS618/P Rectangular Magnetic Chuck

Used for holding work during turning operations on lathes and for grinding on internal, cylindrical or rotary grinding machines. Rigid assembly with thick top plate and operated by a removable handle. 
Magnetic adhesion: 61N/cm2.

AX475C/P Magnetic Lathe Chuck

For use with magnetic chucks that have parallel poles, so that the magnetic field can be extended to hold awkwardly shaped workpieces. Supplied in matched and numbered pairs. Machinable.

950 Magnetic Chuck Blocks (Pair)

These chucks are primarily designed for grinding operations. They will effectively clamp all workpiece thicknesses down to 3mm.
 Standard Pole.
 Pole spacing: 4.0mm steel / 2mm brass.
 Force: 80N/cm2.

ERSP1545 150 x 450mm Rectangular Chuck

Conveniently separates steel sheet to enable easy handling of sheets in vertical and horizontal stacks, can be used with clean, oily or painted sheet. Each unit contains an arrangement of powerful magnets housed in a non ferrous casing.

E913 Magnetic Floaters (Pair)

SSTFP1018 Simple Sine Table 180 x 100mm

Magnetic Wristband 330(L) x 90(W) mm
Weight 0.07KG
Adjustable strap allows a one size fits all
Breathable, lightweight
Embedded with 10 strong magnets perfect for holding screws, nails, drill bits and other tools

MWB157 Magnetic Wristband 330 (L) X 90 (W) MM

ECFP310 Circ. Chuck Fine Pole 310mm Dia

ECSP350 Circ. Chuck Std. Pole 350mm Dia

ProductPage-Title-Mobile

Below

Scheduled_Orders

show_with_global

ProductPage-Add-To-Quotation

show

SearchPage-LeadTimeFilter

ProductPage-Pills-Visibility

Expanded

InfoPage-DiscountCodes

experiment_2

ProductPage-Attribute-Selector

VariantThreeDropDown

SearchPage_Top_Category

Default

SearchPage-FilterPanel-Expanded

Show

Personalised-BoostType

default

Number-Of-Recommendations

seven

SearchPage-SearchResultLimit

Hundred

ProductPage-ViewAll-Terminal-Node

ProductPage_Bundle

three_products

FamilyPage-Attribute-Selector

VariantZeroDropDown

StickyFilterPanel-InfiniteScroll

Hide

SingleLine-ProductHeader-Mobile

SHOW

Previously-Purchased-Tag

Discount-PromoLabel

hide

Sticky-MainMenu

New_Login_Registration_Toggle

ProductPage-AddToBasket-Mobile

ProductPage-Title-Length-Mobile

Vertical-Recommendations_Toggle

SearchPage-Enable-Sort-Attribute-Value

AttributeValueSortOnSearchAndCategory

Recommendations

control

MyaccountPage_Recommendations

SearchPage-BoostType

boost_img_lt_atb

search-templates

defaultTemplate

Header-MainMenu

Payment-GooglePay

SearchPage-InfiniteScroll-Limit

Thousand

Browse our original Eclipse Magnetics products in Magnetic Tooling

We suggest upgrading to Chrome