Brand

Rating

Price

Special Offers

Product Type

Wheel & Tyre Tools - Free UK Delivery Over £25 - Buy Online | Zoro

Easy fluid replacement system using air pressure from the spare wheel to bleed brake and clutch hydraulics. Safe to use, the one-way flow mechanism and airtight seal on the reservoir ensures fast fluid replacement with no contamination. There is no need for pedal pumping which avoids the risk of damaging the master cylinder seal. The versatile kit includes four screw caps (25, 27, 44-45, 46mm) and three hoses, making it easy to connect Eezibleed to a wide variety of vehicles. Suitable for single handed operation. Uses the air pressure from a spare tyre to effortlessly bleed hydraulic systems.Can be used successfully on the following systems: tandem master cylinders without sensors, tandem reservoirs, slave servos, vacuum servos. Includes a range of cap & seal sizes: 25mm (Lockheed systems), 27mm (certain VAG systems), 44/45mm (metal Girling reservoirs & all ATE systems), 46mm (certain Girling systems). Kit contains: pressure bottle (for new brake fluid), bottle cap assembly, bleed tube set, 5x cap & seal sets, brass reservoir cap fitting, 2x fibre washers, lock nut & hook.

Eezibleed Kit

The Trakrite camber bar allows either of the Gunson camber gauges to be used with the wheels on the vehicle and the vehicle sitting on the ground. It is ideal for alloy wheels when the magnetic base of the camber gauge cannot be attached to the wheel hub. The bar is fully adjustable and can either be hung onto the tyre or held in place by hand to provide a precise base point for measurement. When the gauge is levelled and set up, the camber angle, castor and KPI can be clearly read from the gauge. Designed by Gunson in the UK, the Trakrite camber bar makes it quick and easy to take important measurements, even on alloys. Ideal for quick checking of camber, caster and KPI when used with Gunson gauges, Part Nos. 77099, 77066.The camber bar is fully adjustable for wheels up to 18 inch in diameter and designed to hang on the tyre giving hands free operation. Where the vehicle wheel arch is too low for the camber bar to hang on the tyre it can still be used without the top bracket (held in place by hand). For car and light commercial use.

Trakrite Camber Bar - 77137-T

Trakrite is the simplest, most accurate device for checking the wheel alignment of cars, light commercial and vintage vehicles. Properly aligned wheels improve a car's handling, safety and fuel economy and reduce tyre wear. Trakrite makes it is easy to check wheel tracking. Simply drive slowly over the ramp, with the wheels in their straight ahead position and the roller mounted top plate will move to show any toe in or toe out issues. The dial indicator is easy to read and clearly shows the degree of any misalignment. Tracking angles can also be modified to obtain a specific handling characteristic, which can be useful for motorsport and off-road applications. An essential tool for simple and accurate wheel alignment checks and maintenance. Suitable for the professional user, fleet operator or private motorist. Checks the alignment of steering wheels on cars & light commercial vehicles.Easy and simple to operate with no technical knowledge needed. Tests accuracy in only 5 minutes. A roller bearing platform over which one front wheel is slowly driven with the wheels in their straight ahead position. Can be used to track both front drive wheels & rear wheels.

Trakrite Wheel Alignment Gauge

Valve clearance is easy to adjust on all push rod engines or OHC engines with top adjustment.  Clik-adjust makes the job easier and absolutely precise.  This essential clearance adjustment ensures the valves (inlet and outlet) open and close correctly resulting in better engine performance. Adjusts tappets preciselyMicro adjustment No need to use feeler gauge after its set up. Suits all push rod valve engines and OHC engines with Flat head top adjustments screws.1/2"D for any size lock nut.

Clikadjust Tappet Adjuster

This system sets the standard for affordable brake and clutch bleeding systems. Using air pressure from a spare wheel it will effortlessly bleed hydraulic systems. There are a number of adaptors available to fit most vehicles with screw cap reservoirs. Supplied for the French market, complete with French packaging and instructions. Suitable for one man operation.Uses the air pressure from a spare tyre to effortless bleed hydraulic systems. The Eezibleed kits contains a special pressure vessel to hold the new fluid, spare bottle seal part number G4062/80. Can be used successfully on the following systems: Tandem master cylinders without sensors Tandem reservoirs, Slave servos, Vacuum Servos.

Eezibleed French

CheckoutPage-BeforeYouGo

show

Discount-PromoLabel

hide

FamilyPage-Attribute-Selector

VariantThreeDropDown

Header-MainMenu

InfoPage-DiscountCodes

experiment_1

MyaccountPage_Recommendations

New_Login_Registration_Toggle

Number-Of-Recommendations

seven

Payment-GooglePay

Personalised-BoostType

default

Previously-Purchased-Tag

Show

ProductPage_Bundle

three_products

ProductPage-Add-To-Quotation

ProductPage-AddToBasket-Mobile

ProductPage-Attribute-Selector

ProductPage-Pills-Visibility

Expanded

ProductPage-Title-Length-Mobile

ProductPage-Title-Mobile

Below

ProductPage-ViewAll-Terminal-Node

Recommendations

test

Scheduled_Orders

show_with_global

search-templates

defaultTemplate

SearchPage_Top_Category

Default

SearchPage-BoostType

boost_img_lt_atb

SearchPage-Enable-Sort-Attribute-Value

AttributeValueSortOnSearchAndCategory

SearchPage-FilterPanel-Expanded

SearchPage-InfiniteScroll-Limit

Thousand

SearchPage-LeadTimeFilter

SearchPage-SearchResultLimit

Hundred

SingleLine-ProductHeader-Mobile

SHOW

Sticky-MainMenu

StickyFilterPanel-InfiniteScroll

Browse our original Gunson products in Wheel & Tyre Tools

We suggest upgrading to Chrome