Brand

Rating

Price

Special Offers

End Mill Type

Material

Number of Flutes

Overall Length

Shank Diameter

Finish/Coating

Length Type

Material Grade

Milling Application

Shank Type

Special Geometry Cutters - Free UK Delivery Over £25 - Buy Online | Zoro

Series 90 - Regular Series 
Dimensions to DIN 844. Centre cutting. Shank to DIN 1835B. Cutting diameter to js12. Shank diameter to h6. 

The combination of HSS-E PM and TiALN provides a cutter that is ideally suited to dry and semi-dry machining of materials up to 45 HRC, stainless steels and Aerospace alloys.

Series 15 - Regular Length 
Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B. Shank cutting diameter to +0.04  -0.0.

Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

Short Series - 2 Flute - Metric
Centre cutting as standard. An advanced tool geometry designed for cutting aluminium and other non-metallic, non-ferrous materials requiring high machining rates. Al-Karb cutters will out-perform conventional end mills on these material­s as the flute design allows maximum chip removal.

Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080.

Series 20 - Regular Length, TiN Coated
Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B.  Shank diameter to h6.

Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

Series 92 - Long Series 
Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B. Cutting diameter to k10. Shank diameter to h6.

 The combination of HSS-E PM and TiALN provides a cutter that is ideally suited to dry and semi-dry machining of materials up to 45 HRC, stainless steels and Aerospace alloys.

Series 20 - Regular Length 
Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B.  Shank diameter to h6.

Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

AES-2
For profiling, slotting and drilling with special geometry for aluminiums, copper alloys and other non-ferrous materials. Very sharp edges for smooth action in soft materials minimising chip sticking to the edge. Centre cutting for drilling.

1930M Combination Shank
Centre cutting as standard. Operate at higher speeds and feeds than conventional shank milling cutters, removing more metal per minute. Power and ­workholding rigidity must be checked carefully before use. It is ­recommend that cutters are used with a consistent power feed to eliminate backlash. The unique cutting geometry gives a more efficient cutting action and reduced cutting time. High speed steel is less ­likely to chip or fracture reducing tool maintenance costs. Long cut lengths allow deeper axial cuts and greater metal removal per cut.

930MP Weldon Shank Polished
Centre cutting as standard. Operate at higher speeds and feeds than conventional shank milling cutters, removing more metal per minute. Power and ­workholding rigidity must be checked carefully before use. It is ­recommend that cutters are used with a consistent power feed to eliminate backlash. The unique cutting geometry gives a more efficient cutting action and reduced cutting time. High speed steel is less ­likely to chip or fracture reducing tool maintenance costs. Long cut lengths allow deeper axial cuts and greater metal removal per cut.

10MM HSS-Cobalt Weldon 45 Degree High Helix End Mill

6.0 42DEG Weldon Standard High Helix 2FL S/Drill-8% Co

Short Series - 2 Flute - Metric
Centre cutting as standard. An advanced tool geometry designed for cutting aluminium and other non-metallic, non-ferrous materials requiring high machining rates. Al-Karb cutters will out-perform conventional end mills on these material­s as the flute design allows maximum chip removal.

Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080.

12.0MM 2FL Carbide Al-Karb Milling Cutter

16.0 37DEG TiN High Helix 3F L R-e/Mill-alum

Series 92 - Long Series 
Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B. Cutting diameter to k10. Shank diameter to h6.

 The combination of HSS-E PM and TiALN provides a cutter that is ideally suited to dry and semi-dry machining of materials up to 45 HRC, stainless steels and Aerospace alloys.

10MM HSS-Cobalt PM L/S Weldon High Helix End Mill TiAlN

6.0 37DEG High Helix 3FL Rough End Mill - Aluminium

Gripple HANGER CENTRAL EXIT ANGEL HELIX NO.1 0-15KG GALV 1M WIRE ROP Helix Central Exit AL1-CHX-BB6-1M

Hanger Central exit Angel Heli x No.1 0-15Kg Galvanised 1M Wire Rop

AES-2
For profiling, slotting and drilling with special geometry for aluminiums, copper alloys and other non-ferrous materials. Very sharp edges for smooth action in soft materials minimising chip sticking to the edge. Centre cutting for drilling.

AES-2060 2FL Slot Drill Aluminium

1930M Combination Shank
Centre cutting as standard. Operate at higher speeds and feeds than conventional shank milling cutters, removing more metal per minute. Power and ­workholding rigidity must be checked carefully before use. It is ­recommend that cutters are used with a consistent power feed to eliminate backlash. The unique cutting geometry gives a more efficient cutting action and reduced cutting time. High speed steel is less ­likely to chip or fracture reducing tool maintenance costs. Long cut lengths allow deeper axial cuts and greater metal removal per cut.

1930M-3253 32X53 3FL Ripp AL M/Cutter

The 930MP 'Rippal' cutters have polished flutes making suitable for use when cutting aluminium to ensure optimum swarf removal.

930MP-4063-32 40X63 3FL Polished Flute

OSG WX-PHS short series endmills are manufactured from high performance micro grain carbide with an Ultra WX coating (multi layered composite TiALN).

For contouring and slotting, roughing and finishing.
For stainless, titanium and steels 10 to 52 HRC.
Centre cutting. Cutting length: 1.5 x D.

The Ultra WX coating has been developed to improve performance in a wide range of materials including nonferrous materials, mild steels, and refined steels This stable performance remains consistent in both wet and dry applications and is intended for a wide range of cutting conditions, from low speed/reduced cutting force applications to high speed/high cutting force applications.

For all technical and dimensional specifications please refer to our catalogue.

3016080 Wx-Phs Series 4 Flute End Mill 45 Helix Plain Shank Carbide

930MP-1016 930MP Series 3 Flute 'Rippal' Ripper Cutters Weldon Shank HSS-Co 8%

930MP-2238 930MP Series 3 Flute 'Rippal' Ripper Cutters Weldon Shank HSS-Co 8%

1930M-3210 32x106 3FL Rip Pal M/Cutter

930M-2590 25x90 3FL Rippal M/Cutter

3041-5 5mm 3FL Hi-helix End Mill

4mm Carbide 60 Degree TiAlN 0.25mm

Scheduled_Orders

show_with_global

SearchPage-Enable-Sort-Attribute-Value

AttributeValueSortOnSearchAndCategory

ProductPage-Add-To-Quotation

show

ProductPage-AddToBasket-Mobile

hide

New_Login_Registration_Toggle

InfoPage-DiscountCodes

experiment_1

Previously-Purchased-Tag

Show

Recommendations

control

Number-Of-Recommendations

seven

Header-MainMenu

SearchPage-FilterPanel-Expanded

ProductPage_Bundle

two_products

ProductPage-Attribute-Selector

VariantThreeDropDown

FamilyPage-Attribute-Selector

Discount-PromoLabel

CheckoutPage-BeforeYouGo

SearchPage-LeadTimeFilter

SearchPage-SearchResultLimit

Hundred

Personalised-BoostType

personalised_boost_v1

ProductPage_BuyNow

ProductPage-ViewAll-Terminal-Node

ProductPage-Title-Length-Mobile

StickyFilterPanel-InfiniteScroll

Hide

SingleLine-ProductHeader-Mobile

SHOW

SearchPage-BoostType

boost_img_lt_atb

ProductPage-Title-Mobile

Below

Vertical-Recommendations_Toggle

ProductPage-Pills-Visibility

Expanded

Sticky-MainMenu

Payment-GooglePay

SearchPage-InfiniteScroll-Limit

Thousand

SearchPage_Top_Category

search-templates

defaultTemplate

Find Special Geometry Cutters Products

We suggest upgrading to Chrome