Brand

Rating

Price

Special Offers

Pipe Marker - Free UK Delivery Over £25 - Buy Online | Zoro

Aids in the setting of center lines, establishing angles and marks for butt-ins, location points inside pipes and tanks, laying out key ways, and measuring declivity. ,Used on pipe 1/2” diameter and larger. fitted with an adjustable dial set level (DSL) and a manually operated hardened centering pin ,4 inch Y-type head ,Fitted with an adjustable dial bubble protractor (DSL) ,Use this manually operated Jackson Safety hardened centering pin with a small hammer or mallet to tap the pin in for effective pipe marking

J1879 Centering Head Standard Welding Tool

The Dial Set Level (DSL) is an adjustable bubble protractor used with a number of Curv-O-Mark tools ( #4, #6, #7, #8, #20 and #33). ,Protractor covers 180-degrees through two 90-degree quadrants ,Reads in 2.5-degree increments ,Made of durable, lightweight cast aluminium ,Replacement Part

J1905 Dial & Level

Aids in the setting of center lines, establishing angles and marks for butt-ins, location points inside pipes and tanks, laying out key ways, and measuring declivity. ,Ideal for 1" pipe diameter and larger. ,8 inch Y-type head ,Fitted with an adjustable dial bubble protractor (DSL) ,A spring loaded hardened centering pin eliminates the need for a hammer.

J1880 Centering Head Jumbo Welding Tool

Up to 20 Inches (50,8 cm) in radius ,Made with an anodized rust proof aluminium for lasting protection ,Arms are precisely aligned with spring tension joints to guarantee accuracy and rigidity ,Holder will accept round, square or flat soap stone crayon, pencil or steel point scribe ,Folding type design.It will fit conveniently in a shirt pocket

J1885 Radius Marker Small

A lightweight, easy to use tool for determining angles. Unit is ideal for the pipe fitter, welder, jig builder or anyone who has to determine angles or do setup work. ,Includes two cast-in 25-pound pull magnets that hold securely to any steel surface. Measures 9” long x 2” high and 3/4” thick ,Unit has a 360-degree adjustable dial set level (DSL) with two 90-degree quadrants graduated in 2.5-degree increments. ,Cast in tables are used to convert degree-of-angle to rise-in-inches-per-foot or millimetres-per-meter ,A groove on the bottom edge permits use on a small pipe.

J1881 Pro-mag Level Angel Determining Tool

Made with an anodized rust proof aluminum for lasting protection ,Arms are precisely aligned with spring tension joints to guarantee accuracy and rigidity ,Holder accommodates flat or round soapstone and pencils ,Folding type design.  Mini, small, and standard models will fit conveniently in a shirt pocket ,

J1887 Radius Marker Jumbo

Up to 8 Inches (20,3 cm) in Radius ,Made with an anodized rust proof aluminium for lasting protection ,Arms are precisely aligned with spring tension joints to guarantee accuracy and rigidity ,Holder will accept round, square or flat soap stone crayon, pencil or steel point scribe ,Folding type design.It will fit conveniently in a shirt pocket

J1884 Radius Marker Mini

Up to 24 Inches (61 cm) in radius ,Made with an anodized rust proof aluminium for lasting protection ,Arms are precisely aligned with spring tension joints to guarantee accuracy and rigidity ,Holder will accept round, square or flat soap stone crayon, pencil or steel point scribe ,Folding type design.It will fit conveniently in a shirt pocket

J1886 Radius Marker Standard

A hardened steel pin for use with the standard centering head. ,Brand: Jackson Safety ,Part number: J1906 , ,

J1906 Centering Pin

Removes the difficulty of flange aligning and squaring ,Tool holds a square in the needed position without tying up one's hands ,Base is notched at either end for ease in aligning on the center line of the pipe ,Two 25-pound pull, cast-in magnets for holding either a flat horizontal or vertical position ,Base accepts either leg of a standard or combination square and works on pipe diameters from 1" on up, requiring only the extension of the legs of the square being used to accommodate larger diameters

J1903 Flange Aligner Base

Using standard half inch pipe as a trammel bar, heads feature radius set points cast in alignment with marking pointers for easy setting ,Equipped with 1/4” screws and squared on the back side of perpendicular alignment. ,The stationary head holds a 1/4” case hardened center point. Moveable head has a 1/8” steel scribe hardened. ,Marks from 1-1/2” circle to any diameter needed, depending on length of pipe used as a trammel bar ,Allen wrench, soapstone, scribe and pointer also included.

J1890 Multi Trammel Heads

Scheduled_Orders

show_with_global

SearchPage-Enable-Sort-Attribute-Value

AttributeValueSortOnSearchAndCategory

ProductPage-Add-To-Quotation

show

ProductPage-AddToBasket-Mobile

hide

New_Login_Registration_Toggle

InfoPage-DiscountCodes

experiment_2

Previously-Purchased-Tag

Show

Recommendations

test

Number-Of-Recommendations

seven

Header-MainMenu

SearchPage-FilterPanel-Expanded

ProductPage_Bundle

three_products

ProductPage-Attribute-Selector

VariantThreeDropDown

FamilyPage-Attribute-Selector

Discount-PromoLabel

CheckoutPage-BeforeYouGo

SearchPage-LeadTimeFilter

SearchPage-SearchResultLimit

Hundred

Personalised-BoostType

default

ProductPage_BuyNow

ProductPage-ViewAll-Terminal-Node

ProductPage-Title-Length-Mobile

StickyFilterPanel-InfiniteScroll

Hide

SingleLine-ProductHeader-Mobile

SHOW

SearchPage-BoostType

boost_img_lt_atb

ProductPage-Title-Mobile

Below

Vertical-Recommendations_Toggle

ProductPage-Pills-Visibility

Expanded

Sticky-MainMenu

Payment-GooglePay

SearchPage-InfiniteScroll-Limit

Thousand

SearchPage_Top_Category

7-20

search-templates

defaultTemplate

Find Pipe Marker Products

We suggest upgrading to Chrome