Brand

Rating

Price

Special Offers

Torque Calibration Accessories - Free UK Delivery Over £25 - Buy Online | Zoro

Teeth offset against direction of rotation  Roller secured against loss  Mouth position 45° angled  Teeth offset against direction of rotation  Jaws polished  Captive adjusting nut  Chrome-vanadium steel

038700 Capture Display Kit

36246 Capture & XR Sensor Cable

038160 Capture Lite CL400 10-400 N.m Torque wrench checker

038160 Capture Lite CL400 10-400 N.m Torque Wrench Checker

suitable for tool trolley MECHANIC 2046.10 / 2046.20  Square plug-in handle 1/4", 1-component handle with female square  Socket 1/4" hexagon: Metric, short, to DIN 3124, ISO 2725  Screwdriver bit socket 1/4" for in-hex screws: Pressed-in, phosphated pin  Screwdriver bit socket 1/4" slotted, PH, PZ, TX with drill hole: Pressed-in, phosphated pin  Socket extension 1/4"  Sliding T-handle with slide 1/4": Acc. to DIN 3122, ISO 3315  Universal joint 1/4": Joint bolted on, design to DIN 3123 - C 6.3  2C reversible ratchet 1/2": To DIN 3120 - A 12.5, ISO 1174, lever for right and left-hand operation, push button release, fine-toothed, oval form, 2-component-handle  Socket extension 1/2"  Sliding T bar 1/2", with slide, to DIN 3122, ISO 3315  Universal joint 1/2": Joint bolted on, design to DIN 3123 - C 12.5  Socket, hex: Metric, short, to DIN 3124, ISO 272  Screwdriver bit socket 1/2" for in-hex screws: Pressed-in, phosphated pin  Combination spanner: To DIN 3113, Form A ISO 3318, ISO 7738, ring side angled 15° jaw position, surface matt satin, plate-chromed  Hexagon socket key set: To DIN ISO 2936, hardened throughout, phosphated  Chrome-vanadium steel  Water pump pliers: To DIN 8976 Form C, lengthways-serrated gripping surfaces, box joint, 7 settings, chrome vanadium steel, powder-coated  Combination pliers: To DIN ISO 5746, inductively hardened cutting edges, 2-component-handle, forged  Bent nose telephone pliers: To DIN ISO 5745, straight gripping surfaces, lengthways-serrated, inductively hardened cutting edges, 2-component-handle, forged  Side cutters: To DIN ISO 5749, slender head, inductively hardened, long cutting edges, 2-component-handle, forged  Engineers’ hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge  Flat cold chisel, flat oval: To DIN, cutting edge and head ground, impact end tempered, chrome-vanadium steel  Cross-cut chisel, flat oval: To DIN 6451, cutting edge, sides and head ground, impact end tempered, chrome-vanadium steel  Hexagonal punch: To DIN 6458, impact end annealed, chrome-vanadium steel  Centre punch, hexagonal: To DIN 7250, impact end annealed, chrome-vanadium steel  Pin punch, octagonal: To DIN 6450, impact end annealed, chrome-vanadium steel  2C screwdriver slotted and PH: To DIN, high-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, 2-component-handle, 5-edge grip head, elongated hole in handle  2C screwdriver TX: Chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, 2-component-handle, 5-edge grip head, elongated hole in handle  Tape measure: ABS dual-material housing, clip, nylon-coated tape, mm-graduation, with tape rewind and lock, magnetic stop, Accuracy Class II

Tool set 8xCT modules 119pcs

Working platform with ABS top  Side frame with square perforation for accessories  6 drawers with telescopic full extension and individual locking device (single-hand operation)  Individual locking device on every drawer prevents them from opening when the trolley is in motion  Load capacity 25 kg per drawer, variable partitionable  Drawer size inside: W 482 x D 345 mm, front height 4x 69 mm, 1x 144 mm, 1x 218 mm  Central locking with cylinder lock, supplied with two keys  Two swivel castors Ø 100 mm, one with double wheel locking, two fixed castors Ø 140 mm, laterally protruding, therefore high stability  Load capacity 210 kg  Dimensions: H 910 x W 628 x D 418 mm (without handle)  2 swivel casters Ø 100 mm, 1x with double-stop wheel lock, 2 castors Ø 140 mm, side projecting thus affording considerable stability

Tool set i.t.trolley MECHANIC red 119pcs

Solid sheet steel construction, torsion-resistant, high load capacity  Working platform with ABS top  Side frame with square perforation for accessories, with paper roll holder, can holder, waste basket  Large manoeuvring handle on both sides  7 drawers with telescopic full-extension runners with individual locking (one-hand operation)  The individual drawer locking stops more than one drawer being opened - provides for considerable stability  Load capacity 35 kg per drawer  Drawer size inside: W 570 x D 410 mm  5 drawers, front height 83 mm  2 drawers front height 155 mm  Drawers with anti-slip mat  Central locking with cylinder lock with 4 keys  Two swivel castors Ø 125 mm, with brake, two fixed castors

Tool trolley WINGMAN 7draw. 1034x724x470

Working platform with ABS top  Side frame with square perforation for accessories, with paper roll holder, can holder, waste basket  Large handle on either side  7 drawers with telescopic full extension and individual locking device (single-hand operation)  Individual locking device on every drawer prevents them from opening when the trolley is in motion, therefore high stability  Load capacity 35 kg per drawer  Drawer size inside: W 570 x D 410 mm  5 drawers front height 83 mm  2 drawers front height 155 mm  Drawers with anti-slip mat  Drawers with anti-slip mat  Central locking with cylinder lock with 4 keys  Two swivel castors Ø 125 mm, with brake, two fixed castors

Tool set in t.trolley WINGMAN red 129pcs

suitable for tool trolley MECHANIC, WINGMAN 2054.10 / 2057.10  Side cutters: To DIN ISO 5749, slender head, inductively hardened, long cutting edges, 2-component-handle, forged  Bent nose telephone pliers, straight: To DIN ISO 5745, straight gripping surfaces, lengthways-serrated, inductively hardened cutting edges, 2-component-handle, chrome-vanadium steel  Water pump pliers: To DIN 8976 Form C, lengthways-serrated gripping surfaces, box joint, 7 settings, chrome vanadium steel, powder-coated  2C screwdriver: Slot and cross-slotted PH, to DIN, high-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, 2-component-handle, 5-edge grip head, elongated hole in handle  2C screwdriver TX: Chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, 2-component-handle, 5-edge grip head, elongated hole in handle  Engineers’ hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge  Flat cold chisel, flat oval: To DIN 6453, cutting edge and head ground, impact end tempered, chrome-vanadium steel  Cross-cut chisel: To DIN 6451, cutting edge, sides and head ground, impact end tempered, chrome-vanadium steel  Hexagonal punch: To DIN 6458, impact end annealed, chrome-vanadium steel  Centre punch, hexagonal: To DIN 7250, impact end annealed, chrome-vanadium steel  Pin punch, octagonal: To DIN 6450, impact end annealed, chrome-vanadium steel

Tool set BASIS tools 1/1 CT-module 23pcs

Large carrying handles on either side  3 drawers with telescopic full extension and individual locking device (single-hand operation)  Individual locking device on every drawer prevents them from opening when the trolley is in motion, therefore high stability  Load capacity 35 kg per drawer  Drawer size inside: H 570 x D 410 mm  3 drawers front height 83 mm  Drawers with anti-slip mat  Generous storage under lid, lid with brake, opening angle 90 degrees, usable as work surface  Compartment size: W 520 x D 400 x H 70 mm  Central locking with cylinder lock, supplied with two keys  Internal shelf dimensions: W 520 x D 400 x H 70 mm  Central locking with cylinder lock with 2 keys  Can holders on either side  Without tools

Tool chest WINGMAN 3draw. 446x724x470

Tool set in CT module 13 pcs

Strong, sheet steel construction, torsionally rigid, designed to take high loads  988 x 431 mm working platform made of wood, 30 mm thick  Sides with Euro-standard square perforation for accessories  6 drawers telescopically fully extendable with individual locking  (one-hand operation)  Internal size of storage space: H 720 x W 355 x D 380 mm  The individual locking device - unlockable only with a practical, concealed release bar - prevents the drawer being opened when the trolley is in motion  Each variably compartmentalised drawer can hold 25 kg  Drawer size inside: W 482 x D 345 mm, front height 4x 69 mm, 1x 144 mm, 1x 218 mm  Central locking with cylinder lock complete with 4 keys  2 swivel casters Ø 100 mm of which one has a double-stop wheel lock, 2 castors Ø 140 mm, side projecting thus affording considerable stability  2 swivel casters Ø 100 mm of which one has a double-stop wheel lock, 2 castors Ø 125 mm, side projecting thus affording considerable stability  Central locking with cylinder lock with 4 keys  2 swivel casters Ø 100 mm of which one has a double-stop wheel lock, 2 castors Ø 140 mm, side projecting thus affording considerable stability  Without tools

Tool trolley MECHANIC+ 6draw 988x431x935

Test adapter for adjustment and recalibration of WSTT welding studs test torque wrenches  With 1/4" inch external square for adaptation to torque testers

Browse our original Gedore products in Torque Calibration Accessories

We suggest upgrading to Chrome